Bye Bye Standby BBSLP-EP User manual

Brand
Bye Bye Standby
Model
BBSLP-EP
Type
User manual

This manual is also suitable for

Bye Bye Standby BBSLP-EP is a remote-controlled electrical socket that allows you to turn on and off devices plugged into it, remotely. It's a great way to save energy by putting devices into standby mode when not in use, or to control devices that are difficult to reach. The socket is easy to set up and use, and can be controlled by multiple remotes. It's also safe to use, with built-in overload protection.

Here are some of the features and possible use cases of the Bye Bye Standby BBSLP-EP:

  • Turn on and off devices remotely, from up to 30 meters away.
  • Put devices into standby mode to save energy.

Bye Bye Standby BBSLP-EP is a remote-controlled electrical socket that allows you to turn on and off devices plugged into it, remotely. It's a great way to save energy by putting devices into standby mode when not in use, or to control devices that are difficult to reach. The socket is easy to set up and use, and can be controlled by multiple remotes. It's also safe to use, with built-in overload protection.

Here are some of the features and possible use cases of the Bye Bye Standby BBSLP-EP:

  • Turn on and off devices remotely, from up to 30 meters away.
  • Put devices into standby mode to save energy.
Set-up
1. Insert your Bye Bye Standby socket into an electrical mains socket.
2. Each socket must be set-up with a remote before it can be used. To set-up your socket with your remote control press and
hold the OFF buon on the socket. The LED on the socket will flash once every second indicang that it is ready to be set-up.
3. Choose one pair of buons on your remote control to control your socket. Press and hold the green ON buon on your
remote control, the LED will flash rapidly and then remain on, this indicates that your socket is ready to be used.
Bye Bye Standby is a trading name of Enisc Ltd
10 Wornal Park, Worminghall Bucks, HP18 9PH
www.enisc.com
For further informaon on the Bye Bye Standby
range of energy saving products, please visit
www.ByeByeStandby.co.uk
Technical Specificaons
Voltage: 240VAC/50Hz
Rang: Max 13A/3000W
On/Off Indicaon: LED
Range: <30M
Baery Type: 12VDC/MN21
Important
For indoor use only. Keep away from
all sources of water and moisture. Do
not overload. Adult Installaon only.
Use only as directed. Always check
waage load and do not exceed the
electrical devices specificaon
1
2
3
To Use
Before you can use your socket, you must set it up. See overleaf for details.
4. To use, plug the device that you would like to control into your Bye Bye Standby socket and press the green buon to
acvate standby mode and the red buon to take your appliance off standby.
5. If you press the ALL ON buon on your remote control all your sockets will be turned on, if you press the All Off Buon all
of your sockets will be turned off.
Reseng The Socket
1. Ensure your Bye Bye Standby socket is turned off, hold down the off buon on your remote control for three seconds.
2. Hold down the ALL OFF buon on the remote control unl the LED on the socket flashes rapidly and then once every
second.
Tips
To control your Bye Bye Standby socket with an addional remote control:
1. Each socket can be controlled by more than one remote control, including remote controls from the Bye Bye Stadnby classic
range.
2. To use your new Bye Bye Standby socket with a Bye Bye Standby classic remote control simply follow the set-up instrucons
overleaf using A1 on your Bye Bye Standby classic remote control or any other code you wish to set.
Troubleshoong
If your socket doesn’t respond to the remote control:
1. The baery in your remote control may have lost charge, consider changing the baery.
2. The socket and remote are too far apart, move closer to the socket.
45
  • Page 1 1
  • Page 2 2

Bye Bye Standby BBSLP-EP User manual

Brand
Bye Bye Standby
Model
BBSLP-EP
Type
User manual
This manual is also suitable for

Bye Bye Standby BBSLP-EP is a remote-controlled electrical socket that allows you to turn on and off devices plugged into it, remotely. It's a great way to save energy by putting devices into standby mode when not in use, or to control devices that are difficult to reach. The socket is easy to set up and use, and can be controlled by multiple remotes. It's also safe to use, with built-in overload protection.

Here are some of the features and possible use cases of the Bye Bye Standby BBSLP-EP:

  • Turn on and off devices remotely, from up to 30 meters away.
  • Put devices into standby mode to save energy.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents