20 GB/IE/NI
take a few minutes and is indicated by the DCF symbol flash-
ing in the info field
7
.
Upon successful reception of the radio signal the DCF symbol
will stop flashing.
The product is now in clock mode and indicates the current
time (CET - Central European Time). It also indicates the date,
weekday in German and the temperature in °C.
Note: If you are located in a time zone other than Central
European Time or wish to display the weekday in another
language, it must be manually set. Please refer to chapter
„Changing basic settings“.
Note: Should you be in a country in which the DCF signal
can be received but the time is different to your current local
time, you can use the time zone setting to have the product
display your current local time. If you find yourself in a coun-
try in which, for example, the local time is an hour ahead of
Central European Time (CET), you set the time zone to +01.
The product is now still controlled by DCF but shows the time
as one hour ahead of CET.
Note: If the product is unable to receive a signal after 7 min-
utes, the DCF symbol will turn off. In this case, possibly
change the location of the product and start reception of the