Logik LBFANX14 User manual

Brand: Logik

Model: LBFANX14

Category: Hardware cooling accessories

Type: User manual

This manual is also suitable for

Logik LBFANX14 is a versatile kitchen appliance that combines the functions of an oven, grill, and microwave, offering a wide range of cooking options. Its spacious 25-liter capacity and 900-watt power ensure efficient and even cooking, while the adjustable thermostat allows you to precisely control the temperature for perfect results every time. The Logik LBFANX14 also features a handy grill function for achieving that smoky, charred flavor on your favorite foods.

Logik LBFANX14 is a versatile kitchen appliance that combines the functions of an oven, grill, and microwave, offering a wide range of cooking options. Its spacious 25-liter capacity and 900-watt power ensure efficient and even cooking, while the adjustable thermostat allows you to precisely control the temperature for perfect results every time. The Logik LBFANX14 also features a handy grill function for achieving that smoky, charred flavor on your favorite foods.

BI Oven:

LBMFMX14

LBFANX14

LBFANW14

LBFANB14

SERVICE MANUAL

2

3

Door assembly

Removing the door assembly

1. Lift the lock of the left and right door hinge.

2. Position the door at an angle of 45° relative to the front of the appliance, lift and

pull out toward yourself.

3. Place the door on a at surface with the handle facing downward. Using a at

screwdriver, pry the cap of the prole on one side to remove it.

4

4. Pull out the inner glass panel and carefully lift it. Do the same with the middle

glass panel(s).

Door assembly

5. Remove the screw that fastens the hinge to the inner glass prole. Pull the hinge

out of the prole.

6. Use the screwdriver to pry and remove the glass panel bracket.

Refer to the Annex to the SBI_001 service manual.

5

Door assembly

7. Remove the door handle by undoing the screws.

8. To reassemble the components follow the above steps in reverse order.

6

Front panel

Remove the front panel

1. Remove the front panel top cover and lift it up. On both sides undo the screws

that fasten the front panel to the body of the appliance.

7

Convection fan assembly

1. Remove the rear wall according to relevant instructions in the manual. Remove

the fan guard by removing the screws. Remove the fan propeller by holding the

fastening nut with the pliers and rotating propeller.

Remove the fan

3. To reassemble the components follow the above steps in reverse order.

2. Remove the fan drive by bending the locking tab. Then turn counter-clockwise

and pull the fan drive toward you. Disconnect the fan drive wiring harness.

8

Temperature sensor

1. Remove the rear wall according to relevant instructions in the manual. Remove

the screw securing the temperature sensor. Remove the temperature sensor em-

bedded in the socket. Disconnect the temperature sensor wiring harness.

Remove the temperature probe

2. To reassemble the components follow the above steps in reverse order.

9

Heating elements

1. Remove the rear wall according to relevant instructions in the manual. Discon-

nect the wiring harness of the top heater. Remove the nuts securing the heater to

the oven chamber. After unscrewing, remove the heater from the oven chamber.

Remove the top heating element

2. To reassemble the components follow the above steps in reverse order.

10

Heating elements

1. Remove the rear wall and the fan guard according to relevant instructions in the

manual. Disconnect the wiring harness from the convection fan heater. Using a

socket head wrench undo and remove the nut securing the heater assembly.

Remove the convection heater

3. To reassemble the components follow the above steps in reverse order.

2. Inside the oven chamber, remove the screw securing the heater and pull the

heater toward yourself.

11

Heating elements

1. Remove the rear guard according to relevant instructions in the manual. Discon-

nect the wiring harness from the bottom the heater. Move the oven chamber insu-

lation out of the way to allow access to the heater mounting. Deect the catches

securing the heater.

Remove the bottom heater

12

Front wall

1. Remove the door assembly, side walls and front panel according to relevant in-

structions in the manual. To replace the front wall it is not necessary to remove

the oven insulation. Undo the screws securing the front wall to the oven cham-

ber.

Remove the front wall

2. To reassemble the components follow the above steps in reverse order.

13

Oven door seal

1. Unhook the seal holders after removing the front wall according to relevant in-

structions in the manual.

Remove the oven door seal

2. To reassemble the components follow the above steps in reverse order.

14

Oven chamber insulation

1. Remove the top cover, side walls, bottom cover and fan guard according to rel-

evant instructions in the manual. Remove the rear insulation cover (previously

disconnecting all wire harnesses) by removing the two screws.

Replace the oven insulation

3. To reassemble the components follow the above steps in reverse order.

2. Replace the oven insulation

15

IS-002.1_EN

(05.2014)

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16

Logik LBFANX14 User manual

Brand: Logik

Model: LBFANX14

Category: Hardware cooling accessories

Type: User manual

This manual is also suitable for

Logik LBFANX14 is a versatile kitchen appliance that combines the functions of an oven, grill, and microwave, offering a wide range of cooking options. Its spacious 25-liter capacity and 900-watt power ensure efficient and even cooking, while the adjustable thermostat allows you to precisely control the temperature for perfect results every time. The Logik LBFANX14 also features a handy grill function for achieving that smoky, charred flavor on your favorite foods.

Download PDF

Other documents