Haier FTM140GG User manual

Type
User manual

This manual is also suitable for

User Manual-
Model #
FTM140GG
Electric Tower Fan
Manual del Usuario-
Modelo #
Ventilador Eléctrico Mini
Torre
1
English
IMPORTANT SAFEGUARDS
When using this appliance, always exercise basic safety
precautions, including the following:
WARNING: To Reduce The Risk Of Fire Or Electrical Hazard, Do Not Use This Fan
With Any Solid-State Speed Control Device.
WARNING: To Reduce The Risk Of Electric Shock And Injury To Persons, Do Not
Use This Box Fan in A Window.
READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT.
• This product is intended for general use in cooling room temperature.
• Do not use the product for any purpose other than its intended use.
• Never insert fingers or any other object through the Fan Guards. Never drop or
insert objects into any opening of the product.
• Do not place this Fan in or near an open window. Rain, snow, and other weather
elements may create an electrical hazard.
Always operate the product on a flat, steady, and stable surface to avoid it
overturning.
• Keep the product out of the reach of children and pets. This product is not
intended for use by children.
• Do not leave the product unattended while in use, especially when children are
present.
• Unplug Fan from wall outlet when not in use or moving to another location or for
cleaning.
• Always operate the Fan on a flat, steady, and stable surface to avoid it
overturning.
• Keep Power Cord and product away from open flame, cooking or heated surfaces.
Do not operate Fan near or in the presence of explosive or flammable fumes or
materials.
Never operate the Fan without Guards in place, as serious personal injury may
result.
Do not allow the Power Cord to hang (i.e., over the edge of a table or counter)
where it may be tripped over or pulled.
Do not operate the product if the Power Cord is cut, damaged, or if the wires are
exposed.
Always unplug the product from the electrical outlet when cleaning it. Do not
plug/unplug the product into/from the electrical outlet with a wet hand.
• To disconnect, grasp the plug and pull from wall outlet, never pull the Power Cord.
Do not operate Fan with damaged Cord or Plug, after malfunctions, or dropped, or
damaged in any matter. This product has no user-serviceable parts. Do not attempt
to examine or repair this product yourself. Return the product to a service center for
examination and repair.
English
2
Assembly Instructions
• Do not attempt to open any part of the Motor Housing.
Do not immerse the Motor Housing, Cord, or Plug in, or expose them to, water or
other liquids.
• Do not use outdoors, this product is intended for indoor use only.
This product is intended for HOUSEHOLD USE ONLY and not for commercial or
industrial use.
READ AND SAVE THESE INSTRUCTIONS
CAUTION: This product is equipped with a polarized plug (one blade is wider
than the other blade) as a safety feature to reduce the risk of electrical
shock. This plug will fit into a polarized outlet only one way. This is a
safety feature. If you are unable to insert the plug into the electrical
outlet, try reversing the plug. Do not alter the plug. Do not attempt to
defeat the safety purpose of the polarized plug.
CAUTION: If using an extension cord with this product, the marked electrical
rating of the cord set or extension cord should be at least as great as
the electrical rating of the product. Never use the plug with anextension
cord unless the plug can be fully inserted into the extension cord.
1. Remove all contents from the box, being careful not to discard the manual and
hardware needed for assembly.
2. Pass the power cord through the channel of the stand, and firmly clasp the two
halves of the stand together. Insert the base into the bottom of the housing being
careful to align the corresponding holes.
3. Gently turn the fan upside down, with the top of the fan touching the floor. Screw
the stand into the bottom portion of the fan housing (fig. 1), by using the 2 thumb
screws that come with the fan. Screw the stand with the bases by 4 screws (fig. 2)
and finally, fix the bases by the rest of the screws (fig. 2).
4. To reduce movement of the power cord during use or transportation, place the
power cord through the cut out on the bottom of the base (fig. 3).
5. Place the fan right side up and it is ready to use.
A. Screws x 4 (stand with housing)
B. Screws x 4 (stand with bases)
C. Screws x 4 (bases)
D. Top Cover
E. Oscillating Button
F. Speed Control
G. Fan Housing
H. Front Grill
I. Stand
J. Base
K. Timer
3
English
Operation Instructions
1. Set the fan base on a dry, level surface.
2. Plug the cord into any standard 120-volt AC outlet. To turn the fan on press one
of the three speed buttons marked (1) low, (2) medium, or (3) high. To turn the
fan off press the button marked with (0) off.
3. The SPEED is adjusted by pressing one of the three buttons for your desired level
of cooling comfort.
4. The OSCILLATION button is located on the top of the fan control panel. To start
oscillation, push the button again.
5. The timer can be set to switch the fan off at any point from 120 minutes or less.
To use the fan without the timer feature set the timer knob to ON. If the timer
knob is set at OFF, the fa will not work even when the speed buttons are pressed.
Follow these instructions to correctly and safely care for your Mini Tower Fan. Please
remember:
• Always unplug the fan before cleaning or disassembling.
• Do not allow water to drip on or into the fan motor housing.
• Do not use any of the following as a cleaner; gasoline,
thinner or benzine.
• We also recommend the periodic cleaning of this fan by lightly running
a vacuum cleaner nozzle over the fan grill to remove any dust or dirt
that may have accumulated inside or on the unit.
This item is warranted to be free from defects in materials or workmanship for a
period of five (5) years from the original date of purchase under normal household
use. Within the warranty period, we will either repair or replace the product at our
option.
This warranty extends only to the original retail purchaser, and excludes any
damage to the product resulting from accident or misuse. The product is not
warranted when used in a commercial or business environment.
The above warranty is complete and exclusive. The warrantor expressly disclaims
liability for any special, incidental, indirect, or consequential damages in connection
with the purchase or use of this product or costs over the original purchase price.
Any implied warranties arising by operation of law shall be limited in duration to
the terms of this warranty.
This warranty gives you specific legal rights and you may have other rights which
vary by jurisdiction.
Haier America Trading
New York, NY 10018
4
English
Using a soft, moist cloth, with or without a mild soap solution, carefully clean the
fan housing. Please use caution around the grills. Do not allow the motor or other
electrical components to be exposed to water.
Fan Head and Base Cleaning
Cleaning/Maintenance Instructions
Limited Warranty
Made in China
Hecho en China
Haier America
New York, NY 10018
Printed in China
Issued: October-03
IMPORTANT
Do Not Return This Product To The Store
If you have a problem with this product, please contact the "Haier Customer
Satisfaction Center" at 1-877-337-3639.
DATED PROOF OF PURCHASE REQUIRED FOR WARRANTY SERVICE
IMPORTANTE
No Devuelva Este Producto al Establecimiento Compra.
Si tiene problemas con este producto, por favor póngase en contacto con el "Centro
Haier de Atención al Cliente" en el 1-877-337-3639.
PARA EL SERVICIO DE GARANTÍA SE REQUIERE PRUEBA DE COMPRA, FECHADA, No. DE
MODELO Y No. DE SERIE
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Haier FTM140GG User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI