2. Baxton Studio
  3. RH253P-Natural Rattan/Dark Brown-5PC

Baxton Studio RH253P-Natural Rattan/Dark Brown-5PC, RH253P-Walnut Rattan-5PC Assembly Instructions

  • Hello! I've reviewed the assembly instruction for the 253P chair. This document contains detailed steps for assembling the chair, including a parts list and guidance on how to avoid damaging components. I'm ready to answer your questions about the assembly process.
  • What should I do before starting assembly?
    What is the recommended way to tighten screws during assembly?
    What safety precautions should I keep in mind?
ASSEMBLY INSTRUCTION MODEL : 253P
Read this instruction carefully. Remove all wrapping material, staples and straps
from the carton. See hardware and furniture part list for guidance. Be sure you have
all wooden furniture parts on a clean and flat soft surface, such as a carpet or rug,
to prevent from being scratched.Follow the figure to start assembling.
CAUTION :
1. Do not FULLY - TIGHTEN the nut or screw untill all is ready to assemble.
2. Do not OVER - TIGHTEN the nut or screw to avoid causing damages to the thread.
3. Keep all hardware part out reach of children.
COMPLETE
ASSEMBLE
STEP 1.1
Firstly, stick F to C for both left and
right side. C
F
STEP 1.2
Then, attached STEP 1.1 to B
according to the hole and tighten it
using hardware number 2,3,4 and 7.
2
3
4
C
7
C
B
STEP 1.3
Align and tighten one side of part E
to B using hardware number 6.
6 X 2PCS
STEP 2.1
Continued with combine the whole
part from STEP1.3 to A . Tighten the
part of C and A using hardware
number 3,1 and 7 . Then cover the
hole with G.
C
A
31
7
C
A
STEP 2.1
Next, combine the other part of E to
A using hardware number 6 .
6 X 2PCS
E
A
STEP 3 STEP 4
E
B
PART LIST
NO QTY
ABACK REST
BFRONT LEG
CSIDE RAIL 2 PCS
D1 PC
1 PC
1 PC
DESCRIPTION
NO QTY
1
JCBC SCREW M6 X 50MM 2 PCS
2
3
4
SPRING WASHER 6 PCS
M4 ALLEN KEY 1 PC
CSK SCREW M4 x 30MM
WOOD DOWEL Ø8 x 30MM 4 PCS
55
6
E
7
STRETCHER 2 PCS
CSK SCREW M4 x 38MM 4 PCS
JCBC SCREW M6 X 70MM 4 PCS
FCENTER SUPPORT 1 PC
GWOOD BUTTON 4 PCS
4 PCS
G
BENT WOODEN SEAT
BENT
WOODEN
SEAT
5 X 4PCS
D
Stick the whole assemble part to D
according to the marked and
fully-tighten it with hardware number 5 .
Read this instruction carefully. Remove all wrapping material, staples and straps from the carton. See hardware and furniture part list
For guidance. Be sure you have all wooden furniture parts on a clean and flat soft surface, such as a carpet or rug, to prevent from being
scratched.Follow the figure to start assembling.
ATABLE TOP
BTABLE LEG 4 PCS
1 PC 1
2
3
4
8 PCS
FLAT WASHER 5 / 16"
SPRING WASHER 5 / 16"
SPANNER 12.8 1 PC
8 PCS
8 PCS
B
A
2
3
1
4
HEX.COM SCREW 5 / 16" X 80MM
B
B
A
B
B
CAUTION :
1. Do not FULLY - TIGHTEN the nut or screw until all is ready to assemble.
2. Do not OVER - TIGHTEN the nut or screw to avoid causing damage to the thread.
3. Keep all hardware part out of reach of children at all times.
900 x 900MM
/