Star Manufacturing SWB8RBDE Operating instructions

1

WAFFLE

BAKERS

MODEL

SWCBE

SWB7R1E

SWB7R2E

SWB7RBE

SWB8SQE

SWB8RBLE

SWB8RBDE

Installation and

Operation

Instructions

2M-Z7728 Rev. F 4/7/2010

SWB7R2E

2

These symbols are intended to alert the user to the presence of

important operating and maintenance instructions in the manual

accompanying the appliance.

RETAIN THIS MANUAL FOR FUTURE REFERENCE

NOTICE

Using any part other than genuine Star factory supplied parts relieves the

manufacturer of all liability.

Star reserves the right to change speciﬁ cations and product design without

notice. Such revisions do not entitle the buyer to corresponding changes,

improvements, additions or replacements for previously purchased

equipment.

Due to periodic changes in designs, methods, procedures, policies and

regulations, the speciﬁ cations contained in this sheet are subject to change

without notice. While Star Manufacturing exercises good faith efforts to provide

information that is accurate, we are not responsible for errors or omissions

in information provided or conclusions reached as a result of using the

speciﬁ cations. By using the information provided, the user assumes all risks in

connection with such use.

MAINTENANCE AND REPAIRS

Contact your local authorized service agent for service or required maintenance. Please record the model

number, serial number, voltage and purchase date in the area below and have it ready when you call to

ensure faster service.

SAFETY SYMBOL

Model No.

Serial No.

Voltage

Purchase Date

Business 8:00 am to 4:30 p.m. Central Standard Time

Hours:

Telephone: (800) 807-9054 Local (314) 781-2777

Fax: (800) 396-2677 Local (314) 781-2714

E-mail [email protected]

[email protected]

Website: www.star-mfg.com

The Star Service Help Desk

Authorized Service Agent

Reference the listing provided with the unit

or

for an updated listing go to:

Website: www.star-mfg.com

E-mail [email protected]

Telephone: (800) 807-9054 Local (314) 781-2777

Mailing Address: Star Manufacturing International Inc.

10 Sunnen Drive

St. Louis, MO 63143

U.S.A

3

SPECIFICATIONS:

SWCBE

Type: Wafe Cone Baker

120V, 1,320 watts, 11 amp, NEMA 5-15P 208V, 990 watts, 4.8 amp, NEMA 6-15P

240V, 1,320 watts, 5.5 amp, NEMA 6-15P 230V 1,210 watts, 5.25 amp, CEE7-7

Approximate weight: installed - 29 Lb s (13 kg), shipping - 32 Lbs (14.5 kg)

Dimensions: 10" - Width, 18 1/4" - Depth, 25 1/2" (Open) 12 1/2" (Closed) - Height

(25.4 cm - Width, 46.3 cm - Depth, 64.7 cm (Open) 31.7cm (Closed) - Height)

SWB7R1E

Type: Standard Wafe Baker

120V, 900 watts, 7.5 amp, NEMA 5-15P 208V, 676 watts, 3.25 amp, NEMA 6-15P

240V, 900 watts, 3.75 amp, NEMA 6-15P 230V 825 watts, 3.5 amp, CEE7-7

Approximate weight: installed - 20 Lb s (9 kg), shipping - 23 Lbs (10.5 kg)

Dimensions: 10" - Width, 15 3/4" - Depth, 22" (Open) 9 1/2" (Closed) - Height

(25.4 cm - Width, 40 cm - Depth, 55.9 cm (Open) 24.1 cm (Closed) - Height)

SWB7R2E

Type: Standard Wafe Baker

120V, 1,800 watts, 15 amp, NEMA 5-15P 208V, 1,352 watts, 6.5 amp, NEMA 6-15P

240V, 1,800 watts, 7.5 amp, NEMA 6-15P 230V 1,650 watts, 7.2 amp, CEE7-7

Approximate weight: installed - 37 Lb s (17 kg), shipping - 41 Lbs (18.7 kg)

Dimensions: 20" - Width, 15 3/4" - Depth, 22" (Open) 9 1/2" (Closed) - Height

(50.8 cm - Width, 40 cm - Depth, 55.9 cm (Open) 24.1 cm (Closed) - Height)

SWB8SQE

Type: Standard Wafe Baker

120V, 1,645 watts, 13.7 amp, NEMA 5-15P 208V, 1,235 watts, 6.0 amp, NEMA 6-15P

240V, 1,645 watts, 6.8 amp, NEMA 6-15P 230V 1,510 watts, 6.6 amp, CEE7-7

Approximate weight: installed - 33 Lb s (15 kg), shipping - 36 Lbs (16.5 kg)

Dimensions: 10" - Width, 18 1/4" - Depth, 27" (Open) 12 1/2" (Closed) - Height

(25.4 cm - Width, 46.3 cm - Depth, 68.6 cm (Open) 31.7 cm (Closed) - Height)

SWB7RBE

Type: Belgian Wafe Baker

120V, 1,000 watts, 8.3 amp, NEMA 5-15P 208V, 751 watts, 3.6 amp, NEMA 6-15P

240V, 1,000 watts, 4.2 amp, NEMA 6-15P 230V 920 watts, 4.0 amp, CEE7-7

Approximate weight: installed - 25 Lb s (11 kg), shipping - 28 Lbs (13 kg)

Dimensions: 10" - Width, 18 1/4" - Depth, 25 1/2" (Open) 14" (Closed) - Height

(25.4 cm - Width, 46.3 cm - Depth, 64.7 cm (Open) 35.5 cm (Closed) - Height)

SWB8RBE

Type: Belgian Wafe Baker

120V, 1,320 watts, 11 amp, NEMA 5-15P 208V, 990 watts, 4.8 amp, NEMA 6-15P

240V, 1,320 watts, 4.8 amp, NEMA 6-15P 230V 1,210 watts, 5.3 amp, CEE7-7

Approximate weight: installed - 28 Lb s (12.7 kg), shipping - 31 Lbs (14 kg)

Dimensions: 10" - Width, 18 1/4" - Depth, 26 1/2" (Open) 14" (Closed) - Height

(25.4 cm - Width, 46.3 cm - Depth, 67.3 cm (Open) 35.5 cm (Closed) - Height)

SWB8RDE

Type: Belgian Wafe Baker

120V, 1,320 watts, 11 amp, NEMA 5-15P 208V, 990 watts, 4.8 amp, NEMA 6-15P

240V, 1,320 watts, 4.8 amp, NEMA 6-15P 230V 1,210 watts, 5.3 amp, CEE7-7

Approximate weight: installed - 28 Lb s (12.7 kg), shipping - 31 Lbs (14 kg)

Dimensions: 10" - Width, 18 1/4" - Depth, 26 1/2" (Open) 14" (Closed) - Height

(25.4 cm - Width, 46.3 cm - Depth, 67.3 cm (Open) 35.5 cm (Closed) - Height)

4

CAUTION

This equipment is designed and sold for commercial use only by personnel trained and experienced

in its operation and is not sold for consumer use in and around the home nor for use directly by

the general public in food service locations.

INSTALLATION

For your protection, we recommend that a qualied electrician install this appliance. The

electrician should be familiar with electrical installations and your local electrical requirements.

Proper connections and power supply are essential for efcient performance. The supply circuit

should be properly fused as required by electrical code. Plug the unit into a proper A.C. voltage

wall outlet only. A three-prong plug is provided with the unit. If an adapter is used be sure a

good ground is provided.

LOAD

The rated load is on the nameplate. The line in the wall outlet must be heavy enough to carry

this load, or the wafe baker will be slow in performance.

CAUTION

DO NOT CONNECT TO DIRECT CURRENT (DC).

TEFLON

®

COATED WAFFLE BAKERS

CAUTION

DO NOT USE METAL UTENSILS TO REMOVE WAFFLE FROM THE TEFLON

®

COATED

WAFFLE BAKER. THIS WILL VOID THE WARRANTY.

CAUTION

DO NOT CLEAN TEFLON

®

GRIDS WITH ABRASIVES. THIS WILL VOID THE

WARRANTY.

CORD, PLUG AND GROUND INSTRUCTIONS

For your protection, this appliance is equipped with a 3-conductor load cord, having a grounding

type plug. It should only be used with a properly grounded 3-prong receptacle. Do not modify.

If you use an adapter be sure your system is grounded. Connect the green wire to a mounting

screw of the receptacle. For ungrounded electrical systems, connect the green wire of the adapter

to a known permanent ground.

RELEASE AGENT CAUTION

If you nd it necessary to use a release agent to keep wafes from sticking, you should brush it

on. Spraying may oversaturate the grids and the excess has the possibility of building up inside

the baker and causing damage. If you only have a spray type release agent, try spraying it into

a container and using the contents with a pastry brush.

SEASONING WAFFLE GRIDS

(Not applicable to Teon

®

coated grids)

With a pastry brush, apply vegetable oil, butter, or grid release agent on both grids. Turn power

on and allow to preheat for twenty minutes. Lift the lid and re-apply vegetable oil, or grid release

agent. Allow the unit to heat for ve more minutes. The baker is now ready for use.

CAUTION

GRIDS AND CUPS HAVE VERY HIGH TEMPERATURES. DO NOT COME IN DIRECT

CONTACT WITH THESE PARTS WHEN THE WAFFLE BAKER IS IN OPERATION.

DO NOT ALLOW THE CORD TO COME INTO CONTACT WITH HOT GRIDS.

5

MAKING WAFFLES

Turn the unit on and allow to pre-heat for 15 minutes with the grids closed. Once the baker has

reached proper temperature you can proceed as follows:

1. Brush on releasing agent, if needed

2. Lift the lid, pour in mix and close. (Belgian units wait 10 seconds)

3. Start timer by pressing the start/stop pad.

4. Rotate grids 180

o

. (Belgian units only)

5. When timer beeps, depress the start/ stop pad.

6. Rotate grids 180

o

(Belgian units only)

7. Remove wafe. (Do not use metal utensils on teon coated wafe bakers.)

8. For next wafe repeat steps 1 through 7.

Setting the Time:

If necessary, the factory pre-set timer can be adjusted to satisfy individual preferences.

To increase time, depress and hold the "up" button.

The start/ stop button can now be used to increase baking time.

To decrease time, depress and hold the “down” button.

The “start/stop” button can now be used to decrease baking time.

SETTING THE TEMPERATURE

If necessary, the factory pre-set temperature can be changed: To view the temperature, depress

and hold “TEMP” button and press “START/STOP” button. Hold both buttons for 3 seconds for

the pre-set temperature to be displayed.

To increase the temperature press “+” button; to decrease press “-“ button.

To lock the temperature press the “START/STOP” button.

Changing the displayed temperature from “F” (Fahrenheit) to “C” (Celsius) -

Hold “TEMP” button and turn “OFF” and then “ON” the lighted switch on the front panel. To

change back from “C” to “F”, repeat the same procedure. Setting the temperature is available

in both modes “F” and “C”.

HELPFUL HINTS

1. During long slack periods of the day, turn off the baker. During short slack periods, leave

unit on with the grids closed. This will help minimize carbon buildup.

2. Do not store batter in the refrigerator and expect the same speed in baking. Cold batter

will take longer to bake.

3. For proper release of wafes it is important that the batter contain the proper amount of

shortening.

6

CLEANING

For non-coated grids: Clean outside of baker every day that it is in use. Do not clean grids unless

a buildup of carbon forms. In order to remove carbon from grids, unplug the unit, place ammonia

soaked cloth over bottom grid, close and leave overnight. A nylon brush may then be used to

remove the carbon buildup. If you use a commercial carbon remover, make sure that it is safe

for aluminum.

Note: If carbon buildup on the grids is removed, they will need to be reseasoned. See

"Seasoning Wafe Grids"

CAUTION

DO NOT CLEAN USING A WATER JET OR SIMILAR DEVICE FOR CLEANING. DO NOT

IMMERSE IN WATER AT ANY TIME.

CAUTION

DO NOT CLEAN TEFLON

®

GRIDS WITH ABRASIVES. THIS WILL VOID THE WARRANTY.

For cleaning the baker outside use only a soft cloth and mild soap to keep the exterior surfaces

bright and shining. Do not use detergents, strong abrasives or metal scouring pads on the exterior

surfaces of the wafe baker.

7

Part# 2M-4497-2 05/06 RB

The foregoing warranty is in lieu of any and all other warranties expressed or implied and constitutes the entire warranty.

FOR ASSISTANCE

Should you need any assistance regarding the Operation or Maintenance of any Star equipment; write, phone, fax or email our Service Department.

In all correspondence mention the Model number and the Serial number of your unit, and the voltage or type of gas you are using.

ALL:

* Pop-Up Toasters

* Butter Dispensers

* Pretzel Merchandisers

* Pastry Display Cabinets

* Nacho Chip Merchandisers

* Accessories of any kind

* Sneeze Guards

* Pizza Ovens

* Heat Lamps

* Pumps

Visit our Website at:

www.star-mfg.com Email: service@star-mfg.com

THOROUGHLY INSPECT YOUR UNIT ON ARRIVAL

This unit has been tested for proper operation before leaving our plant to insure delivery of your unit in perfect condition. However, there are instances in

which the unit may be damaged in transit. In the event you discover any type of damage to your product upon receipt, you must immediately contact the

transportation company who delivered the item to you and initiate your claim with same. If this procedure is not followed, it may affect the warranty

status of the unit.

LIMITED EQUIPMENT WARRANTY

All workmanship and material in Star products have a one (1) year limited warranty on parts & labor in the United States and Canada. Such warranty is

limited to the original purchaser only and shall be effective from the date the equipment is placed in service. Star's obligation under this warranty is limited

to the repair of defects without charge, by the factory authorized service agency or one of its sub-agencies. Models that are considered portable (see below)

should be taken to the closest Star service agency, transportation prepaid.

> Star will not assume any responsibility for loss of revenue.

> On all shipments outside the United States and Canada, see International Warranty.

* The warranty period for the JetStar six (6) ounce & Super JetStar eight (8) ounce series popcorn machines is two (2) years.

* The warranty period for the Chrome-Max Griddles is five (5) years on the griddle surface. See detailed warranty provided with unit.

* The warranty period for Teflon/Dura-Tec coatings is one year under normal use and reasonable care. This warranty does not apply if damage occurs to

Teflon/Dura-Tec coatings from improper cleaning, maintenance, use of metallic utensils, or abrasive cleaners. This warranty does not apply to the

“non-stick” properties of such materials.

> This warranty does not apply to "Special Products" but to regular catalog items only. Star's warranty on "Special Products" is six (6) months on parts

and ninety (90) days on labor.

> This warranty does not apply to any item that is disassembled or tampered with for any purpose other than repair by a Star Authorized Service Center or

the Service Center's sub-agency.

> This warranty does not apply if damage occurs from improper installation, misuse, wrong voltage, wrong gas or operated contrary to the Installation and

Operating instructions.

> This warranty is not valid on Conveyor Ovens unless a "start-up/check-out" has been performed by a Factory Authorized Technician.

PARTS WARRANTY

Parts that are sold to repair out of warranty equipment are warranted for ninety (90) days. The part only is warranted. Labor to replace the part is

chargeable to the customer.

SERVICES NOT COVERED BY WARRANTY

PORTABLE EQUIPMENT

Star will not honor service bills that include travel time and mileage charges for servicing any products considered "Portable" including items listed below.

These products should be taken to the Service Agency for repair:

1. Travel time and mileage rendered beyond the 50 mile radius limit

2. Mileage and travel time on portable equipment (see below)

3. Labor to replace such items that can be replaced easily during a daily cleaning

routine, ie; removable kettles on fryers, knobs, grease drawers on griddles, etc.

4. Installation of equipment

5. Damages due to improper installation

6. Damages from abuse or misuse

7. Operated contrary to the Operating and Installation Instructions

8. Cleaning of equipment

9. Seasoning of griddle plates

10. Voltage conversions

11. Gas conversions

12. Pilot light adjustment

13. Miscellaneous adjustments

14. Thermostat calibration and by-pass adjustment

15. Resetting of circuit breakers or safety controls or reset buttons

16. Replacement of bulbs

17. Replacement of fuses

18. Repair of damage created during transit, delivery, &

installation OR created by acts of God

* The Model 510FD Fryer.

* The Model J4R, 4 oz. Popcorn Machine.

* The Model 518CMA & 526CMA Cheese Melter.

* The Model 12MC & 15MC & 18MCP Hot Food Merchandisers.

* The Model 12NCPW & 15NCPW Nacho Chip/Popcorn Warmer.

* All Hot Dog Equipment except Roller Grills & Drawer Bun Warmers.

* All Nacho Cheese Warmers except Model 11WLA Series Nacho Cheese Warmer.

* All Condiment Dispensers except the Model HPDE, & SPDE Series Dispenser.

* All Specialty Food Warmers except Model 130R, 11RW Series, and 11WSA Series.

* All QCS/RCS Series Toasters except Model QCS3 & RCS3 Series.

8

AC IN

+

-

SENSOR

C

TIME/TEMP COTROLLER

BOTTOM

ELEMENT

SWITCH

C

E

TRANSFORMER

RTD PROBE

A

C

B

D

TOP ELEMENT

G

J

WIRE ASSEMBLY

CORD ASSY

240V 7.5A

120V 15A

GREEN

GROUND

D

E

F

G

E

C

D

B

A

ELEMENT

C

TRANSFORMER

SWITCH

RELAY

TERMINAL BLOCK

GROUND

ELEMENT

D

230CE

ELECTRICAL SCHEMATIC

TIME/TEMP CONTROLLER

F

J

I

F

RELAY

RTD PROBE

*

WIRING DIAGRAM SWB7RBE/SWB8RBLE

SK1611

FUSE (2)

SEE NOTE 1

NOTES:

1. USE FUSES ON 230V CE

MODELS ONLY.

REV. F 3/29/2005

A

D

(BACK VIEW)

SWITCH

C

B

TERMINAL BLOCK

N

L

(BLUE)

WHITE

BLACK

(BROWN)

3. 2 H WIRES ARE NOT NECESSARY

2. RELAY MAY BE ON THE CONTROL

IF RELAY IS ON THE CONTROL

BOARD IN SOME CASES.

BOARD.

WIRE ASSEMBLY

I

J

9

AC IN

+

-

SENSOR

TERMINAL

BOTTOM ELEMENT

SWITCH

E

RTD PROBE

A

C

B

TOP ELEMENT

G

WIRE ASSEMBLY

CORD ASSY

120V 15A

GREEN

GROUND

F

G

WIRE ASSEMBLY

J

E

C

D

B

A

ELEMENT

TRANSFORMER

SWITCH

RELAY

TERMINAL BLOCK

GROUND

ELEMENT

D

ELECTRICAL SCHEMATIC

*

F

TIME/TEMP

GROUND

C

D

G

E

BLOCK

TRANSFORMER

CONTROL

J

CONTROLLER

RELAY

WIRING DIAGRAM SWB7R1E

FUSE (2)

SK1607

SEE NOTE 1

NOTES:

1. USE FUSES ON 230V CE MODELS

ONLY.

240V 7.5A

230V CE

REV. F 3/29/2005

A

D

(BACK VIEW)

SWITCH

C

B

N

L

(BLUE)

WHITE

BLACK

(BROWN)

2. RELAY MAY BE ON THE CONTROL

BOARD IN SOME CASES.

3. 2 H WIRES ARE NOT NECESSARY

IF RELAY IS ON THE CONTROL

BOARD.

10

AC IN

+

-

SENSOR

TERMINAL

BOTTOM ELEMENT

SWITCH

E

TRANSFORMER

C

B

TOP ELEMENT

G

WIRE ASSEMBLY

CORD ASSY

240V 7.5A

120V 15A

GREEN

GROUND

F

G

WIRE ASSEMBLY

J

E

C

D

B

A

ELEMENT

TRANSFORMER

SWITCH

RELAY

TERMINAL BLOCK

GROUND

ELEMENT

230CE

ELECTRICAL SCHEMATIC

*

SWITCH

ELEMENT

RELAY

TIME/TEMP

SWITCH

TRANSFORMER

ELEMENT

F

TIME/TEMP

A

B

GROUND

C

D

G

GROUND

*

BOTTOM ELEMENT

TOP ELEMENT

G

F

D

C

E

BLOCK

AC IN

+

-

SENSOR

E

TRANSFORMER

CONTROLLER

TIME/TEMP

D

RELAY

RTD PROBE

J

D

RELAY

RTD PROBE

J

CONTROLLER CONTROLLER

TIME/TEMP

WIRING DIAGRAM SWB7R2E

SK1608

A

FUSE (2)

SEE NOTE 1

NOTES:

1. USE FUSES ON 230V CE MODELS ONLY.

A

D

(BACK VIEW)

SWITCH

C

B

REV. F 03/29/2005

N

L

(BLUE)

WHITE

BLACK

(BROWN)

3. 2 H WIRES ARE NOT NECESSARY

2. RELAY MAY BE ON THE CONTROL

IF RELAY IS ON THE CONTROL

BOARD IN SOME CASES.

BOARD.

11

AC IN

+

-

SENSOR

C

TERMINAL BLOCK

TIME/TEMP

ELEMENT

SWITCH

C

E

TRANSFORMER

A

C

B

D

TOP ELEMENT

G

J

WIRE ASSEMBLY

CORD ASSY

240V 7.5A

120V 15A

GREEN

GROUND

D

E

F

G

WIRE ASSEMBLY

J

E

C

D

B

A

ELEMENT

C

TRANSFORMER

SWITCH

RELAY

TERMINAL BLOCK

GROUND

ELEMENT

D

230CE

ELECTRICAL SCHEMATIC

TIME/TEMP

F

BOTTOM

G

CONTROLLER

J

CONTROLLER

RTD

PROBE

SK1609

WIRING DIAGRAM SWB8SQE

FUSE (2)

SEE NOTE 1

NOTES:

1. USE FUSES ON 230V CE

MODELS ONLY.

A

D

(BACK VIEW)

SWITCH

C

B

REV. F 3/29/2005

RTD PROBE

N

L

(BLUE)

WHITE

BLACK

(BROWN)

RTD

PROBE

IF RELAY IS ON THE CONTROL

2. RELAY MAY BE ON THE CONTROL

3. 2 H WIRES ARE NOT NECESSARY

BOARD IN SOME CASES.

BOARD.

12

13

C

TIME/TEMP COTROLLER

BOTTOM ELEMENT

SWITCH

C

E

TRANSFORMER

RTD PROBE

A

C

B

D

TOP ELEMENT

G

J

WIRE ASSEMBLY

CORD ASSY

240V 7.5A

120V 15A

GREEN

GROUND

D

E

F

G

E

C

D

B

A

ELEMENT

C

TRANSFORMER

SWITCH

RELAY

TERMINAL BLOCK

GROUND

ELEMENT

D

230CE

ELECTRICAL SCHEMATIC

TIME/TEMP CONTROLLER

F

J

WIRE ASSEMBLY

RELAY

RTD PROBE

WIRING DIAGRAM SWB8RBDE

SK1788

FUSE (2)

SEE NOTE 1

NOTES:

1. USE FUSES ON 230V CE

MODELS ONLY.

REV. 03-29-2005

A

D

(BACK VIEW)

SWITCH

C

B

TERMINAL BLOCK

N

L

(BLUE)

WHITE

BLACK

(BROWN)

14

15

1 2I-Z0057 4 FOOT RUBBER

2 2E-Z3385 1 LEAD IN CORD 120V 15A

B9-73028 1 LEAD IN CORD 240V

B9-73029 1 LEAD IN CORD 230V CE

3 B9-Z1723 1 COVER-BOTTOM

4 2E-Z1858 1 SWITCH 20A/120V MOLVENO

5 2J-Z7497 1 TIMER-TEMPERATURE CONTROL

6 B9-73004 1 BODY ASSEMBLY

7 B9-73003 1 YOKE ASSEMBLY

8 B9-73002 1 HINGE TUBE ASSEMBLY

9 2P-Z1735 2 PLUG CAP 3/4

10 2C-Z2670 2 NUT 1/4-20 W/LOCKWASHER

11 2C-08-07-0064 2 ACORN NUT

12 B9-Z1733 2 CUP 7" SWB7RBE

B9-Z1790 2 CUP 8" SWB8RBLE

13 2V-Z1799 2 7" CUP SUPPORT SWB7RBE

B9-Z1800 2 8" CUP SUPPORT SWB8RBLE

14 2A-Z2644 2 SPACER 3/8X0.035

15 B9-Z8773 2 PLATE SWB7RBE

B9-Z8772 2 PLATE SWB8RBLE

16 2N-Z1457 2 ELEMENT 500W 120V SWB7RBE

2N-Z2720 2 ELEMENT 500W 240V SWB7RBE

2N-Z2010 2 ELEMENT 660W 120V SWB8RBLE

2N-Z2011 2 ELEMENT 660W 240V SWB8RBLE

17 2C-Z1674 2 STUD 1/4-20 X 2 1/4

18 2F-Z1666 1 GRID 7" BELGIAN BOTTOM SWB7RBE

B9-Z1768 1 GRID BOTTOM 8" BELGIANLITE SWB8RBLE

B9-Z4846 1 GRID 7" BELGIAN COATED SWB7RBSE

19 2A-Z6635 1 SHORT HANDLE ROD PLATED

20 2R-09-WB-0027 1 HANDLE BLACK 3/8-16

21 2F-Z1746 1 GRID 7" BELGIAN SWB7RBE

B9-Z1767 1 GRID 8" BELGIANLITE SWB8RBLE

22 2E-Z1837 1 RTD PROBE 2000 OM

23 B9-Z1805 1 BRACKET STOPPER

24 B9-73010 1 TOP HINGE ASSEMBLY

- 2A-Z2664 1 PIN-HINGE

25 B9-Z1765 1 LOWER HINGE MACHINED

26 B9-Z2643 2 SPACER 1/4X0.028

27 B9-73011 1 BRACKET REAR ASSEMBLY

28 B9-Z1772 2 TENSION SPRING

29 B9-Z1776 1 PLATE CLAMP

30 B9-73033 1 COLLAR ASSEMBLY

31 2C-Z2613 1 SET-SCREW 10-32X3/8

32 B9-Z1724 1 COVER-BACK

33 2E-05-07-0351 1 TRANSFORMER 115/10V 6VA 120V

2E-05-07-0350 1 TRANSFORMER 230V/10V 6VA 240V

2E-Z2974 1 TRANSFORMER 230V/10V CE 230V CE

34 2E-Y9050 1 TERMINAL BLOCK

36 2E-Z2145 2 FUSEHOLDER 230V CE

37 2E-Z2146 2 FUSE CARRIER 230V CE

38 2E-Z2148 2 FUSE 5A 250V 230V CE SWB7RBE

2E-Z2147 2 FUSE 8A 250V 230V CE SWB8RBLE

NI 2K-Y1139 1 BUSHING, HINGE TUBE

NI B9-Z1760 1 DRIP TRAY (not shown)

NI 2M-Z1753 1 CONTROL PANEL OVERLAY

PARTS LIST June 3, 2009, Rev F

IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE 1

INCLUDE MODEL AND SERIAL NUMBER OF 1

Some items are included for illustrative purposes only and in certain instances may not be available.

Number

Per

Unit

Description and Model Designation

Star Manufacturing International, Inc.

MODEL

Part

Number

Key

Number

SWB7RBE/SWB8RBLE Wafe Bakers

NI = NOT ILLUSTRATED

16

17

PARTS LIST April 7, 2010, Rev F

SWB7R1E/SWB7R2E Wafe Bakers

IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE

INCLUDE MODEL AND SERIAL NUMBER OF

Some items are included for illustrative purposes only and in certain instances may not be available.

Number

Per

Unit

Description and Model Designation

Star International Holdings, Inc. Company

MODEL

Part

Number

Key

Number

1 2I-Z0057 4 FOOT RUBBER

2 2E-Z3385 1 LEAD IN CORD 120V 15A

B9-73028 1 LEAD IN CORD 240V

B9-73029 1 LEAD IN CORD 230V CE

3 B9-Z1926 1 COVER-BOTTOM SINGLE SWB7R1E

B9-Z1927 1 COVER-BOTTOM DOUBLE SWB7R2E

4 2E-Z1858 1/2 SWITCH 20A/120V MOLVENO SWB7R1E/SWB7R2E

5 2J-Z7497 1/2 TIMER-TEMPERATURE CONTROL SWB7R1E/SWB7R2E

6 B9-73074 1 BODY ASSEMBLY SINGLE SWB7R1E

B9-73073 1 BODY ASSEMBLY DOUBLE SWB7R2E

7 2P-Z1735 2/4 PLUG CAP 3/4 SWB7R1E/SWB7R2E

8 2C-Z2670 2/4 NUT 1/4-20 W/LOCKWASHER SWB7R1E/SWB7R2E

9 2C-08-07-0041 1/2 ACORN NUT SWB7R1E/SWB7R2E

10 2D-Z7611 1/2 CUP 7" SWB7R1E/SWB7R2E

11 2V-Z1799 1/2 7" CUP SUPPORT SWB7R1E/SWB7R2E

12 2A-Z2644 2/4 SPACER 3/8X0.035 SWB7R1E/SWB7R2E

13 2C-Z1674 2/4 STUD 1/4-20 X 2 1/4 SWB7R1E/SWB7R2E

14 B9-Z8773 2/4 PLATE SWB7R1E/SWB7R2E

15 2N-Z2843 1/2 ELEMENT ROD 475W 120V SWB7R1E/SWB7R2E

2N-Z2264 1/2 ELEMENT ROD 475W 240V SWB7R1E/SWB7R2E

16 2F-Z1770 1/2 GRID 7" STANDARD BOTTOM SWB7R1E/SWB7R2E

17 2F-Z1769 1/2 GRID 7" STANDARD SWB7R1E/SWB7R2E

18 2N-Z2040 1/2 ELEMENT ROD 425W 120V SWB7R1E/SWB7R2E

2N-Z2135 1/2 ELEMENT ROD 425W 240V SWB7R1E/SWB7R2E

19 2R-09-WB-0027 1/2 HANDLE BLACK 3/8-16 SWB7R1E/SWB7R2E

20 2A-Z2606 1/2 SPACER SWB7R1E/SWB7R2E

21 B9-Z2016 1/2 CUP 7" SWB7R1E/SWB7R2E

22 B9-73044 1/2 CUP SUPPORT HINGE ASSEMBLY SWB7R1E/SWB7R2E

23 B9-04-WB-0198 1/2 PIN HINGE SWB7R1E/SWB7R2E

24 2C-08-07-0040 2/4 ACORN NUT SWB7R1E/SWB7R2E

25 2E-Z1837 1/2 RTD PROBE 2000 OHM SWB7R1E/SWB7R2E

26 B9-04-WB-0231 1/2 WIRE CHANNEL COVER SWB7R1E/SWB7R2E

27 B9-Z2008 1/2 WIRE CHANNEL SWB7R1E/SWB7R2E

28 B9-Z2612 1/2 BRACKET-TRANSFORMER SWB7R1E/SWB7R2E

29 2E-05-07-0351 1/2 TRANSFORMER 115/10V 6VA 120V SWB7R1E/SWB7R2E

2E-05-07-0350 1/2 TRANSFORMER 230V/10V 6VA 240V SWB7R1E/SWB7R2E

2E-Z2974 1/2 TRANSFORMER 230V/10V 230V CE SWB7R1E/SWB7R2E

30 B9-Z1925 1 BRACKET-TERMINAL

31 2E-Y9050 1 TERMINAL BLOCK

34 2E-Z2145 2 FUSEHOLDER 230V CE SWB7R2E

35 2E-Z2146 2 FUSEHOLDER 230V CE SWB7R2E

36 2E-Z2147 2 FUSE 8A 250V 230V CE SWB7R2E

NOT ILLUSTRATED

-- B9-Z1853 1 DRIP TRAY, SINGLE SWB7R1E

-- B9-Z1751 1 DRIP TRAY, DOUBLE SWB7R2E

-- 2M-Z1753 1 CONTROL PANEL OVERLAY - SINGLE SWB7R1E

-- 2M-Z2624 1 CONTROL PANEL OVERLAY - DOUBLE SWB7R2E

1

18

19

PARTS LIST April 7, 2010, Rev F

SWB8SQE Wafe Baker

IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE

INCLUDE MODEL AND SERIAL NUMBER OF

Some items are included for illustrative purposes only and in certain instances may not be available.

Number

Per

Unit

Description

MODEL

Part

Number

Key

Number

1 2I-Z0057 4 FOOT RUBBER

2 2E-Z3385 1 LEAD IN CORD 120V 15A

B9-73028 1 LEAD IN CORD 240V

B9-73029 1 LEAD IN CORD 230V CE

3 B9-Z1723 1 COVER-BOTTOM

4 2E-Z1858 1 SWITCH 20A/120V MOLVENO

5 2J-Z7497 1 TIMER-TEMPERATURE CONTROL

6 B9-73004 1 BODY ASSEMBLY

7 B9-Z1845 1 FRONT SUPPORT

8 2P-Z1735 2 PLUG CAP 3/4

9 2C-Z2670 2 NUT 1/4-20 W/LOCKWASHER

10 2C-08-07-0064 1 ACORN NUT

11 B9-Z1830 2 CUP

12 B9-Z1831 2 CUP SUPPORT

13 2A-Z2644 2 SPACER 3/8X0.035

14 B9-Z8774 2 PLATE

15 2N-Z2841 1 ELEMENT 855W 120V

2N-Z2249 1 ELEMENT 855W 240V

16 2C-Z1674 2 STUD 1/4-20 X 2 1/4

17 B9-Z1780 1 GRID 8" SQUARE BOTTOM

18 2R-09-WB-0027 1 HANDLE BLACK 3/8-16

19 2A-Z2607 1 SPACER

20 B9-Z1779 1 GRID 8" SQUARE

21 2N-Z2842 1 ELEMENT 790W 120V

2N-Z2248 1 ELEMENT 790W 240V

22 B9-85016 1 CUP SUPPORT SQUARE ASSEMBLY

23 B9-85015 1 TOP HINGE ASSEMBLY

24 B9-Z1764 1 LOWER HINGE MACHINED

25 B9-Z2643 2 SPACER 1/4X0.028

26 2T-Z2043 2 THERMOSTAT

2E-Z1837 1 RTD PROBE 2000 OM

27 B9-Z1724 1 COVER-BACK

28 2E-05-07-0351 1 TRANSFORMER 115/10V 6VA 120V

2E-05-07-0350 1 TRANSFORMER 230V/10V 6VA 240V

2E-Z2974 1 TRANSFORMER 230V/10V 230V CE

29 2E-Y9050 1 TERMINAL BLOCK

30 B9-Z1859 1 PLATE-COVER-HINGE

31 B9-Z1835 1 SPACER

33 2E-Z2145 2 FUSEHOLDER 230V CE

34 2E-Z2146 2 FUSE CARRIER 230V CE

35 2E-Z2147 2 FUSE 8A 250V 230V CE

NOT ILLUSTRATED

-- B9-Z1760 1 DRIP TRAY

-- 2M-Z1753 1 CONTROL PANEL OVERLAY

1

Star International Holdings, Inc. Company

20

Page is loading ...

Star Manufacturing SWB8RBDE Operating instructions

This manual is also suitable for

Star Manufacturing SWB8RBDE Operating instructions

Related papers

Other documents