TM
Dimensions
400mm (15
3
/
4”
645mm (25
3
/8”)
455mm
(17
7
/8”)
42mm
(1
5
/8”)
18mm
(
3
/4”)
5 Holes at
125mm (4
7
/8”)
Intervals
775mm
(30
1
/2”)
102mm
(4”)
325mm
(12
7
/8”)
385mm
(15
3
/16”)
Minimum Footprint
142mm
(5
5
/8”)
The minimum Footprint of the DISPLAY FREESTANDING QUAD is determined by the width of your monitors. The minimum overall width
has been calculated using 15” Monitors.
NOTE: This product has been designed to mount 15” - 21” monitors.
Typical configuration for 15” Monitors
Minimum overall width
ADJUSTABLE
ADJUSTABLE
Technical Specifications
SPACEDEC
DISPLAY FREESTANDING QUAD
Donut 42 Dimensions
90mm (3
1
/2”)
Plus or
Minus 40
Rotation
from
centre
42mm
(1
5
/8”)
147mm (5
3
/4”)
102mm (4”)
Maximum Load: 11.5 kgs (25 lbs)
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 16.08.05
c
Maximum overall width 972mm (38
3
/8”)
287mm (11
1
/4”)
560mm (22”)
473mm (18
5
/8”)
458mm
(18”)
Maximum Footprint
The maximum Footprint of the DISPLAY FREESTANDING QUAD allows for Monitors measuring up to 21”.
Typical configuration for 21” Monitors
35mm
(1
3
/8”)
Plus or
Minus 40
Rotation
from
centre
/