Sceptre X460 User manual

- 1 -

www.SCEPTRE.com

SCEPTRE X460 HDTV User Manual

Dear Sceptre Customer,

Congratulations on your new 120hz Motion Blur Free SCEPTRE X460 High

Definition LCD Television purchase. Thank you for your support. To ensure

safety and many years of trouble free operation of your TV, please read the

manual carefully before making any adjustments, and keep them in a safe

place for future reference. We hope you enjoy your new SCEPTRE X460

High Definition LCD Television.

For technical assistance, please call 1800-788-2878 and select option 3 or

email our tech support group at monitor-ts@sceptre.com.

For all other inquiries, please call 1800-788-2878 and select option 4 or

email our customer service group at [email protected]

.

We recommend you register your SCEPTRE X460 HDTV with the enclosed

registration card and mail it in. For peace of mind and to protect your

investment beyond the standard warranty, SCEPTRE offers a two year

extended warranty service for your TV. This plan gives additional coverage

once your standard warranty period runs out. Please call our customer

service group to purchase the extended warranty.

- 2 -

www.SCEPTRE.com

SCEPTRE X460 HDTV User Manual

IMPORTANT INFORMATION

- 3 -

www.SCEPTRE.com

SCEPTRE X460 HDTV User Manual

SAFETY INSTRUCTIONS

Electricity is used to perform many useful functions, but it can also cause

personal injuries and property damage if improperly handled. This product

has been engineered and manufactured with the highest priority on safety.

However, improper use can result in electric shock and / or fire. In order to

prevent potential danger, please observe the following instructions when

installing, operating and cleaning the product. To ensure your safety and

prolong the service life of your Liquid Crystal Television, please read the

following precautions carefully before using the product.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug.

A polarized plug has two blades with one wider than the other. A

grounding type plug has two blades and a third grounding prong. The

wide blade and the third prong are provided for your safety. If the

provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at

the plugs, convenience receptacles, and the point where they exit from

the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid injury from

tip-over.

13. Unplug this apparatus during lightening storms or when unused for long

periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power-

supply cord or plug is damaged, liquid has been spilled or objects have

fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

- 4 -

www.SCEPTRE.com

SCEPTRE X460 HDTV User Manual

SAFETY INSTRUCTIONS

This product is designed and manufactured to operate within defined design limits, and

misuse may result in electric shock or fire. To prevent the product from being damaged,

the following rules should be observed for the installation, use and maintenance of the

product. Read the following safety instructions before operating the display. Keep these

instructions in a safe place for future reference.

• To avoid the risk of electric shock or

component damage, switch off the

power before connecting other

components to the X460 LCD TV.

• Unplug the power cord before

cleaning the X460 LCD TV. Please

use the included custom bezel

cleaning cloth for cleaning the bezel of

the X460 LCD TV only. Do not use a

liquid or a spray cleaner for cleaning

the product. Do not use abrasive

cleaners.

• Always use the accessories

recommended by the manufacturer to

insure compatibility.

• When moving the X460 LCD TV from

an area of low temperature to an area

of high temperature, condensation

may form on the housing. Do not turn

on the X460 LCD TV immediately after

this to avoid causing fire, electric

shock or component damage.

• Do not place the X460 LCD TV on an

unstable cart, stand, or table. If the

X460 LCD TV falls, it can injure a

person and cause serious damage to

the appliance. Use only a cart or stand

recommended by the manufacturer or

sold with the X460 LCD TV.

• Any heat source should maintain a

distance of at least 5 feet away from

the X460 LCD TV, i.e. radiator, heater,

oven, amplifier etc. Do not install the

product too close to anything that

produces smoke or moisture.

Operating the product close to smoke

or moisture may cause fire or electric

shock.

• Slots and openings in the back and

bottom of the cabinet are provided for

ventilation. To ensure reliable

operation of the X460 LCD TV and to

protect it from overheating, be sure

these openings are not blocked or

covered. Do not place the X460 LCD

TV in a bookcase or cabinet unless

proper ventilation is provided.

• Never push any object into the

ventilation slots of the X460 LCD TV.

Do not place any objects on the top of

the Product. It could short circuit parts

causing a fire or electric shock. Never

spill liquids on the X460 LCD TV.

• Do not use the X460 LCD TV in a

portrait format (by rotating 90 degrees)

under high temperature environment

(25°C or higher), since this would

retard heat dissipation and would

eventually damage the TV.

• The X460 LCD TV should be operated

only from the type of power source

indicated on the label. If you are not

sure of the type of power supplied to

your home, consult your dealer or

local power company.

• The power cable must be replaced

when using different voltage from that

specified in the User Manual. For

more information, contact your dealer.

• The X460 LCD TV is equipped with a

three-pronged grounded plug, a plug

with a third (grounding) pin. This plug

will fit only into a grounded power

outlet as a safety feature. If your outlet

does not accommodate the three-wire

- 5 -

www.SCEPTRE.com

SCEPTRE X460 HDTV User Manual

plug, have an electrician install the

correct outlet, or use an adapter to

ground the appliance safely. Do not

defeat the safety purpose of the

grounded plug.

• Do not overload power strips and

extension cords. Overloading can

result in fire or electric shock.

• The wall socket should be installed

near the equipment and should be

easily accessible.

• Only the marked power source can be

used for the product. Any power

source other than the specified one

may cause fire or electric shock.

• Do not touch the power cord during

thunderstorms. To avoid electric shock,

avoid handling the power cord during

electrical storms.

• Unplug the unit during a lightning

storm or when it will not be used for a

long period of time. This will protect

the X460 LCD TV from damage due to

power surges.

• Do not attempt to repair or service the

product yourself. Opening or removing

the back cover may expose you to

high voltages, the risk of electric shock,

and other hazards. If repair is required,

please contact your dealer and refer

all servicing to qualified service

personnel.

• Keep the product away from moisture.

Do not expose this appliance to rain or

moisture. If water penetrates into the

product, unplug the power cord and

contact your dealer. Continuous use in

this case may result in fire or electric

shock.

• Do not use the product if any

abnormality occurs. If any smoke or

odor becomes apparent, unplug the

power cord and contact your dealer

immediately. Do not try to repair the

product yourself.

• Avoid using dropped or damaged

appliances. If the product is dropped

and the housing is damaged, the

internal components may function

abnormally. Unplug the power cord

immediately and contact your dealer

for repair. Continued use of the

product may cause fire or electric

shock.

• Do not install the product in an area

with heavy dust or high humidity.

Operating the product in environments

with heavy dust or high humidity may

cause fire or electric shock.

• Hold the power connector when

removing the power cable. Pulling the

power cable itself may damage the

wires inside the cable and cause fire

or electric shocks. When the product

will not be used for an extended

period of time, unplug the power

connector.

• To avoid risk of electric shock, do not

touch the connector with wet hands.

• Insert batteries in accordance with

instructions while using the remote

control. Incorrect polarities may cause

damage and leakage of the batteries,

operator injury and contamination the

remote control.

• If any of the following occurs please

contact the dealer:

o The power connector fails

or frays.

o Liquid sprays or any object

drops into the X460 LCD

TV.

o The Display is exposed to

rain or other moisture.

o The Display is dropped or

damaged in any way.

o The performance of the

Display changes

substantially.

• Operating environment: Temperature:

5°C ~ 35°C, Humidity: 10% to 90%

non-condensing, Altitude: 0~10,000 ft.

- 6 -

www.SCEPTRE.com

SCEPTRE X460 HDTV User Manual

IMPORTANT INFORMATION

Television Antenna Connection Protection

External Television Antenna Grounding

If an outside antenna or cable system is to be connected to the LCD TV, make sure that

the antenna or cable system is electrically grounded to provide some protection against

voltage surges and static charges. Article 810 of the National Electrical Code,

ANSI/NFPSA 70, provides information with regard to proper grounding of the mast and

supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of

the grounding conductors, location of antenna discharge unit, connection to grounding

electrodes, and requirements of the grounding electrode.

Lightning Protection

For added protection of the LCD TV during a lightning storm or when it is left

unattended or unused for long periods of time, unplug the LCD TV from the wall outlet

and disconnect the antenna or cable system.

Power Lines

Do not locate the antenna near overhead light or power circuits, or where it could fall

into such power lines or circuits.

- 7 -

www.SCEPTRE.com

SCEPTRE X460 HDTV User Manual

Opening the Package

The SCEPTRE X460 is packaged in a carton. Any standard accessories are packed

separately in another carton. The weight of the LCD display is approximately 71 lbs.

Due to the size and weight of the product, it is suggested that it must be handled by a

minimum of 2 or more persons. Since the glass can be easily scratched or broken,

please handle the product gently. Never place the unit on a surface with the glass facing

downwards unless it is on protective padding. When opening the carton, check that the

product is in good condition and that all standard accessories and items are included.

Save the original box and all packing materials for future shipping needs.

Package Contents

SCEPTRE X460 LCD TV Display x 1

TV Stand x 1

User Manual x 1

L shape screwdriver x 1

Power Cord x 1

Warranty / Registration Card x 1

X460 Remote Control (AAA Batteries included) x 1

HDMI Cable x 1

Installation

Please read the user manual carefully before performing the installation. Because of

the size of the panel, the X460 LCD TV will take 10 – 12 seconds to power on. The

typical power consumption of the display is approximately 80 watts. Please use the

power cord designated for the product. When an extension cord is required, use one

with the correct power rating. The cord must be grounded and the grounding feature

must not be defeated. The product should be installed on a flat surface to avoid tipping.

Space should be maintained between the back of the product and the wall for proper

ventilation. If you would like to mount the TV onto the wall, please see page 9, 10, and,

12 for additional information. Avoid installing the product in the kitchen, bathroom or

other places with high humidity dust or smoke, so as not to shorten the service life of

the electronic components. Please ensure the product is installed with the screen in

landscape orientation. Any 90° clockwise or counterclockwise installation may induce

poor ventilation and successive component damage.

- 8 -

www.SCEPTRE.com

SCEPTRE X460 HDTV User Manual

Installing the Stand

The following instruction set requires two or more people to perform. One person

needs to hold the stand while the other person tightens each screw.

1. Take the TV and place it on a table flat on its back with the screen facing up.

2. Take the stand assembly and connect it to the TV. Hold the stand in position

while the second person tightens the screws.

3. Once the four screws are tightened, you can set the TV up for watching.

Please Note:

• The bottom circular plate has an arrow. That arrow should points to the

same side the LCD screen is facing. Please keep it centered when

installing the stand.

- 9 -

www.SCEPTRE.com

SCEPTRE X460 HDTV User Manual

Removing the Stand

1. Please handle the TV with two or more people. Please locate a large flat surface

(i.e. table) and put a soft cloth (i.e. blanket) on the surface. Please set the TV

facing down on the flat surface so the panel does not get damaged.

2. Take a look at the neck plate that’s connected to the TV. There should be 6 screws

on the neck plate. Remove the 6 screws on the neck plate and the base will slide

off.

- 10 -

www.SCEPTRE.com

SCEPTRE X460 HDTV User Manual

3. Once you have taken off the base, please attach the alternate cover plate (with 4

screw holes) to the opening and tighten the plate with the original screws. Please

save the 2 extra screws in a safe place so that they will not be lost when you want

to re-attach the base.

4. The mounting specification is 600mm x 200mm using screw size M8. The depth

of the mounting holes should not exceed 25mm. Please note : If you are if you are

buying screws, please remember the 25mm depth is just the mounting holes. To

get the total screw length you must still measure the thickness for your mounting

plate and add 25mm in order to get your total screw length.

- 11 -

www.SCEPTRE.com

SCEPTRE X460 HDTV User Manual

Table of Contents

IMPORTANT INFORMATION .......................................................................................................... 2

SAFETY INSTRUCTIONS ................................................................................................................ 3

SAFETY INSTRUCTIONS ................................................................................................................ 4

IMPORTANT INFORMATION .......................................................................................................... 6

Television Antenna Connection Protection ............................................................................ 6

Opening the Package ..................................................................................................................... 7

Package Contents ........................................................................................................................... 7

Installation ....................................................................................................................................... 7

Installing the Stand ................................................................................................................... 8

Removing the Stand ........................................................................................................................ 9

Table of Contents .......................................................................................................................... 11

Identifying Front and Rear Panel ................................................................................................. 12

Front View ................................................................................................................................ 12

Rear View Mounting Pattern .................................................................................................. 12

Side Connection View ............................................................................................................. 13

Side Control Buttons ............................................................................................................... 13

Rear View Connections .......................................................................................................... 14

SCEPTRE X460 Remote Control .................................................................................................. 15

Top Section .............................................................................................................................. 16

Bottom Section ........................................................................................................................ 17

Installing Batteries to the Remote Control ........................................................................... 18

Connection Suggestions .............................................................................................................. 18

If You Have Digital Cable without Cable Box or Antenna… ................................................. 18

Connecting DVD Player with Component YPbPr… .............................................................. 19

Connecting DVD player with S-Video… ................................................................................ 20

Connecting DVD player with Composite… ........................................................................... 21

Connecting Cable or Satellite boxes with HDMI… ............................................................... 22

Connecting to a PC with VGA and 3.5 mm minijack … ........................................................ 22

Connecting a Digital Audio Receiver with Optical SPDIF… ................................................ 23

Ready to Watch Some TV? ........................................................................................................... 24

If You’ve Connected Antenna or Cable to the TV… ............................................................. 24

OSD (On Screen Display) Controls .............................................................................................. 26

Via Remote Control ................................................................................................................. 26

Via TV Side Panel Buttons ...................................................................................................... 26

OSD (On Screen Display) Options ............................................................................................... 27

Video ........................................................................................................................................ 27

AUDIO ...................................................................................................................................... 30

TV ............................................................................................................................................. 31

SETUP ...................................................................................................................................... 32

PARENTAL ............................................................................................................................... 34

Detailed Explanations ................................................................................................................... 37

Aspect Ratio Explained .......................................................................................................... 37

USB Connection Explained .................................................................................................... 38

Closed Captioning (digital and analog) Explained ............................................................... 39

Rating Explained ..................................................................................................................... 39

Shortcuts to Browsing Channels ........................................................................................... 41

Preset Modes Explained ......................................................................................................... 43

How do I clean the TV ? .......................................................................................................... 43

Troubleshooting ............................................................................................................................ 44

Call Us If You Need Help!.............................................................................................................. 47

Specification .................................................................................................................................. 48

LIMITED PRODUCT WARRANTY ................................................................................................. 50

Disclaimer, Trademarks, & Copyright Information .................................................................... 51

FCC Compliance Statement ......................................................................................................... 52

- 12 -

www.SCEPTRE.com

SCEPTRE X460 HDTV User Manual

Identifying Front and Rear Panel

Front View

1. INDICATOR LIGHT – The light is red when power is plugged in but the TV is not turned on. The

light turns blue when the TV is turned on. Because of the size of the panel, the X460 LCD TV will

take 10 – 12 seconds to power on.

2. REMOTE SENSOR – The remote sensor receives all the commands from the remote control.

Rear View Mounting Pattern

Mounting Specification : 600mm x 200mm using screw size M8. Length of screw should not exceed

25mm. Please Note : The 25mm length of screw refers to how deep the screw can go inside the

mounting holes. When you’re buying screws, you should add the original 25mm to the thickness of

your mounting plate in order to get the total screw length.

- 13 -

www.SCEPTRE.com

SCEPTRE X460 HDTV User Manual

Side Connection View

AV (CVBS) – CVBS connects to devices that use composite video cables such as VCR

or camcorder or video game consoles. Please connect the video portion with the yellow

connector. Do NOT connect both yellow and black video connectors. AV shares the

audio red & white connectors with SVIDEO.

SVIDEO – SVIDEO connects to devices such as SVCR or camcorder or video game

consoles. The SVIDEO connection shares audio red & white connectors with AV

(CVBS). Please connect the video portion with the S-Video connector. Do NOT

connect both video connectors.

Side Control Buttons

POWER – Turn on the TV by pressing

the button once. Press the button

again to turn off the TV.

SOURCE – This button switches

between all the different sources of the

TV. When the OSD is active, this

button acts as the enter button and

confirms the menu selection.

MENU – This button activates the On

Screen Display (OSD). If a sub-menu

is active, pressing this button will exit

the OSD.

CH(▲/▼) – These buttons change the

TV channel up or down. If the OSD is

active, these buttons function as up or

down controls for the menu.

VOL(+/-) – These buttons increase or

decrease the TV’s volume. If a sub-

menu is active, pressing these buttons

will move the selection left or right.

- 14 -

www.SCEPTRE.com

SCEPTRE X460 HDTV User Manual

Rear View Connections

The following descriptions are for connections from left to right.

1. USB – This port is used for firmware upgrades and also for browsing pictures or playing

MP3 files if you have a USB flash drive.

2. HDMI1 ~ 4 – HDMI connects to devices that use HDMI cable, such as Blu-ray or HD

DVD player, or HD cable / satellite set-top box. This connection port receives pure

digital audio and high definition signal through one single cable. This port also can

accept a HDCP video device for PC video.

3. VGA - This connection port connects to a PC for video using VGA cable. Be sure to

connect your audio cable to the VGA Stereo input if you want sound out of VGA video

source.

4. VGA STEREO INPUT - This connection port is for people who want to provide audio to

the TV when using a PC or a DVI video device. The sources use 3.5mm mini-jack audio

cable.

5. YPbPr1 – This connection port is for DVD players or satellite / cable set-top boxes that

use component cables. From left to right, connect green, blue, and red for video, and

then connect white for left channel audio, and red for right channel audio.

6. YPbPr2 – This connection port is for DVD players or satellite / cable set-top boxes that

use component cables. From left to right, connect green, blue, and red for video, and

then connect white for left channel audio, and red for right channel audio.

7. SPDIF OUT - This connection port is used for sending out digital audio signals to digital

surround sound receivers. The black (OPTICAL SPDIF OUT) connector cover needs to

be pulled out and the port sends out either bit-stream or PCM digital sound signal to a

home theater receiver with digital input.

8. Headphone – This connection is used for connecting a headphone to the TV.

9. TV – This connection is for digital or analog cable without the cable box or over-the-

airwave antennas. The tuner is a hybrid tuner that tunes to both analog and digital

channels. This connection uses coaxial RF cable. For over-the airwave digital stations

please check http://www.antennaweb.org

.

10. AC IN - This connection is for providing power to the TV.

Please Note:

• This TV features a power saving function which will turn off the TV automatically

after 5 minutes of idling on a connection with no signal. This feature is present on

all connection.

- 15 -

www.SCEPTRE.com

SCEPTRE X460 HDTV User Manual

SCEPTRE X460 Remote Control

This remote control follows SONY’s universal remote code. To find the actual code you need

to consult your cable or satellite tech support.

- 16 -

www.SCEPTRE.com

SCEPTRE X460 HDTV User Manual

Top Section

POWER – This button turns the TV on or off.

Because of the size of the panel, the X460

LCD TV will take 10 – 12 seconds to power

on.

FREEZE – This button freezes the video.

Press the button again to unfreeze the screen.

SLEEP – This button enables the sleep

function where the TV turns itself off after the

designated time.

CC – This button turns on the closed

captioning system of the television. Please

Note : CC only works under the sources TV,

AV1, and AV2.

MTS – This button switches between the

main audio and the (SAP) second audio

programming.

USB – This button enables the USB picture

and MP3 playing function in the TV.

ADD – This button adds a channel to the

favorites list while you are using the TV tuner.

DEL – This button deletes a channel from the

favorites list while you are using the TV tuner.

FAV – This button opens the favorite channel

list.

0-9 – These buttons allow you to access the

channels directly. When accessing a digital

channel you would use these buttons in

junction with the ( – ) button to switch

channels.

( – ) – This button allows you to access digital

channels directly when used in junction with

the number buttons 0-9.

R – This button allows you to jump between

your current channel and the last channel you

were on.

- 17 -

www.SCEPTRE.com

SCEPTRE X460 HDTV User Manual

Bottom Section

PICTURE – This button selects

different optimized picture settings for

the TV.

SOUND – This button selects different

optimized sound settings for the TV.

VOL(+/-) – These two buttons

increase or decrease the volume of

the TV.

CH(+/-) – These two buttons change

the TV channel up or down.

MUTE – This button stops the TV from

producing any sound.

ASPECT – This button changes the

TV between different display modes.

GUIDE – This button turns on the

electronic program guide that is

received from over the airwave

antenna.

MENU – This button turns on the on

screen display menu (OSD).

▲▼◄► – These buttons allow you to

navigate inside the OSD menu. They

also function as CH+/- for digital

channels in the tuner.

↵ – This button allows you to select

functions inside the OSD menu and

also acts as the ENTER button for

changing channels.

SOURCE – This button switches the

input sources. Once pressed use the

▲▼◄► and ↵ key to select the

source you want to switch to.

EXIT – This button allows you to quit

from the OSD menu

Motion Blur Free – This function

enables the 120hz effect.

INFO – This function tells you the

LCD’s current display information.

- 18 -

www.SCEPTRE.com

SCEPTRE X460 HDTV User Manual

Installing Batteries to the Remote Control

Please insert two AAA batteries into the remote control. Make sure that you match the (+) and (-)

symbols on the batteries with the (+) and (-) symbols inside the battery compartment. Afterwards,

re-attach the battery cover.

Please note:

• Only use AAA batteries.

• Do not mix new and old batteries. This may result in cracking or leakage that may pose a fire

risk or lead to personal injury.

• Inserting the batteries incorrectly may also result in cracking or leakage that may pose a fire

risk or lead to personal injury.

• Dispose the batteries in accordance with local laws and regulations.

• Keep the batteries away from children and pets.

• If the remote control is not used for a long time, remove the batteries.

• Keep the remote control away from moisture, sunlight, and high temperatures.

Connection Suggestions

If You Have Digital Cable without Cable Box or Antenna…

1. Make sure the power of X460 LCD HDTV is turned off.

2. Connect the Coaxial RF cable from your antenna or digital cable to the TV port on

the back of your X460 LCD HDTV.

- 19 -

www.SCEPTRE.com

SCEPTRE X460 HDTV User Manual

3. Turn on X460 LCD HDTV.

4. Follow the first time on screen instructions.

Please Note :

• Not all broadcasts are in High Definition (HD). Please refer to your local

broadcasting stations for more information.

• The X460 LCD HDTV’s tuner is designed for HDTV therefore requires a

stronger signal than normal TVs. If you cannot achieve that signal level with

your antenna or cable, your X460 LCD HDTV might lose picture or sound.

Connecting DVD Player with Component YPbPr…

1. Make sure the power of X460 LCD HDTV and your DVD player is turned off.

2. Obtain a Component Cable. Connect the green color connector to both your DVD player

and YPbPr’s green connector port on the back of your X460 LCD HDTV.

3. Connect the blue color connector to both your DVD player and YPbPr’s blue connector

port on the back of your X460 LCD HDTV.

4. Connect the red color connector to both your DVD player and YPbPr’s red connector

port on the back of your X460 LCD HDTV.

5. Obtain a RCA Audio Cable. Connect the white color connector to both your DVD player

and YPbPr’s white connector port on the back of your X460 LCD HDTV.

6. Connect the red color connector to both your DVD player and YPbPr’s red connector

port on the back of your X460 LCD HDTV.

7. Turn on the X460 LCD HDTV and your DVD player.

8. Use the remote control’s source button or the source button on the TV to switch to

YPbPr.

Please Note :

• Please reference the DVD player’s manual as well, to make sure the DVD

player is configured to output correctly to the TV.

- 20 -

www.SCEPTRE.com

SCEPTRE X460 HDTV User Manual

Connecting DVD player with S-Video…

1. Make sure the power of X460 LCD HDTV and your DVD player is turned off.

2. Obtain an S-Video Cable. Connect the S-Video connector to both your DVD player and

AV’s S-Video connector port on the left side of your X460 LCD HDTV.

3. Obtain a RCA Audio Cable. Connect the white color connector to both your DVD player

and AV’s white connector port on the left side of your X460 LCD HDTV.

4. Connect the red color connector to both your DVD player and AV’s red connector port on

the left side of your X460 LCD HDTV.

5. Turn on the X460 LCD HDTV and your DVD player.

6. Use the remote control’s source button or the source button on the TV to switch to S-

Video.

Please Note :

• Make sure the yellow connector in the same group is not connected. You

can only connect either the S-Video port or the Yellow Video connector port.

DO NOT CONNECT BOTH.

• Please reference the DVD player’s manual as well, to make sure the DVD

player is configured to output correctly to the TV.

Page is loading ...

Sceptre X460 User manual

Sceptre X460 User manual

Related papers

Other documents