Safavieh MCR6001A-SET2 Installation guide

Type
Installation guide
Model# MCR6001A
Product Dimensions:18.5" W x 19.8" D x 34" H
PIECE QUANTITY
A 1X
B 1X
C 1X
D 1X
E 1X
F 1X
1 6X
2 3X
3 4X
4 7X
5 3X
6 2X
7 6X
8 6X
9 1X
JCBC BOLT M6 X 50MM
ALLEN KEY
FLAT WASHER
SCREW PIN
CSK CB SCREW
WOOD DOWEL
BEND WASHER
CHAIR SEAT
JCBC BOLT M6 X 30MM
PICTURE
CHAIR BACK
SPRING WASHER
BACK LEG SET
SIDE RAIL (LEFT)
SIDE RAIL (RIGHT)
FRONT LEG SET
CARE AND MAINTENANCE
Spot clean using a mild water-free solvent. Only a professional cleaner should undertake
a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this
item
* This item should be assembled on a soft surface to prevent scratching the finish during
assembly
* This item may require periodic tightening
Part List and Hardware List
DESCRIPTION
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
1 2 3
  • Page 1 1
  • Page 2 2

Safavieh MCR6001A-SET2 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI