INSTRUCTION SHEET
99940418 © 2019 Greenlee Tools, Inc. IM 1543 REV 2 10/19
Caster Installation
for Models 3548, 5860, and MTS-100
50084267 fastener kit includes the following:
• 3/8-16 x 1 carriage bolt
• 3/8-16 hex nut
• 3/8 split lock washer
To install casters:
1. Position carriage bolts through square holes in
bottom of box.
2. Mount casters from underside.
3. Put washers over bolts.
4. Thread nuts onto bolts.
5. Tighten nuts to approximately 20 foot-pounds.
-
1
Greenlee Caster Installation - Job Box Manual User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI