19
English
Select AXiS X3 from the list.
Your Bluetooth device will confi rm when
pairing has been completed, and AXiS X3 will
display the blue Bluetooth logo on-screen.
During the pairing process, some
Bluetooth devices may prompt you to
enter a Passkey. Should your device
require a Passkey, enter 0000.
Should you experience problems
when pairing your device with
AXiS X3, please see the Bluetooth
Troubleshooting section on page 32.
Selecting and controlling music playback
can be done in one of two ways, either
directly from the source device (smartphone,
tablet or laptop), or from AXiS X3’s
touchscreen using the on-screen controls.
To exit Bluetooth mode and close
the connection between AXiS X3
and your source device, press the
X icon on the touchscreen.
Wirelessly stream music from your Bluetooth
smartphone, tablet, laptop or other Bluetooth
enabled device, directly to AXiS X3, without
the need for physical docking or connection.
‘Pairing’ occurs when two Bluetooth
devices talk to each other and establish
a connection. This connection is stored
in the memory of both devices, meaning
that once you ‘pair’ a particular device
with AXiS X3, you shouldn’t have to go
through the pairing process again.
Select the Bluetooth icon from the Home
Screen and AXiS X3 will enter pairing mode.
On your Bluetooth device, ensure that
Bluetooth is enabled then initiate a ‘Search’
for a new device. When the ‘Search’
process has been completed, your
device will list all the available Bluetooth
devices in your close proximity.
Pairing with Bluetooth
Devices
Passkey
Streaming Music
Management of Multiple
Bluetooth Devices
How to pair a Bluetooth
device with AXiS X3
Please note, the playback volume level
can be independently controlled from
either AXiS X3 or the source device.
If you have paired only one Bluetooth
device, on entering Bluetooth mode,
AXiS X3 will automatically seek
to connect with this device.
Should you wish to pair another device,
repeat the pairimg procedure. Firstly
ensuring that any other paired devices have
Bluetooth functionality temporarily disabled
- otherwise AXiS X3 will attempt to fi nd and
connect with a previously paired device.
Should you wish to clear all of the pairing
profi les held in AXiS X3’s memory,
press the ‘Settings’ icon on the home
screen, then select ‘Miscellaneous
Settings’ and ‘Bluetooth Reset’.
After clearing AXiS X3’s Bluetooth memory,
please remember to delete devices from
the paired device list on your Bluetooth
device, before attempting to re-pair.
Bluetooth Mode
Clearing AXiS X3’s
Bluetooth Memory
16.20pm 31 Jul 2013
Pairing Mode
16.20pm 31 Jul 2013
Software Version
Display Backlight
Miscellaneous Settings
Bluetooth Reset
Factory Reset
16.20pm 31 Jul 2013