Design House 524538 User manual

Category
Sanitary ware
Type
User manual

Design House 524538 is a two-handle lavatory faucet that provides reliable performance and a stylish addition to your bathroom. Its durable construction ensures years of trouble-free use. Installation is simple with the included mounting nuts and gaskets, and the faucet features a sleek design that complements various bathroom styles. The faucet's handles allow for precise control over water flow and temperature, making it easy to find the perfect setting for your needs.

Design House 524538 is a two-handle lavatory faucet that provides reliable performance and a stylish addition to your bathroom. Its durable construction ensures years of trouble-free use. Installation is simple with the included mounting nuts and gaskets, and the faucet features a sleek design that complements various bathroom styles. The faucet's handles allow for precise control over water flow and temperature, making it easy to find the perfect setting for your needs.

ALWAYS protect your eyes with safety glasses.
SAFETY TIPS
IMPORTANT POINTS
Helpful tools to install this faucet:
basin wrench
Teflon tape
(2) crescent wrenches
silicon sealer
flashlight
faucet supply tubes
Models 524512, 524538
TWO HANDLE
LAVATORY FAUCET
Design House is a registered
brand of DHI Corp.
Mequon, WI 53092
1-800-558-8700
Your new Design House faucet will give you years of trouble free performance.
Thank you for choosing a Design House product for your home.
Please read all of these instructions carefully before installing your new faucet.
When installing your new faucet, hand tighten the connector nuts, then use one wrench to anchor
the fitting and a second wrench to tighten the nut one additional turn. Connections that are too tight
will reduce the integrity of the system.
Wrap all threaded connections (except aerator thread in spout) with Teflon tape available from your
local hardware or plumbing supply store. Always wrap in a counter-clockwise direction.
MAINTENANCE
INSTALLATION PROCEDURE
Under the Safe Drinking Water Act, the U.S. Environmental Protection Agency restricts the
amount of lead used in brass and solder. Your new faucet is made in strict compliance with
all government standards. The materials used in the manufacture of this faucet are of industry
standard quality and are similar to other plumbing products having brass fittings.
To reduce the amount of lead in your drinking water, allow the water to run for a moment before
filling your glass and remember to always use cold water for drinking purposes.
CONSUMER PROTECTION WARNING
Your new Design House faucet is designed to give you years of trouble free performance. Keep it
looking new by cleaning it periodically with a soft cloth. Avoid abrasive cleaners, steel wool and harsh
chemicals that will dull the finish and void your warranty.
Brass finishes are polished, then protected with a lacquer coating to help prevent tarnishing. Clean
these surfaces only with a damp, soft cloth.
1. Shut off water supplies.
Remove old faucet.
Place gasket (1A) on bottom
of new faucet.
Place faucet though mounting
holes in sink. Secure faucet to
sink using mounting nuts (1B)
provided.
2. Make connections to water
lines.
Use 1/2" IPS faucet
connections (2A) or use the
supplied coupling nuts (2C)
with 3/8"O.D.ball-nose risers
(2B).
Use wrenches to tighten
connections.
Do not overtighten.
3. Important: After installation is
completed, remove aerator.
Turn on water supply and
allow both hot and cold water
to run for at least one minute
each.
While water is running, check
for leaks.
Replace aerator.
1 2 3
2A
2B
2C
1A
1B
POP-UP (OPTIONAL) INSTALLATION PROCEDURE
TROUBLE SHOOTING
POP-UP INSTALLATION
EXPLODED PARTS
Problem: Faucet leaks from under handle.
Cause: Bonnet is loose or o-ring on cartridge is
dirty or twisted.
Action:
1. Move handle to OFF position. Unscrew the set
screw on the side of the handle seat.
Then remove the entire handle assembly.
2. Tighten the bonnet by turning it clockwise.
Move the cartridge stem to the ON position.
The leak should stop around the cartridge
stem.
3. If the leak does not stop, shut off the water
supply.
Remove the bonnet by turning it counter
clockwise.
Lift out the cartridge valve. Inspect the o-rings.
Clear debris, untwist, or replace if necessary.
4. Replace the cartridge making sure the wings
fit well into the cuts in the faucet body.
Tightly screw the bonnet onto the faucet body.
5. Reinstall the handle.
Problem: Faucet leaks around aerator or an
improper flow pattern.
Cause: Aerator is incorrectly fitted or is dirty.
Action:
1. Unscrew the aerator. Make sure all internal
parts are laying flat.
2. If there is debris, gently flush all parts inside.
3. Reinstall aerator.
Many of these parts come preassembled.
This exploded diagram is to assist in trouble
shooting.
1. Remove stopper (1) and flange (2).
Screw nut (3) all the way down.
Push washer (4) and gasket (5) down.
Remove tailpiece (6) from body (7), add Teflon tape,
replace tailpiece.
2. Apply a small bead of Plumber's putty to underside
of flange (1).
Insert body (2) into sink.
Screw flange (1) into body (2).
Pivot (3) must face faucet.
Pull assembly down firmly and hold in place.
DO NOT TWIST.
Tighten nut, washer & gasket (4), clean off excess
Plumber's putty.
3. Remove pivot nut (1).
Install horizontal rod (2) and stopper (3)
as removable (4) or non-removable (5).
Hand tighten pivot nut (1).
4. Attach horizontal rod (1) to strap (2)
using clip (3).
Insert lift rod (4) into strap and tighten
screw (5).
21
3 4
Set Scew
Connect
Inverter
Bonnet
Cartridge
Washer
Mounting Nut
Base Plate
Stopper
Flange
Washer
Gasket
Nut
Washer
Body
Pivot Rod
& Ball
Pivot nut
Washer
Clip
Strap
Screw
Handle
  • Page 1 1
  • Page 2 2

Design House 524538 User manual

Category
Sanitary ware
Type
User manual

Design House 524538 is a two-handle lavatory faucet that provides reliable performance and a stylish addition to your bathroom. Its durable construction ensures years of trouble-free use. Installation is simple with the included mounting nuts and gaskets, and the faucet features a sleek design that complements various bathroom styles. The faucet's handles allow for precise control over water flow and temperature, making it easy to find the perfect setting for your needs.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI