Motorola APX 7500 User manual

Type
User manual

This manual is also suitable for

EnglishQuick Reference
Quick Reference
Special Keys
S Press to turn phone on and off.
I Press to see more information on the current
operation.
O Press to accept call, setting, option,...
N Press to switch privacy mute on and off.
Q Press to access the Phone Book menu.
E Press to access the Messages menu.
M Press to access the Options menu.
C Press to reject call, setting, option,...
Making a Call
Enter CO.
Receiving a Call
Press O or open the flip.
Ending a Call
Press O or close the flip.
Making an Emergency Call
Enter 112O. The call will be directed to a
central emergency operator.
Adjusting the Ringer Volume
Press the volume buttons on the right hand side of the phone
with the flip closed.
Calling the Last Number Dialled
1 Press the O key. The last number dialled will be
shown in the display.
2 Press O to call the number.
One Touch Dialling
Press and hold the appropriate digit key 1 to 9.
Dialling Phone Book Numbers
Press Q GOO
Storing Numbers in the Phone Book
1 Press and hold Q to access the Phone Book.
2 Press Q to choose whether to store the number in the
phone memory or the SIM card memory. Press O.
3 Enter CO (remember to include the full area
code).
4 Enter the name followed by O and then the location
number followed by O.
5 The phone will confirm the location of the stored
number, for example: Stored 123.
English Quick Reference
Last Ten Calls
Incoming Call Alert
Show Last Call
Mute Car Radio
Restrict My Phone Number
Adjust Ring Volume
Resettable Call Meters
Automatic Answer
Call Diverting
Phone Lock
Set Audible Call Timers
Automatic Handsfree
Call Waiting
Call Barring
Require SIM Card PIN
Show Meter During Calls
Safety Timer
Call Restrictions
New Security Code
Extended Menus
Set Meter Format
Auxiliary Alert
Language Selection
Change Greeting
Battery Saving Mode
Select Keypad Tones
Phone Status
Set Call Cost Rates
Lifetime Meter
*
Call Related
Features
Accessory
Setup
Phone Setup
Call Meters
Available Networks
Network Search
Preferred Networks
Find New Network
Network
Selection
M
Add To Phone Memory
To Phone Memory
Call Number
Add To SIM Card Memory
To SIM Card Memory
Modify Name Or Number
Modify Name Or Number
Check Phone Capacity
To Phone & SIM Memory
Erase Name And Number
Erase Name And Number
Check SIM Capacity
No Memory Restrictions
Call Number
Find Entry
By Name
Find Entry
By Location
Add Entry
Show My
Phone Number
Prevent Access
Check Capacity
Q
Enter Name
Enter Location
XXXXXXXXXXXXXX
Enter My
Phone Number
Edit Number Edit Name
Menus
Options Menu
Phone Book Menu
On
.
.
.
.
.
.
On
Go to Next Message
Off
Off
Delete Message
Return Call
Call Voicemail
Received
Messages
Message
Settings
E
Calling
7 Messages
4New
Cell Broadcast
Message Alert
Enter Voicemail Number
Voicemail Number
Automatic
First
New Message
Next
New Message
Last
New Message
First
Old Message
Last
Old Message
Messages Menu
Items shown in are available only
when are enabled.Extended Menus
italics
The section is available
only when a car kit is fitted.
Accessory Setup
MENU
Menu Navigation
*
M
O
C
EnglishIntroduction 1
Introduction
Congratulations on your purchase of a cellular telephone from Motorola, the world
leader in cellular technology.
All Motorola cellular telephones are manufactured to exacting specifications and world-
class quality standards, and are designed to withstand the harshest environmental
conditions. Our commitment to Total Customer Satisfaction and over sixty five years of
experience in personal communications mean you can depend upon the quality of this
Motorola product.
This cellular telephone incorporates
Personality. Unique to Motorola, Personality
removes the complexity of cellular communications by guiding you through the features
and presenting you with simple choices every step of the way.
Personality also allows
you to personalise the way you use your phone - for example, different ringer tones, a
phone book and network selection preferences - all presented with clarity and simplicity.
In this manual, each of the
Personality features is identified with an O symbol to
indicate that it is customisable to meet your requirements.
This cellular telephone has been designed for use with the worldwide GSM (Global
System for Mobile communications) network. By using digital communications methods,
your phone provides a number of advantages over traditional cellular systems:
Superior speech quality is attained without the usual background noises and
interference.
Your conversation may be encrypted for security. Conversations cannot be
eavesdropped using scanning equipment when the signal is encrypted.
You are not restricted to use within one country.
Your subscriber number is not contained within the phone as with other systems.
Instead, a 'Smart Card' known as a SIM (Subscriber Identity Module) is supplied by your
Cellular Service Provider. All call billing is made to the subscriber number on the card
whether it is used in this or any other GSM unit.
ABefore you use your phone, please ensure that you charge your battery for at least
14 hours.
*
7
4
1
N
S
Q
I
E
M
C
O
0
8
5
2
#
9
6
3
MOTOROLA
GS
M
English 2 Introduction
EnglishContents 3
The Manufacturer reserves the right to make changes in technical and product specifications without prior notice.
Contents
Index
A comprehensive index .............................................................................................................................................61
Useful Information
Space for you to make a record of your phone book numbers and useful information...................................57
Accessories
Details the accessories available for use with your phone ..................................................................................55
Using The Options Menu
Provides an explanation of the Options Menu and how to use it .......................................................................33
Using The Messages Menu
Provides an explanation of the Messages Menu and how to use it ....................................................................29
Using The Phone Book Menu
Provides an explanation of the Phone Book Menu and how to use it.................................................................23
Menu Navigation
Explains how to access and use the phone’s menus ..............................................................................................21
Using Your Phone
Introduces your phone and explains how to charge batteries and make a call...................................................9
Safety
Important information for the efficient and safe operation of your phone........................................................ 5
Understanding this Manual
Explains how to use this manual................................................................................................................................ 4
English 4 Contents
The Phone Operation and Menu System
Your phone has been designed to be used in as simple and
consistent a manner as possible. We have made the next,
most obvious, action selectable by pressing the O key.
Many of your phone options are accessed by a simple, three
key, menu system. A full description of the menus and how to
move around them is covered in the later section Menu
Navigation. When the manual describes the use of each menu
item, it will be assumed that you are familiar with the menu
system.
The Keys
The key press features of your phone are represented in this
manual using symbols, so that you may locate and use the
required sequence quickly. A sequence of key presses may be
shown as follows:
MOC
This means that you should press the
M
key followed by the
O
key and then the
C
key, in sequence, not
simultaneously.
Multiple Key Presses
Symbols, such as the following, will appear in this manual.
They are not keys on the phone, but they represent multiple
key presses. For example:
C - enter the required telephone number.
A - enter your Personal Identification Number.
B - enter your unlock code.
G - enter the location number.
The Display
The LCD display of your phone is also represented graphically
within this manual, either as a full screen display such as this:
MOTOROLA
GS
M
or as a line of text or symbols such as this:
Enter PIN, q, m
Other Symbols
You will find the following symbols used throughout this
manual:
A A Note contains additional information which is
relevant to the feature/item.
! A Caution contains important additional information
which is relevant to the efficient and/or safe usage of
your phone.
O This symbol indicates that the feature is a
Personality feature that can be customised to meet
your requirements.
L This symbol indicates a quick access key sequence for
the feature.
Understanding this Manual
EnglishSafety 5
Efficient Phone Operation
For your phone to operate at the lowest power level, consistent with
satisfactory call quality:
If your phone has an extendable antenna, extend it fully. Some models
allow you to place a call with the antenna retracted. However, your phone
operates more efficiently with the antenna fully extended.
Hold the phone as you would any other telephone. While speaking directly
into the mouthpiece, position the antenna up and over your shoulder.
Do not hold the antenna when the phone is "IN USE". Holding the antenna
affects call quality and may cause the phone to operate at a higher power
level than needed.
Antenna Care and Replacement
Do not use the phone with a damaged antenna. If a damaged antenna
comes into contact with the skin, a minor burn may result. Replace a
damaged antenna immediately. Consult your manual to see if you may
change the antenna yourself. If so, use only a manufacturer-approved
antenna. Otherwise, have your antenna repaired by a qualified technician.
Use only the supplied or approved antenna. Unauthorised antennas,
modifications or attachments could damage the phone and may contravene
local RF emission regulations or invalidate type approval.
IMPORTANT
For the efficient and safe operation of
your GSM Cellular Telephone,
Read this information before use.
Your GSM cellular telephone is one of the most exciting and innovative
electronic products ever developed. With it you can stay in contact with
your office, your home, emergency services, and others, wherever service is
provided.
General
Your cellular telephone utilizes the GSM standard for cellular technology.
GSM is a newer radio frequency ("RF") technology than the current FM
technology that has been used for radio communications for decades. The
GSM standard has been established for use in the European Community
and elsewhere.
Your cellular telephone is actually a low power radio transmitter and
receiver. It sends out and receives radio frequency energy. When you use
your cellular telephone, the cellular system handling your call controls both
the radio frequency and the power level of your cellular telephone.
Exposure To RF Energy
There has been some public concern about possible health effects of using
cellular telephones. Although research on health effects from RF energy has
focused for many years on the current RF technology, scientists have begun
research regarding newer radio technologies such as GSM. After existing
research had been reviewed, and after compliance to all applicable safety
standards had been tested, it has been concluded that the product is fit for
use.
If you are concerned about exposure to RF energy there are things you can
do to minimize exposure. Obviously, limiting the duration of your calls will
reduce your exposure to RF energy. In addition, you can reduce RF exposure
by operating your cellular telephone efficiently by following the below
guidelines.
Safety
English 6 Safety
Driving
Check the laws and regulations on the use of cellular telephones in the
areas where you drive. Always obey them. Also, when using your phone
while driving, please:
give full attention to driving,
use hands-free operation, if available, and
pull off the road and park before making or answering a call if driving
conditions so require.
Electronic Devices
Most electronic equipment, for example in hospitals and motor vehicles is
shielded from RF energy. However, RF energy may effect some
malfunctioning or improperly shielded electronic equipment.
Vehicle Electronic Equipment
Check with your vehicle manufacturer's representative to determine if any
on board electronic equipment is adequately shielded from RF energy.
Medical Electronic Equipment
Consult the manufacturer of any personal medical devices (such as
pacemakers, hearing aids, etc.) to determine if they are adequately shielded
from external RF energy.
Turn your phone OFF in health care facilities when any regulations posted in
the area instruct you to do so. Hospitals or health care facilities may be
using RF monitoring equipment.
Aircraft
Turn your phone OFF before boarding any aircraft.
Use it on the ground only with crew permission.
Do not use in the air.
To prevent possible interference with aircraft systems, Federal Aviation
Administration (FAA) regulations require you to have permission from a
crew member to use your phone while the plane is on the ground. To
prevent interference with cellular systems, local RF regulations prohibit
using your phone whilst airborne.
Children
Do not allow children to play with your phone. It is not a toy. Children could
hurt themselves or others (by poking themselves or others in the eye with
the antenna, for example). Children could damage the phone, or make calls
that increase your telephone bills.
Blasting Areas
To avoid interfering with blasting operations, turn your unit OFF when in a
"blasting area" or in areas posted: "turn off two-way radio". Construction
crews often use remote control RF devices to set off explosives.
Potentially Explosive Atmospheres
Turn your phone OFF when in any area with a potentially explosive
atmosphere. It is rare, but your phone or its accessories could generate
sparks. Sparks in such areas could cause an explosion or fire resulting in
bodily injury or even death.
Areas with a potentially explosive atmosphere are often, but not always,
clearly marked. They include fuelling areas such as petrol stations; below
decks on boats; fuel or chemical transfer or storage facilities; and areas
where the air contains chemicals or particles, such as grain, dust, or metal
powders.
Do not transport or store flammable gas, liquid, or explosives, in the
compartment of your vehicle which contains your phone or accessories.
Before using your phone in a vehicle powered by liquefied petroleum gas
(such as propane or butane) ensure that the vehicle complies with the
relevant fire and safety regulations of the country in which the vehicle is to
be used.
EnglishSafety 7
Safety Standards Battery Safety
To prevent injury or burns, do not allow metal objects to contact or short
circuit the battery terminals.
This Cellular Telephone complies with all
applicable RF safety standards.
This cellular telephone meets the standards and recommendations for the
protection of public exposure to RF electromagnetic energy established by
governmental bodies and other qualified organisations, such as the
following:
Verband Deutscher Elektroingenieure (VDE) DIN-0848
Directives of the European Community, Directorate General V in
Matters of Radio Frequency Electromagnetic Energy
National Radiological Protection Board of the United Kingdom.
GS-11, 1988.
American National Standards Institute (ANSI)/IEEE. C95. 1-1992
National Council on Radiation Protection and Measurements
(NCRP). Report 86
Department of Health and Welfare Canada, Safety Code 6.
V1.1 2/95
English 8 Safety
EnglishUsing Your Phone 9
Using Your Phone
*
7
4
1
N
S
Q
I
E
M
C
O
0
8
5
2
#
9
6
3
Introducing Your Phone
Special Keys
S Press to turn phone on and off.
I Press to see more information on the current
operation.
O Press to accept call, setting, option,...
N Press to switch privacy mute on and off.
Q Press to access the Phone Book menu.
E Press to access the Messages menu.
M Press to access the Options menu.
C Press to reject call, setting, option,...
Volume Buttons
The buttons on the right hand side of your phone
adjust the earpiece, keypad tone and ringer
volume levels. Volume is increased with the upper
button and decreased with the lower button.
Adjusting the Earpiece Volume
Press the volume buttons during a call.
Adjusting the Keypad Tone Volume
With the flip open, press the volume buttons
when not in a call.
Adjusting the Ringer Volume
With the flip closed, press the volume buttons.
The Other Keys
The digit keys, used to enter
phone numbers, security codes
and other numeric items.
<#Press to move
backward and forward
through entries.
The Flip
The flip can be used to answer
and end calls.
SIM Card Release
The SIM card release button is on the left
hand side of your phone. To remove the SIM
card, slide this button down toward the base
of the phone and pull the SIM card out.
English 10 Using Your Phone
The Display
The Liquid Crystal Display (LCD)
on your phone can display two
rows of twelve alphanumeric
characters as well as useful
information symbols.
The various elements of the display are as follows:
ABC123 Characters are used to display messages and
telephone numbers.
q
Battery Charge Level. When the battery is fully
charged this symbol will be on. As the battery
charge is used, the symbol will begin to flash
slowly. The flash will become rapid when the
battery is nearly depleted. Replace or recharge
the battery at this point.
rx
Signal Strength. The more segments displayed
in the bar graph, the better the signal strength.
j
Power On. Displayed while your phone is
switched on.
k
In Use. Displayed when a call is in progress.
l
Roam. This symbol will be on, or flashing, when
you are registered on a system other than your
home system.
On, for preferred networks.
Flashing, for non-preferred networks.
m
No Service. This symbol will be on when you are
out of cellular system coverage, you will not be
able to make or receive calls.
The symbol will flash, when you are in an area
with coverage but are not registered on the
system. You will be able to make emergency calls
using the special GSM emergency number, 112,
but cannot make or receive ordinary calls.
o
Short Message Service. When the phone has
received a message this symbol will be on. The
symbol will flash when your message storage
area is full.
Low Temperature Use
The liquid crystal display screen used in your phone will behave
differently at extremely low temperatures. You may notice that
the display responds slowly to key presses, this is to be
expected and does not affect the phone operation in any way.
MOTOROLA
GS
M
EnglishUsing Your Phone 11
Attaching and Using Batteries
Charging a New Battery
To ensure maximum battery performance, it is recommended
that a new battery (or battery that has not been used for
several months) be charged for at least 14 hours before use,
but not for more than 24 hours.
AA new battery, or a battery that has not been used for
several months, may cause a premature fully charged
indication on the charger. Ignore this indication and let the
battery charge for several more hours, remove and re-insert
the battery into the charger, and charge for an additional
14 hours.
AA new battery will require two to three full charge/
discharge cycles in order to achieve the stated
performance.
Important Charging Information
To ensure that you enjoy maximum battery life and use your
battery to it's fullest capacity:
Always use Motorola approved battery chargers.
The battery should be at or near room temperature when
charging.
Once a week, allow your battery to discharge completely
before recharging ( to fully discharge, leave your phone on
until it turns itself off).
Do not leave the battery in the charger for longer than 24
hours.
Fitting Your Battery
Place the battery onto the rear of the phone just below the
marked arrow indicators. Next, slide the battery upwards on
the phone's moulded runners, until it locks into place.
Removing Your Battery
Press the release catch inwards and simultaneously slide the
battery downwards, until it reaches the end of it's travel. Next,
pull the battery away from the rear of the phone.
Low Battery Warning
When the battery level becomes too low for normal operation,
a warning signal (two double beeps) will sound. The battery
symbol
q
will begin to flash rapidly.
When the battery is completely discharged, your phone will
turn off.
English 12 Using Your Phone
Charger Indicators
Both chargers have two indicators at the front to provide
charging status information. The lower indicator represents
the front slot while the upper indicator shows charge status
for the rear slot. On the Overnight Charger, the indicators are
yellow and show that the phone and/or battery are being
charged. The Rapid Charger Base indicators use a three colour
code to show the charge status, as follows:
Red Rapid charge
Yellow Trickle charge
Green Charging completed
On both chargers, when both slots are used, the front slot will
be serviced first, followed by the rear slot.
! It is normal for batteries to become warm during charging.
! Do not leave batteries to charge for more than 24 hours.
Desktop Charging of Your Battery
ATypical charge times for the desktop chargers are:
Slim XT NiCd: Overnight Charger - 10 hours
Rapid Charger Base - 90 minutes
Ultra Slim NiMh: Overnight Charger - 10 hours
Rapid Charger Base - 90 minutes
Adapter Connection
Two types of charger units are available for use with your
phone: the Overnight Charger and the Rapid Charger Base (a
rapid charging variant). Both charger models have two
charging slots so that you may charge your phone and
unattached batteries. The front slot can accommodate a spare
battery or a battery attached to your phone. The rear slot
accepts unattached batteries only.
Both charger models are supplied with a mains adapter which
can be plugged into a standard mains socket. The mains
adapter lead can then be plugged into the socket at the rear
of the charger unit.
EnglishUsing Your Phone 13
Inserting Your Phone into the Charger
Tilt your phone back until it rests at the same angle as the cut
away front panel of the charger. Next, guide your phone into
place in the front slot, until the lower indicator lights up.
Inserting a Spare Battery into the Charger
If you wish to insert a spare battery at the same time as
charging your phone, slide the battery into the rear slot, at the
angle shown, until the upper indicator lights up.
English 14 Using Your Phone
Using Your SIM Card
SIM Card Insertion
The SIM card can be inserted into the phone at any time,
before or after the phone is switched on.
Insert the SIM card into the slot in the base of the phone,
as shown.
If the SIM card is inserted the wrong way round, or damaged,
the Check Card message may be displayed. Remove the
SIM card, check that it is the right way round and then
re-insert it into the phone.
If either of the Bad Card See Supplier or
Blocked See Supplier messages are displayed, then
you will need to contact your Cellular Service Provider.
SIM Card Removal
Push the release button towards the base of the phone and
pull the SIM card out. The SIM card can be removed at any
time, before or after the phone is switched off.
EnglishUsing Your Phone 15
Switching the Phone On and Off
To switch the phone on or off press the S key.
If you are switching the phone on and there is no SIM card
inserted, you will be asked to insert one. Once inserted, the
phone will check that the SIM card is valid.
Two security codes may be requested at this point:
the SIM card PIN code
the phone unlock code.
Entering Your SIM Card PIN Code
To enter the PIN code, press AO.
As you type in each digit of the PIN code a * character will be
displayed.
If you have made a mistake, pressing and releasing the C
key will remove the last digit. Holding the C key down will
remove the entire entry.
When the PIN code is complete press the O key.
If the PIN code entered is incorrect, the warning message
Wrong PIN will be displayed, followed by Enter PIN.
!If the PIN number is entered incorrectly three times in a
row, your phone will automatically lock-up and the
Blocked message will be displayed.
The code can be changed, see 'Change SIM PIN Code' in the
Options Menu section for more details.
Unblocking Your SIM Card
To unblock your SIM card, enter the following key sequence:
* * 0 5 * E O
F O F O
The 8 digit unblocking code will have been provided with your
SIM card by your Cellular Service Provider.
The new PIN code must contain four to eight digits.
! If this operation is performed incorrectly 10 times in a row,
your SIM card will become permanently blocked.
O Entering Your Unlock Code
If your phone displays the message Enter Phone Unlock
Code you must enter your unlocking code by pressing
BO.
The unlock code is a four digit number which is set at
manufacture to 1234. The code can be changed, see 'Change
Unlock Code' in the Options Menu section for more details.
English 16 Using Your Phone
Phone Calls
To make or receive a phone call, your phone must be switched
on, unlocked and have the antenna fully extended.
If the m symbol is showing, your phone has been unable to
find a cellular service. It will not be possible to make or receive
a phone call unless you move to an area where there is a GSM
service. When a service has been found, a series of rising bars,
x, will show the signal strength.
There a number of different ways to make a phone call:
Using the digit keys.
Using automatic redial.
Redialling the last number called.
One touch dialling a Phone Book entry*.
Dialling a Phone Book entry*.
Calling an embedded number in a message.
A*Your phone contains a 'phone book' that can be used to
store names and telephone numbers.
Making a Phone Call
The simplest method of making a phone call is to enter the
number using the digit keys then press O.
AIf you make a mistake, press and release the C key to
remove the last digit. Holding the C key down will
remove the entire number.
Your phone will then attempt to make the phone call. The
display will show Calling to show the call attempt is being
made. If the call is not answered, pressing O, or closing the
flip, at this point will end the attempt.
When the phone call is answered, the display will change to
Connected for a few seconds, followed by End Call?.
To end your call press O, or close the flip.
If service is temporarily interrupted during a phone call, the
message Reconnecting may appear. Your phone will
automatically try to reconnect the call if possible.
Automatic Redial
If your call attempt does not succeed, the message Redial?
will be displayed for five seconds. Pressing O at this point
will automatically redial the phone number.
When the call is answered, you will hear a short ring tone.
The maximum number of redial attempts is set by your
Cellular Service Provider. If the phone call cannot be connected
within this maximum, the message Redial Failed will be
shown.
EnglishUsing Your Phone 17
Redialling the Last Number Called
To call the last number dialled, press the O key when in
standby mode. The last number dialled will be shown in the
display, press O to call the number.
O One Touch Dialling Phone Book Numbers
To quickly retrieve and dial a number stored in Phone Book
locations 1 to 9, press and hold the appropriate digit key. For
example, pressing and holding 2 will dial the phone
number stored in location 2 of your Phone Book.
AYou do not need to press O to call the number.
O Dialling Phone Book Numbers
To quickly retrieve a number from your Phone Book:
Press QG. For example Q23 will retrieve
the phone number stored in location 23 of your Phone Book.
Press OO to call the number.
Calling an Embedded Number in a Message
Details on how to call a number embedded in a message are
given in Using the Messages Menu.
International Phone Calls
To make an international phone call press and hold the 0
key. After a couple of seconds the international dialling prefix
+ will appear in the display, this allows you to call from any
country without knowing the local international access code.
Now enter the country code, followed by the phone number.
The country code follows the conventional format, 49 for
Germany, 44 for the UK, 46 for Sweden, etc.
Just like a conventional international call, remove the leading
'0' of the area code when you dial.
The Useful Information section at the end of this manual
contains a list of the more commonly used international dial
codes.
English 18 Using Your Phone
GSM Emergency Calls
The worldwide GSM network provides a standard number,
112, to dial in cases of emergency.
Provided that your phone has found a network, you will be
able to make an emergency call. The call can be made with or
without a SIM card inserted and regardless of any security
codes.
The emergency call will be directed to a central emergency
operator.
To dial the GSM emergency number, press 112O.
While the emergency call is being made and connected, the
display will show Emergency.
Inserting Pauses Into Phone Numbers
To obtain a three second 'pause' character in a phone number,
press and hold the * key for a couple of seconds, the
pause symbol Ü will appear.
The pause character produces a three second delay whenever
it is used. However, the first pause character in a phone
number is a special case, it will not begin its delay until the call
is answered.
Pause - A Working Example.
If, for example, you have a tone-based voicemail system on
555-6911, with a mailbox number 1066# and password
2001#. Then you may dial the following number
5556911Ü1066Ü2001O.
The first part of the number would be used to call the
voicemail system.
When the call is answered the first pause will produce a delay
of three seconds before the tones for 1066 are sent to select
the mailbox.
There will be a second pause of three seconds before the
tones for 2001 are sent as the password.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66

Motorola APX 7500 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI