Align 500P is a power feed device that can be installed on milling machines to automate the movement of the table or knee along the X, Y, and Z axes. It features a 160 W motor and a rated speed of 0-160 RPM, providing ample power and precision for various milling operations. The device comes with a user-friendly control panel that includes a speed control knob, an on/off switch, and an anti-vandal switch for added safety. Additionally, it has a built-in circuit breaker to protect the device from electrical overloads.
Align 500P is a power feed device that can be installed on milling machines to automate the movement of the table or knee along the X, Y, and Z axes. It features a 160 W motor and a rated speed of 0-160 RPM, providing ample power and precision for various milling operations. The device comes with a user-friendly control panel that includes a speed control knob, an on/off switch, and an anti-vandal switch for added safety. Additionally, it has a built-in circuit breaker to protect the device from electrical overloads.
Align 500P is a power feed device that can be installed on milling machines to automate the movement of the table or knee along the X, Y, and Z axes. It features a 160 W motor and a rated speed of 0-160 RPM, providing ample power and precision for various milling operations. The device comes with a user-friendly control panel that includes a speed control knob, an on/off switch, and an anti-vandal switch for added safety. Additionally, it has a built-in circuit breaker to protect the device from electrical overloads.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI