Zurn Z5730 Installation guide

Zurn
Brand
Zurn
Model
Z5730
Type
Installation guide

Zurn Z5730 is a 0.5-1.0 gpf top spud siphon jet urinal that is made of vitreous china and has a 4 1/8” back outlet rough-in, 3/4” top spud, 2” I.P.S. outlet flange and rubber gasket with integral trap. It is recommended to use this product with a WaterSense labeled counterpart with a compatible flush volume to ensure that the entire system meets the requirements for water efficiency and performance. The fixture dimensions meet ANSI/ASME standard A112.19.2 and CAN/CSA B45 requirements and it meets the American Disabilities Guidelines and ANSI A117.

Zurn Z5730 is a 0.5-1.0 gpf top spud siphon jet urinal that is made of vitreous china and has a 4 1/8” back outlet rough-in, 3/4” top spud, 2” I.P.S. outlet flange and rubber gasket with integral trap. It is recommended to use this product with a WaterSense labeled counterpart with a compatible flush volume to ensure that the entire system meets the requirements for water efficiency and performance. The fixture dimensions meet ANSI/ASME standard A112.19.2 and CAN/CSA B45 requirements and it meets the American Disabilities Guidelines and ANSI A117.

Z5730
0.5-1.0 gpf Top Spud Siphon Jet Urinal
TAG
Rev. H Date: 4/18/2017
Dwg. No. 80611 Product No. Z5730
AquaVantage
®
is a registered trademark of Zurn Industries, LLC.
ZURN INDUSTRIES, LLC.
♦
COMMERCIAL BRASS OPERATION
5900 ELWIN BUCHANAN DRIVE
♦
SANFORD NC 27330
PHONE: 1-800-997-3876
♦
FAX: 919-775-3541
WWW.ZURN.COM
IN CANADA: ZURN INDUSTRIES LIMITED
7900 GOREWAY DRIVE UNIT 10
♦
BRAMPTON, ONTARIO L6T5W6
PHONE: 905-405-8272 FAX: 905-405-1292
These dimensions and specifications are subject to change without
notice.
Fixture dimensions meet ANSI/ASME standard A112.19.2 and CAN/
CSA B45 requirements.
Z5730 Series
See Zurn One Systems for suggested packages.
Engineering Specification:
Z5730 with Top Spud
Vitreous china, 0.5-1.0 gpf [1.9-3.8 Lpf] siphon
jet urinal with 3/4” top spud and concealed wall
hanger bracket.
Recommended Trim:
Z6003AV-EWS* AquaVantage
®
AV 0.5 gpf low
consumption exposed urinal flush valve.
Z6003AV-WS1 AquaVantage
®
AV 1.0 gpf low
consumption exposed urinal flush valve.
ZTR6203-EWS-LL*
Sensor Long Life Battery Operated Urinal
Flush Valve 0.5 gpf [1.9Lpf].
ZTR6203-WS1-LL
Sensor Long Life Battery Operated Urinal
Flush Valve 1.0 gpf [3.8Lpf].
Z5730 Series
• 0.5-1.0 gpf (gallons per flush)
• Vitreous china
• Siphon Jet Action
• 4 1/8” Back Outlet Rough-in
• 3/4” top spud
• 2” I.P.S. outlet flange and rubber gasket with integral trap
• Shipping Weight: 39 lbs.
The information contained in this document is subject to change without notice.
Please contact Zurn for most up to date information.
This space is for Architectural/engineering Approval
*
This product should be used with a
WaterSense labeled counterpart with a
compatible flush volume to ensure that the
entire system meets the requirements for
water efficiency and performance.
Z5730
0.5-1.0 gpf Top Spud Siphon Jet Urinal
TAG
Rev. H Date: 4/18/2017
Dwg. No. 80611 Product No. Z5730
AquaVantage
®
is a registered trademark of Zurn Industries, LLC.
ZURN INDUSTRIES, LLC.
♦
COMMERCIAL BRASS OPERATION
5900 ELWIN BUCHANAN DRIVE
♦
SANFORD NC 27330
PHONE: 1-800-997-3876
♦
FAX: 919-775-3541
WWW.ZURN.COM
IN CANADA: ZURN INDUSTRIES LIMITED
7900 GOREWAY DRIVE UNIT 10
♦
BRAMPTON, ONTARIO L6T5W6
PHONE: 905-405-8272 FAX: 905-405-1292
Rough-in dimensions for Z5730 Series
C.L. OUTLET
FINISHED
WALL
FINISHED FLOOR
1
2
[13]
11
16
[17]
1 [25]
2X SCALE
CLIP
SPUD
3
4
[19]
24 [610]
(17 [432] ADA)
14 [355]
15
1
2
[393]
(C.L. OF
OUTLET)
2 [51]
22
1
4
[565]
7 [178]
1
1
2
[38]
2
1
4
[57]
14
1
2
[368]
3
3
4
[95]
32 [813]
16
1
2
[419]
8
1
2
[216]
4
3
4
[121]
11
1
2
[292]
5
1
2
[140]
NOTE: Rough-in for concealed plate carrier, see Zurn Z1222 Rough-in
sheet.
Fixture dimensions meet ANSI/ASME standards
A112.19.2 and CAN/CSA B45 requirements.
Meets the American Disabilities Guidelines and ANSI
A117.1 requirements when urinal is installed 17"
[432 mm] from finished floor.
These dimensions and specifications are subject to
change without notice.
  • Page 1 1
  • Page 2 2

Zurn Z5730 Installation guide

Zurn
Brand
Zurn
Model
Z5730
Type
Installation guide

Zurn Z5730 is a 0.5-1.0 gpf top spud siphon jet urinal that is made of vitreous china and has a 4 1/8” back outlet rough-in, 3/4” top spud, 2” I.P.S. outlet flange and rubber gasket with integral trap. It is recommended to use this product with a WaterSense labeled counterpart with a compatible flush volume to ensure that the entire system meets the requirements for water efficiency and performance. The fixture dimensions meet ANSI/ASME standard A112.19.2 and CAN/CSA B45 requirements and it meets the American Disabilities Guidelines and ANSI A117.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents