sM
LCD.32E3OA
INSTRUCTION
MAN UAL
LCD
TV
TO THE OWNER
IMPORTANT INFORMATION
lf
a television
is not
positioned
in a sufiiciently stable
localion, it can be
polentially
hazardous
due
to falling. Many
injuries,
particularly
to
children,
can be avoided
by taking simple
precautions
such as:
.
Using cabinets
or stands
recommended by
the manufacturer of the television.
.
Only using
fumiture
that
can
safely support
the television.
o
Ensuring the television
is not overhanging
the edge of
the
supporting furniture.
.
Not
placing
the television on
lall furniture
(for
example, cupboards or bookcases)
without
anchoring both
the
furniture and
the leleMsion
to
a suitable
support.
.
Not standing
the
lelevisions on cloth or other
materials
placed
between the lelevision and supporting furniture.
o
Educating children
about
the
dangers
of climbing of climbing on
furniture to
reach
the television
or
ils
controls.
Before operating
this LCD TV,
read this manual thoroughly and operate
the
LCD W
propedy.
This LCD TV
provides
many convenient
features and funclions. Operating
the
LCD TV
properly
enables
you
to
manage those
features and
maintains it in
property
condition
for a considerable time.
lmproper
operation
may result
in not only shortening
the
product-life,
but
also
malfunctions, fire hazard, or olher
accidents.
lf
your
LCD
TV
seems
to operate
improperly, read
this manual again,
check operations and cable
connec{ions and
try the solutions
in the
"TROUBLESHOOTING'
section.
lf the
problem
still
persists,
contact
the
dealer
where
you
purchased
the LCD W or
the service center.
A
SAFETY
PREcAUTToN
WARNING:TO
REDUCE THE RISK OF
FIRE OR ELECTRIC SHOCK,
DO
NOT EXPOSE THISAPPLIANCE
TO
RAIN OR MOISTURE.
.
Install the LCD
W in a
proper position.
lf nol, it
may result in a
fire hazard.
.
Provide
appropriate
space
on
the iop,
sides
and rear ofthe
LCD W cabinet
for allowing air
circulation
and cooling
the LCD W.
.
Minimum clearance
must be
maintained.
It the
LCD TV is lo be built
into a comparlment or
locm
similarly enclosed,
the
minimum distances
musl be
mainlained.
Do not cover
the ventilation slot on
the
LCD TV. Heat build-uo
can reduce
lhe service life
of
your
LCD W, and can
also be dangerous.
.
lf
the LCD TV is not
to be used for an extended
I
time, unplug the
LCD TV
from the
power
outlet.
READAND
KEEPTHIS
INSTRUCTION
MANUAL FOR LATER USE.
Caution
ln Installing
.
Handle the
LCD TV carefully
when inslalling
it
and do
nol drop.
.
Locate set away
from heat, excessive
dust, and direct
sunlight.
.
For
conect
installation
and mounting
it is
strongly
recommended to use a trained, authorized dealer.
Failure lo follow correc{
mounting
procedures
could result in damage to the equipment and caused to injury
the installer.
NOTE:
When
LCD TV is not used
for a
long
period
of
time, unlighted dots may be observed. This is caused by
characteristic
of the LCD
TV. lf this occurs,
turn the LCD TV on and
leave
it on
about
t hour. These dots will
gradually
disappear.
[n
DOLBY
Manufactured under
license from Dolby
Laboratories.
------oGrAL
l
Dolby' and
the doubleD symbol
are trademarks of Dolby Laboratories.
l{Elml
HDMI, the HDMI
logo and High-Definition
Multimedia Interface
are
trademarks
or
regislered
trademarks
of HDMI Licensing
LLC.
SIDE andTOP
REAR
2
SAFETY
INSTRUCTIONS
A
CAUTION
A
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER
{OR
BACK). NO
USER-
SERVICEABLE
PARTS INSIDE.
REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL
A
rHrs sYMBoL
rNDrcATEs
rHAT DAN-
,/
'
\
GEROUS VOLTAGE CONSTITUTING A RISK
-
or ELECTRIC sHocK
rs
pRESENT
wrrHrN
THIS
UNIT.
^
THIS
SYMBOL INDICATES THAT THERE
il\
ARE rMPoRrANr
oPERATTNG AND
a
MA|I.ITENANCE INsrRUcloNs tN
THE
O\A/NER'S
MANUAL ACCOMPANYING THIS
UNIT.
Read all of the instructions
given
here and retain lhem
for later use. Unplug this LCD TV from AC
power
supply
before cleaning. Do not use liquid or aerosol cleaners.
Use
a damp cloth
for cleaning.
Follow all wamings and instructions marked on lhe
LCD
ry.
For added
protection
to the LCD TV during a lightning
storm, or when it is left unattended and unused
for
long
periods
of time, unplug it from the wall outlet. This will
prevent
damage due to liqhtninq and
power
line surqes.
Do not exoose ihis unil lo rain or use near
waler tor
example, in
a
wel basement,
near a swimming
pool,
eic...
Do nol use attachments not recommended by the
manufacturer as they may cause hazards.
Do not
place
this LCD TV on an unstable cart,stand,
or table. The
LCD W may fall, causing serious injury
to a child or adult, and serious damage
to the LCD
TV-
Use
only
with a cart or stand recommended by the
manutacturer. or sold with the LCD TV.
Wall
or shelf
mounting
should follow lhe manufacturer's instructions,
and should
use a mounting kil approved by the
man ufactu rers.
An appliance and cart combination should
be moved
with care.
Quick
stops,
excessive force, and uneven
surfaces may cause the appliance and cart combinalion
to overtum.
Slots and openings in the back and
bottom of the cabinet
are Drovided for
ventilation. to insure reliable ooeration
of the equipmenl
and to
protect
it from
The openings should never be covered
with cloth or
other
materials, and the bottom opening should not be
blocked
by
placing
the LCD W on a rug, or other similar
surface. This LCD TV
should never
be
placed
near or
over a radiator or heat register
This LCD TV should not be
placed
in a built-in installation
such as a book case unless
orooer
ventilation
is
orovided.
Never
push
objects
of any kind into this LCD TV through
cabinet
slots as they may touch dangerous voltage
points
or short out
parts
that could result in a fire or
electric shock.
Never spill
liquid
of any kind on the LCD
TV.
Do not
place
items such as vases containing
liquid
on
top of the LCD
TV.
Do not install
the LCD TV near the ventilation duct of air-
conditionlng
equipment.
This
LCD TV should be operated
only
from
the type
of
power
source
indicated on
the
marking label. lf
you
are not sure of the
type of
power
supplied, onsult
your
authorized dealer
or local
power
company.
Do nol overload wall
outlels and extension cords as this
can
result in lire or electric shock.
Do not allow anything
to rest on the
oower
cord. Do not locate this LCD TV
where the cord
may be damaged by
persons
walking on
it.
Do not attempt to
service this LCD TV
yourself
as
opening or removing
covers may expose
you
to
dangerous voltage
or other hazards. Refer all servicing
to
qualified
service
personnel-
Unplug
this
LCD TV from
wall outlet and refer servicing
to
qualified
service
personnel
under the following
condition:
a. \Men the
power
cord or
plug
is damaged or
rayed.
b.
lf liquid
has been spilled into
the LCD
ry.
c. lf the LCD TV
has been exDosed to rain or water.
d.
lf
the LCO
TV does not operate normally by following
the operating
instructions. Adjust only those controls
that
are covered
by the operaling instructions as
improper
adjustment of other controls may
result in
damage
and will often require extensive
work
by
a
qualified
technician
to restore the LCD TV to normal
operation.
e. lf the LCD
TV has been dropped or the cabinet has
been damaged.
f. When the LCD
TV exhibits a distinct change in
performance.this
indicates a need for service.
When replacement
parts
are required,
be sure
the
service technician
has used replacement
parts
speci{ied
by the manufacturer
that have
the
same characteristics
as the original
part.
Unauthorized substitutions may
result in fire, elec{ric
shock, or injury to
persons.
Upon completion of
any service or repairs to this LCD
TV, ask the service
technician to
perform
routine safety
checks to
determine that the
LCD TV is
in safe
operating
condilaon.
3
INSTATLING
AND
UNINSTATTING
STAND
BASE
Through
in installing work, handling with
more than two
people
is recommended
.
I
nrougn In rnslailng worK, nanoilng wrln
mofe Inan two
people
ts recommenoed.
.
When holding
(moving
or
lifting) the
LCD Display, hold the
display's body.
Do not handte the
LCD TV by
holding the
attached accessory
parts
(speakers),
olheMise it may result
in
damage.
.
Before installing,
provide
a desk
(or
a
part
of
il) which is
strong
enough to
support the weight of the LCD TV
and this stand. The
desk
must
be larger than the LCD Display
screen
size. The
desk's surface must
be
flat
and maintained with soft material
(such
as a blanket) for
protecting
the screen
surface.
'
Before
putting
the LCD Display
on the desk, make sure there is
no object
on it. Leaving
any object under lhe
screen may cause damage on the
screen.
.
The LCD TV with this
stand should be installed
on
flat
and
level
place.
Do nol
place
on such as
an
non flai,
unlevel or unstable cart or stand. The
display
may fall,
causing nol
only serious
damage to the
products
but
serious injury to a
person.
N
\\$$$#
For
correct inslallation, mounting and
uninstalling of
the
LCD TV Stand,
it is
strongly recommended to
use a
trained,
authorized technician. Failure lo follow
correct
procedures
could result in
damage to the equipment
or
injury to the installer.
Installinq
Stand Base
'l
elace ttre LCD TV screen facing
down on a flat
I
Secure the
stand lo the TV with
4 screws
surface
olace
where maintained with
sofl
malerials
(such
as a blanket) for
protecling
the
display screen.
Uninstallinq the Stand Base
Place
the
LCD TV screen facing
down on a
flatsurface
olace
where
mainlained with
soft
materials
(such
as a
blanket) for
protecting
the
display
screen.
/
Remoue
screws in
4 holes with
screw driver.
4
TABTT
TO
THE OWNER.........................-..............2
sAFETY
TNSTRUCTIONS
........................3
INSTALLING AND
UNINSTALLING
STAND
BASE
.........................................4
FEATURES
AND DESIGN
.........................6
PREPARATTON
...................7
PART NAMES
AND
FUNCTIONS............7
CONNECTING
AC POWER
CORD.........9
CONNECTING
TO AN OUTDOORAERIALg
coNNECTING
LCD
TV ..........................10
CONNECTING
TO A COMPUTER
.,,,.... 1 O
CONNECTING
TO VIDEO
EQUIPMENTll
BEFORE OPERATION
............................'.|
2
REMOTE CONTROL
OPERATION
....,..
1 2
TUNING
THE TV
FOR THE
FIRST TIME
14
SELECTING
INPUT SOURCE
.........,,...
1 9
CHANNEL
SELECT|ON.........................
1 I
CHANNEL
RECA1L...............................
1 9
STEREO/MONO
....................................
1 9
BAS|C
OPERATTON
................................20
Df SPLAY........
................20
voLUM
E CONTROL
.............................
20
EN
ERGY SAVE
MODE..........................
20
srfLL..............
................20
ASPECT
RATf O.............
........................21
DC POWER ON..................
....
.............22
DC POWER
OFF................
...................22
spoRTS
MODE ............
........................22
MUTE.....
.......
................22
CHANNEL
LIST
(
DTV/ATV ONLY
).......23
FAVORITES
GROUP
(
DTV /ATV ONLY
)23
EPG
(DTV
ONLY)
............
......................24
TEXT
/
TV
......................24
TEXT SUBTITLE
(DTV
ONLY)...............25
TEXT CANCEL
..............25
TEXT
fNDEX..
................25
TEXT
REVEAL
...............25
TEXT SUBCODE
(ATV
ONLY)
..............26
TEXT HOLD...
................26
5
FEATURES
AND DESIGN
r Picture
. Feature
.
LCD Panel
1920 x'1080
pixel
Full HD LCD Panel
gives
maximum
reproduction
of 1 080p/1080i HD content in
pixeFto-
pixel. (for
42" HD
panel)
'1366
x 768
pixel
LCD
Panel
gives perfect
reprodudion
of 1080p/1080i
HD content in
pixel-transfer
io
+ixel.
.
Video Enhance Engine
Video Enhance
Engine, SANYO'S High
Quality
lmage
Processing Technology reprocesses
clear,
dynamic,
natural and realistic oicture
with HD/SD LCD Panel
Technology.
.
DynamicAc
The AC
(Auto
Contrast Enhancement)
circuit
compensates
picture
contrast and
brightness
level
dynamically and reproduces
brighl and high-contrast
picture.
(see
page
28)
. Sound
.
NICAM/42 Stereo
Stereo Sound
PAL Color TV Broadcasting System
upgrades Mono-signal
TV to stereo or dual-language
sound.(see
page
33)
"
Bass Boosl
Bass
Boost
gives
a
powerful
bass sound to improve
viewing
experience.
(see
page
34)
.
Virtual Sunound
Virtual Sunound
gives
a
powerful
suround sound to
improve viewing
experience.
(see
page
34)
o
Feature
SPORTS
Wth the
pre6s
of
a button,
sporls mode optimizes
piclure
and audio settings for diferent types
of sports
programs.
(see
page
22)
r FOOTBALL
Pre-sets for
Football.
Golf
etc.
r WINTER
Pre-sets for Skiing, lce Skating
etc.
r MARINESPORTS
Pre-sets
for
Swimming,
Diving etc.
r INDOORSPORTS
Pre-sets for
Basketball, Boxing
program
etc.
.
Light Sensor
Ambient light sensor automatically adjusts
picture
brightness to
protect your
eyes.
..
Sompalip-jfty--
.
Full Multi
System
PAL, SECAM, NTSC, NTSC 4.43 systems can be
connected.
"
HD-Ready
1080p, 1080i, 720e
High Definition
signals are
receivable.
.
HDMI
HDMI
provides
complete transmission of digital image
and audio signals
without any
quality
deterioration.
DVI can be connec{ed to HDMI.
.
PC Inout
Personal Computerftaptop can be connecled
with automatic resolution adjustment.
.
Terminals
HDMI for BluRay
Player etc.
O
-SUB
1 s-pin for PC input etc.
Component
Video
for DVD
S-VideoMdeo for VCR /DVD
rPlher--*"----*-
Wall Mounting
Designed for VESA
Standard
w"ll hanging bracket.
Light Commercial Mode
By entering Dealer
mode, Volume Lock, Start
Mode,
OSD,
RC,
Reset, AC Power Mode can
be selecled.
Convenient
for
placing
in hotels, hospitals,
schools, s
tores.
banks eic.
6
PREPARATION
ffirc
ffiW
CARING FOR YOUR LCD
TV
.
Do not bump or scratch
the
panel
surface as
this causes flaws on the surface
of the screen.
.
There may be some tiny
black spots and/or
blight spots on the
SCREEN. This is normal.
7
PRE
PARATION
S|D{{rcffifiFffi\
(a""n
ounon on the control
panel
has the same
function as its
counterparl on the remote @ntrol.)
Used
to tum the LCD TV
ON
or OFF.
Used to adjust the volume.
Used
to adjust the value of a selected
ilem on On-Screen Menu.
Used to execule a seleted menu
item
on
On-Screen menu.
Open or Close the On-Screen Men-
Used
to
select
inpul
source:Dry
Video 1,
Video 2, Video
3,
HDMI 1, HDMI 2, HDMI
3. PC,ATV.
For connection of headphones
(stereo)
Intemal soeaker sound will be cut off.
For connection of video
and audio outDuts
from
digital video
equipment DVD unit
(RCA
type)
Audio Land R
(RCAtype)
Connecl a lelevision, video recorder
or extemal
audio amDlifier to these
iacks.
.
Video
(RCA
type)
.
Audio L and R
(RCA
type)
Connecl
video and audio output from
digital
video
equipment.
.
DVD unit
(RCAtype)
.
Audio L and R
(RCAtype)
Connect all kinds of HOMI output equipment
io
this terminal.
.
HDMI Cable
Connect
computer outputs
to these lerminals
.
RGB
(D-SUB)
Service terminal
Connec{
video and
audio
output from digital
video equipment.
.
Video
(RCA
type)
.
Audio L and R
(RCA
type)
.
S-Video
(mini
Din 4 type)
8
CONNECTING
LCD TV
This LCD TV uses normal inpul
voltages
of
100-240V
AC. ll will automatically select the
conect input vollage
and
is
designed to
work with single-phase
power
systems. To reduce risk of elec{rical shock do not
plug
unit into any other type of
power
system. Consult
your
authorized dealer or service
personnel
if
you
are not
sure of the type of
power
being supplied.
Connect the LCD
TV
to all
peripheral
equipment before
turning it on.
A
"ounon
For safety reasons, unplug
the AC
power
cord when
the
LCD
TV is not in
use.
Cable required for connection:
.
Aerial Cable
(not
supplied with
the LCD
TV)
NOTE:
For all aerial
problems, please
mnsult
your
local
dealer.
AC POWER
CORD
The
AC outlet
should be near to the unit
and must be
easily accessible.
I
CONNECTING
LCD TV
Cables required
for
connection:
.
PCA/GACable
(D-SUB
15
pin)
.
HDMI Cable
.
Mac Adapter
(for
connection to Macintosh computers)
.
Audio Cable
[Mini
Plug
(UR)]
HDM|output
ffi'ff
,
*.j,
Audio
Output
(stereo)
NOTE:
.
You can
connect
a
DVI source to HDMI 1 input terminal by using a DVI to HDMI
converter; however audio
will
be lost.
.
The
"PC Audio Input' terminal can supported the audio input for the PC and HDMI Input
1.
A
/.\
NOTE:
When
connecting the cable,
AC Power
Cords of
both
LCD TV and external
equipment should be disc,onnected
from
AC
outlet. Turn LCD TV and
peripheral
equipment
on before
your
computer is
switched on.
DesKop Type
ilHMtl
L:I
ffi
@
Laplop Type
tl]M$l
t0
CONNECTING LCD TV
Cables used
for connection
(these
cables are not supplied
with
this
LCD W.)
.
Video Cable
(RCA
X 1), S-Video Cable,
Audio Cable
(RCA
)(2) :
Video
1 or Video 2
.
Video Cable
(RCA
X3), Audio Cable
(RCA
X 2) : DVD
(Component
Video)
.
Video Cable
(RCA
X
1), Audio Cable
(RCA
X2)
: Monitor Outputs
.
HDMI Cable:
HDMI Input
NOTE : When connected
the cable, AC Power Cords
of both LCD TV
and external equipment
should be
disconnected
from
AC outlet.
HDMI Output
Composite
Video and
Audio Output
DVD video equipmenl
(RCAx3)
Audio €ble
(RcA
x2)
@
Note:
Video
(RCA)
output is supported
for TV and DTV.
ff
Video €ble
(RCAx1)
4s'rL*
*#-€
Audio €ble
(RCA
x2)
ll
BEFORE
OPERATION
Note: In
different modes, some buttons will have
different
functions.
12
BEFORE
OPERATION
Point Remote
Control towards LCD
TV
(lnfrared
Remote Receiver)
when
pressing
buttons. Maximum
operating range
for the Remote Control
is about 5
metres to the
front, about
30"
to the
left
or
the right,
15"
and about 15"
above or below
the unit.
15;
W
ffi
Remove
ttre
battery compartment cover
In""rt
trro Ann size
batteries
(1.5V)
according to
"+"
and
"-"
polarity
symbols.
ffi
ctose tne battery
compartment cover
To
ensure
safe operation,
please
observe the following
precautions:
.
Use alkaline batteries.
.
ReDlace
both batteries at the sametime.
.
Do not use a
new battery with a used battery.
.
Avoid contacting
with water or
liquids.
.
Do nol droo
the Remote
Control.
.
lf
a
battery has leaked
inside the Remote Control, carefully wipe
case clean and
install new batteries.
.
There is a
risk of explosion if batteries are
replaced
by
incorrect
types.
13
BEFORE
OPERATION
I
The screen
at right will
appear the first time the
TV is switcheo on
and
each
time
the TV is reset.
I
The firsl
step is to
set up
"Energy
Save Mode".
J
Press <or >
button on Remote
Control to
select
the
'standard/
Energy
Save"
or
"Store/Dynamic"
mode
in
"Energy
Save Mode"
menu.
{
eress 'OK"
button to
set
"Energy
Save Mode"
and start ATV/DTV
Scan.
The Auto Scan
screen will appear
and the TV will automatically
start to search
for available
stations. The
progress
bar will
pan
accordingly.
J
Wnen
DTV search is
completed, the TV will
automatically tum to
the
lowest
logical
channel number.
Notes:
.
To ensure
your
lelevision is
operating at
optimal energy efiiciency,
select
"Standard/Energy
Save" mode
during initial activation.
"Standard/Energy
Save" mode is recommended
for normal
home
use.
.
Energy
Saving Mode: The factory
default setling
of this television
meets
ENERGY
SAVING requirements.
Changing
picture
settings
may increase
energy
consumption,
possibly
beyond the limits
required for
the ENERGY
SAVING
qualitication.
NO SIGNAL
SHUT OFF
This LCD
ry set incorporates
a
"NO
SIGNAL
SHUT OFF" function.
lf there
is no signal input,
a
"No
Signal" message will display
for about
15 minutes and the
LCD TV will
automatically
power
off.
Energy
Save
Mode
ATV
Auto
Scan
DTV Auto
Scan
14
BEFORE OPERATION
DTV MODE
MENU
t5
BEFORE
OPERATION
VIDEO 1/2/3
and
PC MODE MENU
Note: VGA
Set only for PC ll,lode.
t6
BEFORE OPERATION
HDMI
1/2/3
MODE MENU
17
BEFORE
OPERATION
ATV
MODE
MENU
IB
BASIC
OPERATION
Select input
source
by
pressing
"INPUT"
button on Remote
Control
/ Side
Controls.
This
LCD TV
can display
a number
of source
types.
For
direct access
to
programs
using
the
(0-9)
number buttons:
1
)
For
selection
of
channel
positions
from
0-9.
e.g.: For
channel
position
g,
press
the
g
button
on
the
Remote
Control.
2) For
selection
of
channel
positions
from
10-99.
e.g.: For
channel
position
25,
press
the NUMBER
buttons
to
display channel,
then
press
2
and S
buttons on Remote
Control.
Press
CH
+/-
buttons
to select
DTV/ATV
channel
1
)
Press
CH
+
button
to select next
channel.
2) Press
CH
-
button to
select
previous
channel.
Press
PiaP
button
on the Remote
Control
to switch
between
current
channel
and
previous
channel.
For
example,
if
you
are watching
channel
4,
but
you
were
watching
channel
2
previously:
Press the
P*P
button, Channel
2 will appear
immediately.
1
).
"Stereo",
'Mono",
"Dual
1
",
and
"Dual
2".
2).
"1
English
(
PCM
)",
and
"2
English
(AC3
)'.
(
OnlyforW
)
(
Onlyfor
DW
)
lf
the input
source
doesn't
have audio
signal
function,
this bufton
is
invalid.
Press
vA/B
bufton
on the Remote
control
to select
the following
audio
signals
sequentially:
t9
BASIC OPERATION
Press
the INFO button on the
Remote Control to display
LCD W.status
1280 x768
(60H2)
Adjust
the volume by
pressing
VOL
+/-
buttons on the Remote
Control / Side Controls.
The volume dialogue box
will
appear
on lhe screen
for a short time,
Press
the
VOL
+
button to increase
volume, and
the VOL
-
bulton to decrease volume.
This function is used to
limit maximum brightness
for energy saving.
Press ENERGY SAVE
bufton on the
Remote Control to set
ihis function
as
'OFF", "Energy
Save
1",
"Energy
Save
2", and'Energy Save 3".
Note:
.
The
"Light
Sensor" and
"Manual
Backlight Setting" function are
invalidated when
the
"Energy
Save
Mode"
function
is'turned on.
Press STILL bufton on the
Remote Control to switch
the still function On/Off. The still function freezes the
main Dicture.
Note:
.
When the stillfunction is
On, the
picture
will be
frozen, but audio will continue.
.
This function
doesn'tworkwhen the input signal
is 1080p.
20
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/