Rheem Fury 40 User manual
- Category
- Water heaters & boilers
- Type
- User manual
This manual is also suitable for
Rheem Canada announces a
reduction!
For ease of installation and handling…
we’re proud to introduce gas water heaters with some of
the smallest diameters in the industry!
Residential water heaters
from Rheem
Rheem Water Heating
Rheem Canada Ltd./Ltée
128 Barton Street West
Hamilton, Ontario L8N 3P3
www.rheem.com
Rheem Professional and Fury 40 and 50
gallon gas models now feature a reduction
in tank diameter of one and a half inches!
• Same high input of 40,000 BTUs on the Professional
40 gallon natural gas model
• Dual altitude rating of 0-4,500 feet above sea level to
eliminate the need for two versions
• 13% improvement (8 gallon/hour) with first hour delivery
as compared to current 40 gallon model
• Professional models included the 8 year warranty
• Patented Everkleen
™
dip tube included with both models
For more information, contact us at
1-800-268-6966
FURY
PROFESSIONAL
NOW WITH
SMALLER
DIAMETERS!
PROFESSIONAL
™
& FURY GAS WATER HEATERS
now with smaller diameters!
Professional
Upgradeable 6-year limited tank warranty to 8-years, 1-year limited parts warranty*
Upgrade your warranty with ProtectionPlus – 8-year limited warranty becomes 10 years
Fury
6-year limited tank warranty, 1-year limited parts warranty*
*See residential warranty information brochure for complete warranty information.
Guardian System
™
•
One-of-a-kind air/fuel shut-off
device offers double protection
•
Maintenance free – no filter to clean
•
Standard replacement parts
Self-Cleaning
•
EverKleen
™
patented system fights
sediment build-up
•
Reduces fuel costs
•
Provides more hot water
Easy to Light
•
No matches required
•
Piezo pilot ignition
Energy Efficient
•
More hot water at low operating cost
High Altitude Compliant
•
All models are certified for applications up to 4,500 feet
above sea level
Longer Life
•
Patented magnesium anode rod design protects the tank
from rust
Plus…
•
Brass drain valve and temperature and pressure relief valve
are included
•
Meets or exceeds NRCan requirements
Exclusive Professional Installation Warranty
W
hen this Rheem PROFESSIONAL water heater is installed by a licensed contractor, the
consumer can upgrade his limited tank and parts warranty from 6 to 8 years by returning to
Rheem the warranty registration card and a copy of the contractor’s invoice.
This Rheem exclusive warranty upgrade feature enhances your value as a plumbing professional.
A
professional installation is a better installation.
*
Refer to the warranty certificate enclosed with each water heater for specific details.
Features:
®
DESCRIPTION FEATURES ROUGHING IN DIMENSIONS (SHOWN IN INCHES) ENERGY INFO.
HT. TO WATER HT. TO
GAS INPUT IN RECOVERY IN FIRST HOUR HT. TO TANK GAS VENT CONN. SIDE WATER SHIP. ENERGY
T
HOUS. BTU/HR. G.P.H. 100° RISE DEL. G.P.H. VENT HT. DIAM. CONN. SIZE CNTR. T&P CONN. WT. FACTOR
MODEL NUMBER NAT. LP NAT. LP NAT. AB CD EF GH (LBS) NAT.
PRO40-40FV1 40 36 34 30.5 72 54-1/4 50-1/2 20-1/4 14-1/2 3-4* 8 44 3/4 130 .59
PRO50-45FV1 45 40 38.2 34 88 54-3/8 50-1/2 22-1/4 14-1/2 4844 3/4 160 .58
PROFESSIONAL
RR40-36FV1 36 34 30.5 28.8 72 53-1/8 49-3/8 20-1/4 14-1/2 3-4* 8 42-3/4 3/4 130 .59
RR50-40FV1 40 36 34 30.5 84 54-1/4 50-1/2 22-1/4 14-1/2 3-4* 8 44 3/4 160 .58
RR60-51FV 50 50 50.5 50.5 107 62 58 23 13-1/4 4848-1/2 3/4 180 .56
RR75-75FV 75.1 65 75.8 67.7 141 64 60 26-1/4 14-3/4 4 11 53-1/4 1 320 .53†
FURY
SPECIFY LP GAS WHEN ORDERING. Add “P” suffix to the model number and change BTU input. Example: PRO40-36PFV1.
* PRO40-40FV1, RR40-36FV1 and RR50-40FV1 feature a 3-4" combo vent.
• 60 and 75 gallon models meet SCAQMD rule 1121 or SCAQMD rule 1146.2.
• 75 gallon model features side water connections for space heating applications.
† Energy Factor for 75 gallon LP model.
E
G
BA
C
F
H
HOT
WATER
CONNECTION
H
COLD
WATER
CONNECTION
D
1/2"
3/4" N.P.T.
RELIEF
VALVE
OPENING
FLUE
ANODE ROD
These units are designed to meet
or exceed ANSI (American National
Standards Institute) requirements
and have been tested according to
C.S.A. test procedures and meet or
exceed the energy efficiency
requirements of NRCan, ASHRAE
standard 90, and all government
energy efficiency performance cri-
teria for energy consuming appli-
ances.
Before purchasing this appliance,
read important energy cost and
efficiency information available from
your supplier.
Rheem Guardian System Features…
Flame Arrestor Plate
A specially-designed flame
arrestor prevents ignition of
vapours outside the combus-
tion chamber.
Maintenance Free
Superior air filtration prevents
the flame arrestor from becom-
ing clogged by lint, dust and oil.
Exclusive Combustion
Shut-off System
Should a spill incident occur,
the Guardian System shuts off
the gas supply and the air
supply preventing a sustained
vapour burn in the combustion
chamber.
Rheem Manufacturing Company • Water Heater Division
Rheem Canada Ltd./Ltée,128 Barton Street West, Hamilton, Ontario L8N 3P3
0 8 / 0 8 W P F O R M N O . 1 01 - 5 0C A N R ev. 1
In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.
-
1
-
2
Rheem Fury 40 User manual
- Category
- Water heaters & boilers
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Rheem PRO40-40FY1 User manual
-
-
Rheem RE10 User manual
-
-
-
-
-
-
-
