Tom Woods Custom Rear 1350 Drive Shaft Installation guide
- Type
- Installation guide
TOM WOODS CUSTOM REAR 1350 DRIVE SHAFT
FOR JEEP WRANGLER JL WITH DANA 44 REAR AXLE
A MEASUREMENT IS REQUIRED IN ORDER TO BUILD THE DRIVE SHAFT. PLEASE MAKE SURE THE LENGTH IS TAKEN FROM
THE VEHICLE WITH ALL THE WEIGHT DOWN ON THE WHEELS. DO NOT TAKE MEASUREMENT WITH VEHICLE ON A LIFT.
PLEASE NOTE: DRIVE SHAFTS SHIPS PAINTED BLACK – NOT POLISHED AS SHOWN BELOW.
-
1
Tom Woods Custom Rear 1350 Drive Shaft Installation guide
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI