Newstar FPMA-W75 User manual

Newstar
Brand
Newstar
Model
FPMA-W75
Category
Flat panel wall mounts
Type
User manual
1
2
Secure wall mount plate firmly to
the solid wall with four expansion
screws (not supplied ).
4- 6.5E
Check your panel first to
which VESA standard
interface it supports before
assembling.
Secure the arm to the rear of
the LCD panel with 4 screws.
Secure 100mmx100mm plate
to the arm with screws, then
secure the arm to the rear or
the LCD panel with screws.
75mmx75mm VESA
standard interface
100mmx100mm VESA
standard interface
Insert the arm
(with LCD
monitor on
already) into
the wall mount
plate and press
it down.
Secure the nut to
the screw about 3-
5 circles (as figure).
Clockwise
direction locks it
into wall mount
plate. Then secure
the nut
counterclockwise
to the wall mount
plate (avoiding the
arm falls off).
When the joint
loosens
,tighten the
parallel knob
up with
clockwise
direction.
Loading weight :
1 ~ 6 kgs.
Supportthemonit orduringtheadjustmentprocedure.
Note:
Unit:mm
NewStar user's Manual
LCD Monitor Arm FPMA-W75
www.NewStar.nl
Phone:+31(0)235478888
160
0
91.5
90
80
90
75
25
0
10
0
4- 6.5E
75
90
115
100
Assembly guide
X9
X1
Check-list
Arm operation
5
1
2
3
4
Wall Mount Kit
FPMA-W75
2004.02.20
  • Page 1 1

Newstar FPMA-W75 User manual

Newstar
Brand
Newstar
Model
FPMA-W75
Category
Flat panel wall mounts
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents