Edsal BC6200G Operating instructions

Brand: Edsal

Model: BC6200G

Type: Operating instructions

This manual is also suitable for

BC4803G

Bin Cabinets

Should you have any comments, damage, missing parts, or problems with assembly of this unit please feel free to contact our Edsal

manufacturing facility at, (773) 475-3000 and request customer service. We can also be reached on the internet at the following email

address : customerservice@edsal.com.

To obtain replacement parts, please provide the following information :

- Model # - Part # & Description - Location Purchased - Date Purchased

Industrial Products Division

Edsal Manufacturing Company

4400 South Packers Avenue

Chicago, IL 60609

www.edsal.com

Use Caution when handling metal parts. The metal may

have sharp edges or corners. The use of protective

gloves is recommended. This unit should be securely

anchored to a wall with suitable fasteners, and placed on

a level surface. Do not use this unit for anything that is

outside the designed function of storage. DO NOT

OVERLOAD. DO NOT store loose or heavy items on

the top shelves or on the top of the unit, for they create a

falling hazard that can injure yourself or others. DO NOT

stand on or use unit as a ladder. Always remember to

use proper lifting techniques when moving either the

boxed or assembled unit.

Safety Instructions

** See the reversed side for

assembly instructions.

Weld Nut

Leg Leveler

#LL381678

Qty (4)

Assemble (4) leg levelers to the bottom of the

cabinet. Square and level the cabinet. It is

VERY important to have the front of the cabinet

square and level to maintain the cabinet, and the

contents within the cabinet In a balanced safe

state.

Louvered panels are hung from the brackets that

are welded to the cabinet back & doors. Make

sure the louvers are facing upward. Edsal bins can

then be hung from them. Always place the heavi-

est loads toward the bottom. DO NOT OVER-

LOAD or create UNBALANCED LOADS. Bin

boxes should be attached to the cabinet before

attaching them to the doors.

Top Bracket

Bottom Bracket

Louvered Panels

Door Shelves are assembled to the doors with the

flange upward. Use (2) 1/4-20 x 1/2” slotted truss

head bolts and nuts to fasten the shelves. When

loading shelves, always keep the heavier loads

toward the bottom and in a balanced state.

Door

Door Shelf

Door

Assembly

With

Shelf

1/4-20 Nut

#F1420N

Qty (2)

1/4-20x1/2”

Screw

#F14205S

Qty (2)

Assemble the shelves to the louvers that are

welded to the cabinet sides. Make sure the

shelves are flush with the back of the cabinet.

Always be sure to evenly distribute the weight

stored on each shelf. Always keep heavier loads

toward the bottom.

Full Size Shelf

Shelf

Push

Down

Industrial Products Division

Edsal Manufacturing Company

4400 South Packers Avenue

Chicago, IL 60609

www.edsal.com

Use Caution when handling metal parts. The

metal may have sharp edges or corners. The use

of protective gloves is recommended. This unit

should be securely anchored to a wall with suit-

able fasteners, and placed on a level surface. Do

not use this unit for anything that is outside the

designed function of storage. DO NOT OVER-

LOAD. DO NOT store loose or heavy items on

the top shelves or on the top of the unit, for they

create a falling hazard that can injure yourself or

others. DO NOT stand on or use unit as a ladder.

Always remember to use proper lifting techniques

when moving either the boxed or assembled unit.

Safety Instructions

Cabinet Bottom

Assemble hasp to the door with (2) 1/4-20 x 1/2”

carriage bolts and nuts. Assemble (2) handles to

doors with (4) #8-32 x 3/8 bolts.

#8-32 x 3/8”

Bolts

Qty (4)

1/4-20 Nut

#F1420N

Qty (2)

Washers

#F14SW

Qty (2)

1/4-20 x 1/2”

Carriage Bolt

#F14205CB

Qty (2)

Handle

HNDL-PUL

Qty (2)

Hasp

9867

Qty (1)

Bin Cabinets

Should you have any comments, damage, missing parts, or problems with assembly of this unit please feel free to contact our Edsal

manufacturing facility at, (773) 475-3000 and request customer service. We can also be reached on the internet at the following email

address : customerservice@edsal.com.

To obtain replacement parts, please provide the following information :

- Model # - Part # & Description - Location Purchased - Date Purchased

Industrial Products Division

Edsal Manufacturing Company

4400 South Packers Avenue

Chicago, IL 60609

www.edsal.com

Use Caution when handling metal parts. The metal may

have sharp edges or corners. The use of protective

gloves is recommended. This unit should be securely

anchored to a wall with suitable fasteners, and placed on

a level surface. Do not use this unit for anything that is

outside the designed function of storage. DO NOT

OVERLOAD. DO NOT store loose or heavy items on

the top shelves or on the top of the unit, for they create a

falling hazard that can injure yourself or others. DO

NOT stand on or use unit as a ladder. Always remem-

ber to use proper lifting techniques when moving either

the boxed or assembled unit.

Safety Instructions

** See the reversed side for

assembly instructions.

Security Hasp

#9867

1/4-20 x 1/2”

Carriage Bolts

#F14205CB

Qty (2)

Security Hasp

Cover Plate

#9866

1/4-20 Nut

#F1420N

Qty (2)

Washers

#F14SW

Qty (2)

Assemble the security hasp to the inside of the left

hand door by passing the flange with the oval

opening through the slot in the door and securing

with (2) 1/4-20 carriage bolts, (2) washers, and (2)

1/4-20 nuts. Attach the security hasp cover plate,

with cut-out facing down and to the OUTSIDE of

the right hand door using (2) 1/4-20 carriage bolts,

(2) washers, and (2) 1/4-20 nuts.

Weld Nut

Leg Leveler

#LL381678

Qty (4)

Assemble (4) leg levelers to the bottom of the

cabinet. Square and level the cabinet. It is

VERY important to have the front of the cabinet

square and level to maintain the cabinet, and the

contents within the cabinet In a balanced safe

state.

Louvered panels are hung from the brackets that

are welded to the cabinet back & doors. Make

sure the louvers are facing upward. Edsal bins can

then be hung from them. Always place the heavi-

est loads toward the bottom. DO NOT OVER-

LOAD or create UNBALANCED LOADS. Bin

boxes should be attached to the cabinet before

attaching them to the doors.

Top Bracket

Bottom Bracket

Louvered Panels

Door Shelves are assembled to the doors with the

flange upward. Use (2) 1/4-20 x 1/2” slotted truss

head bolts and nuts to fasten the shelves. When

loading shelves, always keep the heavier loads

toward the bottom and in a balanced state.

Door

Door Shelf

Door

Assembly

With

Shelf

1/4-20 Nut

#F1420N

Qty (2)

1/4-20x1/2”

Screw

#F14205S

Qty (2)

Assemble the shelves to the louvers that are

welded to the cabinet sides. Make sure the

shelves are flush with the back of the cabinet.

Always be sure to evenly distribute the weight

stored on each shelf. Always keep heavier loads

toward the bottom.

Full Size Shelf

Shelf

Push

Down

Industrial Products Division

Edsal Manufacturing Company

4400 South Packers Avenue

Chicago, IL 60609

www.edsal.com

Use Caution when handling metal parts. The

metal may have sharp edges or corners. The use

of protective gloves is recommended. This unit

should be securely anchored to a wall with suit-

able fasteners, and placed on a level surface. Do

not use this unit for anything that is outside the

designed function of storage. DO NOT OVER-

LOAD. DO NOT store loose or heavy items on

the top shelves or on the top of the unit, for they

create a falling hazard that can injure yourself or

others. DO NOT stand on or use unit as a ladder.

Always remember to use proper lifting techniques

when moving either the boxed or assembled unit.

Safety Instructions

Cabinet Bottom

1 2

Edsal BC6200G Operating instructions

Brand: Edsal

Model: BC6200G

Type: Operating instructions

This manual is also suitable for

BC4803G

Download PDF

report

Edsal BC6200G Operating instructions

This manual is also suitable for

Edsal BC6200G Operating instructions

Related papers

Other documents