Edelbrock 5654 (Stainless Steel) User manual

Type
User manual

This manual is also suitable for

Edelbrock 5654 (Stainless Steel) is an axle-back exhaust system designed for 2005-2008 Ford Mustang GTs with 4.6L V8 engines. This system is made of stainless steel for durability and corrosion resistance. It includes two mufflers, two band clamps, and all necessary hardware for installation. The Edelbrock 5654 is designed to improve exhaust flow and sound, giving your Mustang a more aggressive and throaty exhaust note. It is also easy to install, with no cutting or welding required.

Edelbrock 5654 (Stainless Steel) is an axle-back exhaust system designed for 2005-2008 Ford Mustang GTs with 4.6L V8 engines. This system is made of stainless steel for durability and corrosion resistance. It includes two mufflers, two band clamps, and all necessary hardware for installation. The Edelbrock 5654 is designed to improve exhaust flow and sound, giving your Mustang a more aggressive and throaty exhaust note. It is also easy to install, with no cutting or welding required.

©2007 Edelbrock Corporation
Catalog #5644, #5654
Brochure #63-0494
Rev. 9/07- DA/mc
EDELBROCK AXLE-BACK EXHAUST SYSTEMS
For 2005-2008 Ford Mustang GT with 4.6L V8
Catalog #5644 (Aluminized), #5654 (Stainless Steel)
INSTALLATION INSTRUCTIONS
®
Please study these instructions carefully before installing your new Axle-Back Exhaust System. If you have any questions,
please contact our Technical Hotline at: 1-800-416-8628, 7:00 am to 5:00 pm, Monday through Friday, Pacific
Standard Time or e-mail us at [email protected]
.
Edelbrock Corporation , 2700 California Street, Torrance, CA 90503
Toll-Free Tech Line: 1-800-416-8628
Office: 310-781-2222
Tech E-Mail: [email protected]
DISASSEMBLY
1. Raise rear of vehicle on flat stable surface and
support using jackstands.
2. Use penetrating oil on OE clamps that hold
mufflers to overaxle pipe. Loosen clamps,
remove the stock muffler isolator brackets from
frame and remove the stock muffler from
vehicle.
WARNING!!!
Exhaust gas contains carbon monoxide, a deadly invisible gas. Correct any leaks before driving.
Suggested tools needed for installation:
13mm & 15mm deep sockets and ratchet
Floor jack & jackstands
Penetrating oil
IMPORTANT NOTE:
Proper installation is the responsibility of the installer. Improper installation will void warranty and may
result in poor performance and engine or vehicle damage.
ASSEMBLY
1. Install muffler assembly number #25-3233 on
driver’s side of vehicle using supplied band
clamps and the stock muffler isolators and
brackets removed in step 2 of disassembly.
2. Install muffler assembly #25-3234 on
passenger’s side of vehicle in the same manner
as left muffler.
NOTE: The I-pipe /overaxle pipes can be
adjusted to obtain better clearance, if needed.
Qty. Part # Description
1
25-3233 Muffler Assembly (Left Side)
1
25-3234 Muffler Assembly (Right Side)
#5644 Parts List
Qty. Part # Description
1 25-3243 Muffler Assembly (Left Side)
1 25-3244 Muffler Assembly (Right Side)
#5654 Parts List
  • Page 1 1

Edelbrock 5654 (Stainless Steel) User manual

Type
User manual
This manual is also suitable for

Edelbrock 5654 (Stainless Steel) is an axle-back exhaust system designed for 2005-2008 Ford Mustang GTs with 4.6L V8 engines. This system is made of stainless steel for durability and corrosion resistance. It includes two mufflers, two band clamps, and all necessary hardware for installation. The Edelbrock 5654 is designed to improve exhaust flow and sound, giving your Mustang a more aggressive and throaty exhaust note. It is also easy to install, with no cutting or welding required.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI