Dacor DMW2420S Installation guide
- Category
- Warming drawers
- Type
- Installation guide
Dacor DMW2420S is a versatile microwave oven that offers various features for convenient and efficient food preparation. With its sleek design and user-friendly interface, it seamlessly integrates into any kitchen. The microwave's 10 power levels provide precise control for different cooking needs, from defrosting to reheating and cooking. Additionally, it features a sensor cooking option that automatically adjusts the cooking time and power level for optimal results.
Dacor DMW2420S is a versatile microwave oven that offers various features for convenient and efficient food preparation. With its sleek design and user-friendly interface, it seamlessly integrates into any kitchen. The microwave's 10 power levels provide precise control for different cooking needs, from defrosting to reheating and cooking. Additionally, it features a sensor cooking option that automatically adjusts the cooking time and power level for optimal results.
All specications subject to change without notice.
Phone: (800) 793-0093www.dacor.com
PLANNING
GUIDE
COMBINATION INSTALLATIONS
Microwave/EO, MOH or MOV Wall Oven
/Warming Drawer
Document # PGCI-018
Revised 12/07/11 Page 1/1
CUTOUT DIMENSIONS
DMT2420/DMW2420 SHOWN
CUTOUT DIMENSIONS
DCM24 SHOWN
Wall Oven Models (B) Cutout Width
Single 27” 25 1/2” (64.8 cm)
Single 30” 28 1/2” (72.4 cm)
Microwave Model No. (A) Cutout Width
DMT2420 or DMW2420 w/AOMTK series trim kit 24 3/8” (61.9 cm)
DCM24 w/AOCTK27 trim kit 25 1/4” (64.1 cm)
DCM24 w/AOCTK30 trim kit 25 1/4” (64.1 cm)
Warming Drawer Models (C) Cutout Width
27” 25 1/2” (64.8 cm)
30” 28 1/2” (72.4 cm)
NOTE:
1. 3/4” (1.9 cm) support platform (flush with cutout).
2. See individual appliance Planning Guide pages to
determine overlays.
3. Spacing between appliances and drawers/doors shown
is minimum required to allow for ventilation and prevent
scraping. Additional space may need to be added for
appearance.
4. Warming drawer model OWD24 is not approved for
installation above, below or adjacent to a wall oven or
another warming drawer (any type).
9 1/8”
(23.2 cm)
27 1/2”
(69.9 cm)
16 3/4”
(42.5 cm)
1 1/2” min.
(3.8 cm)
2 1/4” min.
(5.7 cm)
B
C
A
1
1
7/8” min. (2.2 cm)
3/4” min.
(1.9 cm)
58 3/4”
min.
(149.2 cm)
overall
stacked
height
120 Vac electrical
outlet for microwave
120 Vac electrical
drawer
240 Vac
wall oven
junction box
outlet for warming
1
1
9 1/8"
(23.2 cm)
27 1/2"
(69.9 cm)
18 1/2”
(47.0 cm)
1 3/4" min.
(4.4 cm)
2 1/4" min.
(5.7 cm)
B
A
1
1
7/8" min. (2.2 cm)
3/4" min.
(1.9 cm)
60 3/4"
min.
(154.3 cm)
overall
stacked
height
C
120 Vac electrical
outlet for microwave
120 Vac electrical
drawer
240 Vac
wall oven
junction box
outlet for warming
1
All tolerances: +1/16” (+1.6 mm), -0, unless otherwise stated
WARNING
• Observe all governing codes and ordinances during
planning and installation. Contact your local building
department for further information.
• All appliances must be installed in accordance with the
accompanying installation instructions.
All specications subject to change without notice.
Phone: (800) 793-0093www.dacor.com
PLANNING
GUIDE
COMBINATION INSTALLATIONS
Microwave/RNO Wall Oven/
Warming Drawer
Document # PGCI-037
Revised 02/04/15 Page 1/1
CUTOUT DIMENSIONS
DMW2420 SHOWN (ADMWTK TRIM KIT)
CUTOUT DIMENSIONS
DCM24 SHOWN (ADCMTK TRIM KIT)
Wall Oven Models (B) Cutout Width
Single 27” 25 1/2” (64.8 cm)
Single 30” 28 1/2” (72.4 cm)
Microwave Trim Kit (A) Cutout Width
ADCMTK27 25 3/4” (65.4 cm)
ADCMTK30 28 1/4” (71.8 cm)
ADMWTK27 25 3/4” (65.4 cm)
ADMWTK30 28 1/4” (71.8 cm)
Warming Drawer Models (C) Cutout Width
27” 25 1/2” (64.8 cm)
30”
28 1/2” (72.4 cm)
NOTE:
1. 3/4” (1.9 cm) support platform (flush with cutout).
2. See individual appliance Planning Guide pages to
determine overlays.
3. Spacing between appliances and drawers/doors shown
is minimum required to allow for ventilation and prevent
scraping. Additional space may need to be added for
appearance.
4. Warming drawer model OWD24 is not approved for
installation above, below or adjacent to a wall oven or
another warming drawer (any type).
9 1/8”
(23.2 cm)
27 1/2”
(69.9 cm)
16 3/4”
(42.5 cm)
7/8”
(2.2 cm)
min.
1 1/2”
(3.8 cm)
min.
B
C
A
120 Vac electrical
outlet for microwave
120 Vac electrical
drawer
240 Vac
wall oven
junction box
1
1
1
5/8” min. (1.6 cm)
3/4”
(1.9 cm)
min.
57 1/8”
min.
(145.1 cm)
overall
stacked
height
outlet for warming
9 1/8"
(23.2 cm)
27 1/2"
(69.9 cm)
1" min.
(2.5 cm)
1 1/2" min.
(3.8 cm)
B
A
1
1
1
3/4" min. (1.9 cm)
3/4" min.
(1.9 cm)
59 3/4"
min.
(151.8 cm)
overall
stacked
height
C
19 1/8"
(48.6 cm)
120 Vac electrical
outlet for microwave
120 Vac electrical
drawer
240 Vac
wall oven
junction box
outlet for warming
All tolerances: ±1/16” (±1.6 mm), unless otherwise stated.
WARNING
• Observe all governing codes and ordinances during
planning and installation. Contact your local building
department for further information.
• All appliances must be installed in accordance with the
accompanying installation instructions.
All specications subject to change without notice.
Phone: (800) 793-0093www.dacor.com
PLANNING
GUIDE
COMBINATION INSTALLATIONS
DMT2420 or DMW2420 Microwave/
DTO Wall Oven/Warming Drawer
Document # PGCI-036
Revised 02/04/15 Page 1/1
CUTOUT DIMENSIONS
WITH ADMWTK MICROWAVE TRIM KIT
CUTOUT DIMENSIONS
WITH AOMTK MICROWAVE TRIM KIT
Wall Oven Models (B) Cutout Width
Single 27” 25 1/2” (64.8 cm)
Single 30” 28 1/2” (72.4 cm)
DMT2420 or DMW2420 Microwave Trim Kit (A) Cutout Width
ADMWTK271* 25 3/4” (65.4 cm)
ADMWTK301* 28 1/4” (71.8 cm)
AOMTK27 24 3/8” (61.9 cm)
AOMTK30 25 1/4” (64.1 cm)
* Available only in stainless steel. Matches DMW2420 only.
Warming Drawer Models (C) Cutout Width
27” 25 1/2” (64.8 cm)
30”
28 1/2” (72.4 cm)
NOTE:
1. 3/4” (1.9 cm) support platform (flush with cutout).
2. See individual appliance Planning Guide pages to
determine overlays.
3. Spacing between appliances and drawers/doors shown
is minimum required to allow for ventilation and prevent
scraping. Additional space may need to be added for
appearance.
4. Warming drawer model OWD24 is not approved for
installation above, below or adjacent to a wall oven or
another warming drawer (any type).
9 1/8”
(23.2 cm)
27”
(68.6 cm)
16 3/4”
(42.5 cm)
1 3/8”
(3.5 cm)
min.
1 1/2”
(3.8 cm)
min.
B
C
A
120 Vac electrical
outlet for microwave
120 Vac electrical
drawer
240 Vac
wall oven
junction box
1
1
1
5/8” min. (1.6 cm)
3/4”
(1.9 cm)
min.
57 1/8”
min.
(145.1 cm)
overall
stacked
height
outlet for warming
9 1/8”
(23.2 cm)
27”
(68.6 cm)
16 3/4”
(42.5 cm)
1 5/8”
(4.1 cm)
min.
1 1/2”
(3.8 cm)
min.
B
C
A
120 Vac electrical
outlet for microwave
120 Vac electrical
drawer
240 Vac
wall oven
junction box
1
1
1
7/8” min. (2.2 cm)
3/4”
(1.9 cm)
min.
57 5/8”
min.
(146.4 cm)
overall
stacked
height
outlet for warming
All tolerances: ±1/16” (±1.6 mm), unless otherwise stated.
WARNING
• Observe all governing codes and ordinances during
planning and installation. Contact your local building
department for further information.
• All appliances must be installed in accordance with the
accompanying installation instructions.
-
1
-
2
-
3
Dacor DMW2420S Installation guide
- Category
- Warming drawers
- Type
- Installation guide
Dacor DMW2420S is a versatile microwave oven that offers various features for convenient and efficient food preparation. With its sleek design and user-friendly interface, it seamlessly integrates into any kitchen. The microwave's 10 power levels provide precise control for different cooking needs, from defrosting to reheating and cooking. Additionally, it features a sensor cooking option that automatically adjusts the cooking time and power level for optimal results.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Dacor EWD24SCH Combined Configuration Microwave - Warming Drawer - Renaissance Wall Oven?? PDF [0.5 MB]
-
-
-
-
-
-
-
-
Dacor EWD30 User manual
-