Craftsman 580.752271 Owner's manual

Category
High-pressure cleaners
Type
Owner's manual

This manual is also suitable for

Operator'sManual
®
3000 PSI MAX
2.7 GPIViMAX
PRESSUREWASHER
ModelNo. 580.752271
HOURS: IVlon.- Fri. 8 a.m. to5 p.m. (CT)
WARNING
Beforeusing this product, readthis
manualand follow all Safety Rules
and OperatingInstructions.
ADVERTENCIA
Antes deutilizar el producto, lea este
manualy siga todas las Reglasde
Seguridad e Instrucciones de Uso.
Safety
Assembly
Operation
Maintenance
Parts
Espafiol,p. 36
This pressure washer is rated in accordance to the Pressure Washer Manufacturers Association
(PWMA) standard PW101 (Testing and Rating Performance of Pressure Washers).
Esta iimpiadora a presi6n est_ ciasificada conforme a la norma PW101 (comprobaci6n y ciasificaci6n de rendimiento de limpiadoras
a presi6n) de la Asociaci6n defabricantes de bombas a presi6n (Pressure Washer Manufacturers Association, PWMA).
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
Visit ourCraftsmanwebsite: www.craftsman.com
Part No. 208818GS Draft A (03/04/2009)
8
WARRANTY.......................................... 2
REPAIRPROTECTIONAGREEMENT........................ 2
SAFETYRULES...................................... 3-5
FEATURESANDCONTROLS.............................. 6
ASSEMBLY........................................ 7-10
OPERATION....................................... 11-15
SPECIFICATIONS..................................... 16
MAINTENANCE.................................... 17-20
STORAGE........................................... 21
TROUBLESHOOTING.................................. 22
REPLACEMENTPARTS.............................. 23-33
EMISSIONCONTROLWARRANTY..................... 34-35
ESPAKIOL......................................... 36-59
HOWTO ORDERPARTS........................ BACKPAGE
CRAFTSMANFULLWARRANTY
If this Craftsmanproduct fails due to a defect in material or workmanship within two years from the date of purchase, return it
to anySearsstore, Sears Parts & RepairService Center,or other Craftsmanoutlet in the United Statesfor free repair (or
replacementif repair proves impossible).
This warranty appliesfor only 90 days from the dateof purchase if this product is ever usedfor commercial or rental
purposes.
Thiswarranty coversONLYdefectsin material andworkmanship.Searswill NOTpayfor:
Expendableitems that canwear out from normal usewithin the warranty period, such as spray guns, hoses, nozzle
extensions, nozzles,filters and spark plugs.
Repairsnecessarybecauseof accident, or failure to operateor maintain the product according to all supplied instructions.
Preventivemaintenance,or repairs necessarydue to improper fuel mixture, contaminated or stalefuel.
This warranty givesyou specific legal rights, and you may also haveother rights which vary from stateto state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
Congratulations on making a smart purchase.
Your new Craftsman® product is designed and manufactured
for years of dependableoperation. But like all products, it
may require repair from time to time. That's when havinga
Repair ProtectionAgreement can saveyou money and
aggravation.
Here'swhat the RepairProtectionAgreement*includes:
Expertservice by our 10,000 professional repair
specialists
Unlimited serviceand no chargefor parts and labor on
all covered repairs
Product replacement up to $1500 if your covered
product can't befixed
Discountof10% from regular priceof serviceand related
installed parts not covered by the agreement;also, 10%
off regular price of preventivemaintenancecheck
Fasthelp byphone-we call it Rapid Resolution- phone
support from a Sears representative.Think of us as a
"talking owner's manual".
Onceyou purchasethe RepairProtection Agreement,a
simple phone call is all it takes for you to schedule service.
You cancall anytimeday or night, or schedule a service
appointment online.
The Repair ProtectionAgreement is a risk-free purchase. If
you cancelfor any reasonduring the product warranty
period,we will provide a full refund. Or, a prorated refund
anytime after the product warranty period expires. Purchase
your RepairProtectionAgreement today!
Somelimitations and exclusionsapply. Forpricesand
additionalinformationin the U.S.A. call 1-800-827-6655.
* Coveragein Canadavaries onsome items. Forfull
details, call SearsCanadaat 1-800-361-6665.
SearsInstallation Service
ForSearsprofessional installation of home appliances,
garagedoor openers, water heaters,and other major home
items, in the U.S.A.or Canadacall 1-800-4-MY-HOME®.
@2009
Readthis manualcarefully and becomefamiliar
with yourpressurewasher. Knowitsapplications,
itslimitations, and anyhazardsinvolved.
Important Safety Information
Safety Symbolsand Meanings
ToxicFumes Kickback
2 %
SlipperySurface Fall
ElectricalShock
FluidInjection
Fire
Explosion Operator'sManual
MovingParts
FlyingObjects Hot Surface
,A Thesafety alertsymbol indicatesa potential personal
injury hazard.A signalword (DANGER,WARNING,or
CAUTION)is usedwith thealert symbol to designatea degree
or levelof hazardseriousness.A safety symbol may be used
to representthe type of hazard.Thesignal word NOTICEis
usedto addresspractices not relatedto personalinjury.
A, DANGERindicatesa hazardwhich, if not avoided, will
result in deathor serious injury.
A, WARNINGindicates a hazardwhich, if not avoided, could
result in deathor serious injury.
A, CAUTIONindicates a hazardwhich, if not avoided, could
result in minor or moderate injury.
NOTICEaddresspractices not relatedto personal injury.
A, WARNING Theengine exhaustfrom this product
contains chemicals known to the Stateof California to
cause cancer,birth defects,or other reproductive harm.
A, WARNING This product contains lead and lead
compounds, known to the State of Californiato cause
birth defects or other reproductive harm. Washyour
handsafter handling this product.
A, WARNING Runningengine gives off carbon
monoxide, an odorless, colorless, poison gas.
_ Breathingcarbon monoxide headache,
can cause
fatigue, dizziness,vomiting, confusion, seizures,
nausea,fainting or death.
Some chemicals or detergentsmay be harmful if inhaled
or ingested, causing severenausea,fainting, or
poisoning.
OperatepressurewasherONLYoutdoors.
Keepexhaustgasfromenteringa confinedareathrough
windows,doors,ventilationintakes,or otheropenings.
DONOTstartor run engineindoorsor in anenclosedarea,
evenifwindowsanddoorsareopen.
Usea respiratoror maskwheneverthereisa chancethat
vaporsmaybeinhaled.
Readall instructionswith masksoyouarecertainthemaskwill
providethenecessaryprotectionagainstinhalingharmful
vapors.
_k WARNING Starter cord kickback(rapid retraction)can
result in bodily injury. Kickbackwill pull hand and
,_arm toward enginefaster thanyou can let go.
Broken bones,fractures, bruises, or sprains
could result.
NEVERpullstarter cord without first relieving spraygun
pressure.
When starting engine, pull cord slowly until resistanceisfelt
andthen pull rapidly to avoid kickback.
After eachstarting attempt, where enginefails to run, always
point spray gun in safe direction, pressred button and squeeze
spray gun trigger to releasehigh pressure.
Firmly grasp spray gun with both hands when using high
pressure sprayto avoid injury when spraygun kicks back.
A, WARNING Riskof electrocution.
"_,dh Contactwith power source can causeelectric
shock or burn.
NEVERspraynearpowersource.
_k WARNING The high pressure stream of water that
this equipment produces can cut through skin
and its underlying tissues, leading to serious
injury and possible amputation.
Spray gun traps high water pressure, even when engine is
stopped and water is disconnected, which can cause
injury.
DONOTallow CHILDRENto operate pressurewasher.
NEVERrepairhigh pressure hose.Replaceit.
NEVERrepairleakingconnections with sealantof any kind.
Replaceo-ring or seal.
NEVERconnect high pressure hoseto nozzleextension.
Keephigh pressure hoseconnectedto pump and spraygun
while system is pressurized.
ALWAYS point spray gun in safedirection, pressred button
andsqueezespray gun trigger to releasehigh pressure,every
time you stop engine.
NEVERaim spray gun at people,animals, or plants.
DO NOTsecure spraygun in open position.
DO NOTleavespray gun unattendedwhile machine is running.
NEVERuseaspray gun which does not havea trigger lock or
trigger guardin placeand in working order.
Always be certain spray gun, nozzlesand accessoriesare
correctly attached.
_k WARNING Fuel and its vapors are extremely
flammable and explosive.
Fire or explosion can cause severe burns
or death.
WHENADDING OR DRAININGFUEL
Turn pressurewasher OFFand let it cool at least 2 minutes
before removing fuel cap. Loosencapslowly to relievepressure
in tank.
Fill or drain fuel tank outdoors.
DONOToverfill tank. Allow spacefor fuel expansion.
If fuel spills, wait until it evaporatesbeforestarting engine.
Keepfuel awayfrom sparks, open flames, pilot lights, heat,and
other ignition sources.
DONOTlight a cigaretteor smoke.
WHENSTARTINGEQUIPMENT
Ensurespark plug, muffler,fuel cap,and air cleanerarein place.
DO NOTcrank enginewith spark plug removed.
WHENOPERATINGEQUIPMENT
DONOTtip engine or equipmentat anglewhich causes fuel to
spill.
DONOTsprayflammable liquids.
WHENTRANSPORTINGOR REPAIRINGEQUIPMENT
Transport/repair with fuel tank EMPTYor with fuel shutoff valve
OFF.
Disconnectspark plug wire.
WHENSTORINGFUELOR EQUIPMENTWITH FUELIN TANK
Store awayfrom furnaces, stoves,water heaters,clothes
dryers, or other appliancesthat have pilot light or other ignition
source becausethey can ignitefuel vapors.
_k WARNING Contact with muffler area can result in
serious burns.
_ _ Exhaust heat/gases can ignite
combustibles, structures or damage
fuel tank causing a fire.
DO NOTtouch hot parts and AVOIDhot exhaust gases.
Allow equipmentto cool beforetouching.
Keepat least5 feet (152 cm) of clearanceon all sides of
pressure washer including overhead.
It is aviolation of California Public Resource Code,Section
4442, to use or operate the engine on any forest-covered,
brush-covered, or grass-covered land unless the exhaust
system is equipped with aspark arrester, as defined in Section
4442, maintained in effective working order. Other statesor
federaljurisdictions mayhave similar laws.
Contactthe original equipment manufacturer, retailer, or dealer
to obtain a spark arrester designed for the exhaust system
installed on this engine.
Replacement parts must bethe sameand installed in the same
position asthe original parts.
_i, WARNING Use of pressure washer can create
puddles and slippery surfaces.
,_ Kickback from spray gun can cause you
to fall.
Operatepressurewasher from a stable surface.
Thecleaning areashould have adequateslopes and drainageto
reducethe possibility of a fall due to slippery surfaces.
Beextremely careful if you must usethe pressurewasherfrom
a ladder,scaffolding, or any other similar location.
Firmly grasp spray gun with both hands when using high
pressure sprayto avoid injury when spraygun kicks back.
_i, WARNING Unintentional sparking can result in fire or
electric shock.
WHENADJUSTINGOR MAKINGREPAIRSTO YOURPRESSURE
WASHER
Disconnectthe spark plug wire from the spark plug and place
the wire where it cannot contact spark plug.
WHENTESTINGFORENGINESPARK
Use approvedspark plug tester.
DONOTcheckfor sparkwith spark plug removed.
_i, WARNING Starter and other rotating parts can
entangle hands, hair, clothing, or accessories.
NEVERoperate pressurewasherwithout protective housing or
covers.
DO NOTwear looseclothing, jewelry or anything that may be
caught in the starter or other rotating parts.
Tie up long hair and removejewelry.
A WARNING Riskof eyeinjury.
Spray cansplash back or propel objects.
Always wear indirect vented (chemical splash) safety goggles
markedto comply with ANSIZ87.1 when using or in vicinity of
this equipment.
NEVERsubstitute safety glasses or dry-condition goggles for
indirect vented safetygoggles.
NOTICE High pressure spray may damagefragile items
including glass.
DONOTpointspraygunatglasswhenusingMAX(0°) nozzle.
NEVERaimspraygunatplants.
NOTICE Improper treatment of pressure washer can
damage it and shorten its life.
If you have questions about intended use,ask dealer or contact
Sears.
NEVERoperate units with broken or missing parts, or without
protective housing or covers.
DO NOTby-pass any safetydevice on this machine.
DONOTtamper with governed speed.
DONOToperate pressure washer above rated pressure.
DONOTmodify pressure washer inany way.
Beforestarting pressure washer in cold weather,check all parts
of the equipment to besure ice has not formed there.
NEVERmove machine by pulling on hoses. Use handle provided
on unit.
Checkfuel system for leaksor signs of deterioration, such as
chafed or spongy hose,loose or missing clamps, or damaged
tank or cap. Correct all defects before operating pressure washer.
This equipmentis designedto be usedwith Searsauthorized parts
ONLY.If equipmentis used with parts that DONOTcomply with
minimum specifications, userassumesall risks and liabilities.
KNOWYOURPRESSUREWASHER
Readthe Operator'sManual andsafetyrules beforeoperatingyourpressure washer.
Comparethe illustrations with your pressurewasher to familiarizeyourself with the locations of various controls and
adjustments. Savethis manualfor future reference.
(_ .....
A- SprayGun-- Controls the application of water onto cleaning
surface with trigger device. Includestrigger lock.
B- PrecisionSprayTM Nozzles-- Max,General,Jet Flush,Jet Soap
and FanSoap Nozzles:for various cleaning applications.
C- Accessory Tray -- Provides convenient storagefor accessories,
such as gun, spray tips, etc.
D - RecoilStarter-- Usedfor starting the engine manually.
E - Oil Fill/Dipstick -- Check,add and drain engine oil here.
F - EngineIdentification -- Provides model, type and code of
engine. Pleasehavethese readilyavailable if calling for
assistance.
G - Air Filter-- Protects engine byfiltering dust and debris out of
intakeair.
H - AutomaticCoolDownSystem-- Cycleswater through pump
when water reaches125°-155°F. Warm waterwill dischargefrom
pump onto ground. This system prevents internal pump damage.
J - Pump-- Develops high pressure.
K- EngineOn/Off Switch-- Push this switch to "On"before using
recoil starter. Push switch to "Off"for stopping engine.
L - HighPressureOutlet-- Connectionfor high pressurehose.
M - Water Inlet -- Connection for garden hose.
N- Warning/OperatingInstructionsTag-- Identifies hazardsand
proper procedureto start/stop pressurewasher.
P - BottleBracket-- Cleaningsolution bottle fits inwire form
bracket here. Concentratebottle not included.
R - Fuel Tank-- Fill tank with regular unleadedfuel. Always leave
room for fuel expansion.
S - Project Pro@ PerfectMW MSiphon-- Mixes concentrate with
pressure washer spray.
T - Hose Wrap and High Pressure Hose-- Hosewrap provides
easytransport and handling of the high pressure hose. Connect
oneend of hoseto water pump andthe other endto spray gun.
U - Nozzle Extensionwith QuickConnect -- Allows you to switch
betweenfive different PrecisionSprayTM nozzles.
V - Fold Down Handle -- Handle and accessory tray fold flat atop
cold enginefor space-saving storage.
Items Not Shown:
IdentificationLabel (near rear of base plate) -- Provides model
and serial number of pressure washer. Pleasehave these readily
available if callingfor assistance.
DetergentSiphoningTube/Filter-- Useto siphon pressurewasher
safedetergentsintothe low pressurestream.
Your pressure washer requires some assembly and is ready
for useonly after it has been properly servicedwith the
recommendedoil and fuel.
If you haveanyproblems with theassemblyofyour
pressurewasher, please call the pressurewasher helpline
at 1-800-222-3136.
UNPACKTHEPRESSUREWASHER
1. Removeeverythingfrom carton except pressurewasher.
2. Opencarton completely by cutting eachcorner from top
to bottom.
3. Removepressure washer from carton.
CARTONCONTENTS
Checkall contents. If anyparts are missing or damaged,call
the pressure washer helplineat 1-800-222-3136.
Main Unit
Handle
AccessoryTray
High PressureHose
Spray Gun
NozzleExtensionwith Quick ConnectFitting
Oil Bottle
HoseWrap
DetergentSiphoning Hose/Filter
Bottle BracketWireform (2)
PerfectMixTM Siphoning Unit/Hose
Parts Bag(which includes the following):
Operator's Manual
Owner's Registration Card
Bag containing 5 PrecisionSprai MNozzles
HandleFasteningHardwareKit (whichincludes):
HandleBolts (2)
CarriageBolt (2)
Rope Guide(1)
Plastic Knobsfor Handle(2)
Plastic Knob (3)
TreeClips (4)
Becomefamiliar with eachpiece beforeassemblingthe
pressure washer Identify all contents with the illustration on
page 6 If any parts are missing or damaged, call the
pressure washer helpline at1-800-222-3136.
ASSEMBLINGPRESSUREWASHER
Your Craftsmanpressure washer will needassembly before
operation:
1 Fill out and sendin registration card
2 Attach handle and accessorytray
3 Connectdetergent siphon hoseto pump
4 Add oil to engine crankcase
5 Add fuel to fuel tank
6 Connectpressure hoseto spray gun and pump
7 Connectwater supply to pump
8 Attach nozzleextension to spray gun
9 Select/attach quick connect PrecisionSprayTM nozzleto
nozzleextension
Attach Handle and Accessory Tray
1 Placehandle(A) onto handle supports (B) connectedto
main unit Make sure holes (6) in handlealign with holes
(6) on handlesupports
,
,
Insert handle carriagebolts (D) through holes from
inside of unit and attach a plastic knob (E) from outside
of unit Tighten by hand Byloosening both knobs to the
middle section of the attachmentbolt, the upper handle
canfold forward to store flat atop the cold engine Note:
DONOTfold the handle down while the engine is hot
Placeaccessorytray (F) over holes (6) on handle
(viewing from backof unit) Pushthe tree clips (H) into
the holes until they sit flat against the accessorytray
,
/
Insert multi-colored PrecisionSprai Mnozzlesand other
supplied accessoriesin spacesprovided in accessory
tray SeeHow to UseAccessory Tray
.
.
Attach rope guide (A) through handlewith plastic knob
(B). Tighten by hand. Route engine recoil rope through
guide.
Align hosewrap (6) to the back side of accessorytray.
Locate notch with "unlock"icon (D) on hosewrap.
Position notch at top with hosewrap in vertical position.
Clips in the back of accessorytray should slide into the
grooves on the inside surface of hosewrap. Slide hose
wrap on back of accessorytray and rotate 1/8 turn until
"locked"icon (E) is in vertical position. Hosewrap is
easily removed from the accessorytray for wrapping and
unwrapping of the high pressure hose. A clip to secure
the hoseon the reel makesit easyto wrap the hose
while it is detachedfrom the accessorytray.
StandardSiphonTube
Cleartube with filter:
When using the clear siphon tube, dilute
1 part PerfectMixTM ExtremeConcentrate
to 16 parts water (4 oz of concentrate
makes1/2 gallon of mix.)
Attach Project Pro® PerfectMix TM Siphon to
Pump
Attach the hose end of the blue PerfectMixTM Siphon (J) to
the barbed hosefitting (K) on the pump.
Attach PerfectMix TM Detergent Siphon to
Concentrate Bottle
PlacePerfectMixTM bottle (not included) in the wire-form
bracketon the handle. Removecap from bottle and insert the
PerfectMixTM Siphon (L). Screwthe siphon unit to the top of
the bottle (M). Usethe clip on the cap (L) to snapsiphon to
wire form bracketwhen siphon is not in a concentrate bottle.
®
.
Attach bottle brackets (F) to handlewith carriage bolts
(6) and blackplastic knobs (H). Tighten by hand.
G
2-1N-1 Soap System
The pressurewasher is equippedwith two detergent
siphoning hoses.
Project ProPerfectMixTM Siphon
Blue tube with blue bottle cap:
When usingthe blue PerfectMixTM siphon, use
the PerfectMixTM ExtremeConcentratestraight
from the bottle.
Add Engine Oil
1. Placepressurewasher on a flat, levelsurface.
2. Cleanareaaround oil fill and removeyellow oil fill
cap/dipstick.
3. Using oil funnel (optional), slowly pour contents of
provided oil bottle into oil fill opening.
NOTICE Improper treatment of pressure washer can
damage it and shorten its life.
DONOTattemptto crank or startthe engine before it has been
properly servicedwith the recommended oil. This may result in an
enginefailure.
4. Replaceoil fill cap/dipstick and fully tighten.
Add Fuel
Fuel mustmeet theserequirements:
Clean,fresh, unleaded gasoline.
A minimum of 87 octane/87 AKI (91 RON).High altitude
use, see HighAltitude.
Gasolinewith up to 10% ethanol (gasohol) or up to 15%
MTBE (methyl tertiary butyl ether) is acceptable.
NOTICE Avoid pressure washer damage.
Failureto follow Operator's Manualfor fuel
recommendations voids warranty.
DONOTuseunapprovedgasolinesuchasE85.
DONOTmixoil in gasoline.
DONOTmodifyengineto runonalternatefuels.
To protect the fuel system from gum formation, mix in a fuel
stabilizerwhen adding fuel. SeeStorage.All fuel is not the
same. If you experiencestarting or performanceproblems
after using fuel, switch to a different fuel provider or change
brands. This engine is certified to operateon gasoline. The
emission control system for this engine is EM (Engine
Modifications).
_i, WARNING Fueland its vapors are extremely
flammable and explosive.
Fireor explosion can causesevere burns
or death.
WHENADDINGFUEL
Turn pressure washerOFFand let it cool at least2 minutes
before removing fuel cap. Loosencapslowly to relievepressure
in tank.
Fill fuel tank outdoors.
DONOToverfill tank. Allow spacefor fuel expansion.
If fuel spills, wait until it evaporatesbefore starting engine.
Keepfuel awayfrom sparks, open flames, pilot lights, heat,and
other ignition sources.
DONOTlight a cigarette or smoke.
.
2.
Cleanarea around fuel fill cap, remove cap.
Slowly add regular unleadedfuel (A) to fuel tank (B). Be
careful not to overfill. To allow for fuel expansion, do not
fill abovethe bottom of thefuel tank neck.
3. Install fuel capand wait for any spilled fuel to evaporate.
CAUTION!Alcohol-blendedfuels (calledgasohol, ethanol or
methanol) canattract moisture, which leadsto separation and
formation of acids during storage.Acidic gascandamagethe
fuel system of an enginewhile in storage.
To avoid engine problems, the fuel system should be treated
with a fuel preserveror emptied beforestorage of 30 days or
longer. If adding a fuel preserver,fill the fuel tank with fresh
fuel. If only partially filled, air in the tank will promote fuel
deterioration during storage. If fuel preserver is not used,
drain the fuel tank, start the engine and let it run until the fuel
lines and carburetor are empty. Usefresh fuel next season.
See Storagefor additional information.
NEVERuse engine or carburetor cleaner products in the fuel
tank as permanent damagemay occur.
HighAltitude
At altitudes over 5,000 feet (1524 meters), a minimum
85 octane / 85 AKI (89 RON)gasolineis acceptable.To
remainemissions compliant, high altitude adjustment is
required. Operationwithout this adjustment will cause
decreasedperformance, increasedfuel consumption, and
increasedemissions. Seea qualified Searsdealerfor high
altitude adjustment information. Operationof the engine at
altitudes below 2,500 feet (762 meters) with the high altitude
kit is not recommended.
FreshStart® Fuel Cap
The FreshStart® fuel cap (C) is designedto hold a
cartridge (O)which contains fuel preserver.Adding fuel
preserver helps keepfuel fresh and carburetors cleanfor
easier starting all season long. TheFreshStart® fuel cap, if
equipped with a cartridge, automatically drips concentrated
fuel preserver into your fuel tank so you don't haveto add it
'ourself.
NOTE:FreshStart®fuel preserver cartridge is availableasan
optional accessory, retail item 7133386. It is not included
with the pressure washer. Contactthe original equipment
manufacturer, retailer, or dealerto obtain acartridge
designed for the FreshStart® fuel cap installedon this
engine.
Readand follow all instructions and warnings given in the
FreshStart® fuel preservercartridge package.
Connect Hose and Water Supply to Pump
NOTICE DONOTrun the pump without the water supply
connectedand turned on.
Damagetoequipmentresultingfrom failuretofollowthis
instructionwillvoidwarranty.
4. Runwater through garden hosefor 30 secondsto flush
it of debris. Turn off water.
IMPORTANT:DONOTsiphon standing water for the water
supply. Use ONLYcold water (less than 100°F).
5. Connectgarden hose(not to exceed50 feet in length) to
water inlet. Tighten by hand.
NOTE:Removeand discard the shipping caps from the
pump's high pressure outlet and water inlet before attaching
hoses.
1. Uncoil high pressure hose andattachone end of hoseto
baseof spray gun. Tighten by hand.
_i, WARNING The high pressure stream of water that
this equipment produces can cut through skin
and its underlying tissues, leading to serious
injury and possible amputation.
NEVERconnect high pressure hoseto nozzleextension.
Keephigh pressure hoseconnectedto pump and spraygun
while system is pressurized.
Always becertain spray gun, nozzlesandaccessoriesare
correctly attached.
2. Attach other end of high pressure hoseto high pressure
outlet on pump. Tighten by hand.
.
Beforeconnectinggarden hoseto water inlet, inspect
inlet screen (A). Cleanscreen if it contains debris or have
it replacedif damaged.DONOTrunpressure washerif
inlet screenisdamagedor missing.
NOTICE Using aOneWay Valve (vacuumbreakeror check
valve) at pump inlet can cause pump or inlet connector
damage.
ThereMUSTbeatleasttenfeetofunrestrictedgardenhose
betweenthepressurewasherinletandanydevice,suchasa
vacuumbreakeror checkvalve.
Damageto equipment resulting from failure to follow this
instruction will void warranty.
_i, WARNING Riskof eyeinjury.
Spray cansplash back or propel objects.
Always wear indirect vented (chemical splash) safety goggles
markedto comply with ANSIZ87.1 when using or in vicinity of
this equipment.
NEVERsubstitute safety glasses or dry-condition goggles for
indirect vented safetygoggles.
6. Turn ONthe water, press red button (B) on the gun and
squeezethe trigger to purge the pump system of air and
impurities.
Checklist Before Starting Engine
Reviewthe unit to ensureyou haveperformed all of the
following:
1. Besure to read SafetyRules and Operationsections
before using the pressure washer.
2. Makesure handleis in placeand secure.
3. Checkthat oil has beenadded to proper levelin engine
crankcase.
4. Add proper fuel to fuel tank.
5. Checkfor proper hoseconnections (high pressureand
water supply) and that there are no kinks, cuts, or
damageto the high pressure hose.
6. Provide proper water supply (not to exceed100°F).
10
HOWTOUSEYOURPRESSUREWASHER
If you haveanyproblems operating your pressure washer,
pleasecallthe pressure washer helpline at 1-800-222-3136.
Pressure Washer Location
PressureWasherClearance
_i, WARNING Exhaustheat/gases can ignite
combustibles, structures or damagefuel tank
causing a fire.
Keepat least5 ft. (152 cm) clearanceon all sides of pressure
washer including overhead.
Placepressure washer outdoors in an area that will not
accumulate deadlyexhaustgas. DONOTplacepressure
washer where exhaustgas (A) could accumulate and enter
inside or be drawn into a potentially occupied building.
Ensureexhaustgas is kept awayfrom anywindows, doors,
ventilation intakes, or other openingsthat can allow exhaust
gasto collect in aconfined area. Prevailingwinds and air
currents should be taken into considerationwhen positioning
_ressurewasher.
_i, WARNING Runningenginegives off carbon
monoxide,an odorless, colorless, poisonous gas.
_ Breathing cancause headache,
carbon monoxide
fatigue, dizziness,vomiting, confusion, seizures,
nausea,fainting or death.
OperatepressurewasherONLYoutdoors.
Keepexhaustgasfromenteringa confinedareathrough
windows,doors,ventilationintakes,or otheropenings.
DONOTstartor runengineindoorsor in anenclosedarea,
evenifwindowsanddoorsareopen.
To Start Your Pressure Washer
To start your engine-powered pressurewasher for the first
time, follow these instructions step-by-step. This information
alsoapplies wheneveryou start the engine after you havelet
the pressure washer sit idle for at leasta day.
1. Placepressurewasher outside nearan water source
capableof supplying water at aflow rate greaterthan
3.7 gallons per minute and no less than 20 PSI at
pressurewasher end of garden hose.
2. Checkthat high pressure hose is tightly connectedto
spray gun and pump. SeeAssemblyfor illustrations.
3. Makesure unit is in a levelposition.
4. Connectgarden hoseto water inlet on pressurewasher
pump.
NOTICE DONOTrun the pump without the water supply
connectedand turned on.
Damageto equipmentresultingfromfailureto followthis
instructionwill voidwarranty.
5. Turn ONthe water, press red button on the gun and
squeezethe trigger to purge the pump system of air and
impurities.
6. Attach nozzleextension to spray gun. Tighten by hand.
,
ChoosePrecisionSprayTM nozzleyou want to use, pull
backon collar of nozzleextension, insert nozzleand
releasecollar. Tug on nozzleto makesure it is securelyin
place.SeeHow to Use PrecisionSprayTM NozzleSystem.
8. Pushengine On/Offswitch (B) to "On" position.
\
11
IMPORTANT:Beforestarting the pressure washer, be sure
'ou arewearing safety goggles as described below.
_k WARNING Riskof eyeinjury.
Spraycan splash backor propel objects.
Always wear indirect vented (chemicalsplash) safety goggles
markedto comply with ANSIZ87.1 when using or in vicinity of
this equipment.
NEVERsubstitute safety glasses or dry-condition goggles for
indirect vented safetygoggles.
NOTE:This unit is equipped with a ReadyStart® engine.A
ReadyStart® enginemeans there is no priming or choking
required.
9. Whenstarting engine, position yourself as
recommendedand grasp starter grip handle and pull
slowly until you feel some resistance.Then pull rapidly
to start engine.
_i, WARNING Starter cord kickback (rapid retraction) can
result in bodily injury. Kickback will pull hand and
_. arm toward engine faster than you can let go.
v-
Broken bones, fractures, bruises, or sprains
could result.
NEVERpullstarter cord without first relieving spraygun
pressure.
When starting engine, pull cord slowly until resistanceisfelt
andthen pull rapidly to avoid kickback.
After eachstarting attempt, where enginefails to run, always
point spray gun in safe direction, pressred button and squeeze
spray gun trigger to releasehigh pressure.
Firmly grasp spray gun with both hands when using high
pressure sprayto avoid injury when spraygun kicks back.
O. Return recoil starter slowly. DONOT let rope "snap
back" against starter.
11. Point spray gun in a safedirection, push the red button
to releasethe trigger lock, and pull the trigger.
_i, WARNING The high pressure stream of water that
this equipment produces can cut through skin
and its underlying tissues, leading to serious
injury and possible amputation.
Spray gun traps high water pressure, even when engine is
stopped and water is disconnected, which can cause
injury.
DONOTallow CHILDRENto operatepressure washer.
Keephigh pressure hoseconnectedto pump and spraygun
while system is pressurized.
NEVERaim spraygun at people,animals, or plants.
DO NOTsecure spray gun in open position.
DO NOTleavespray gun unattendedwhile machine is running.
NEVERuse aspray gun which doesnot have atrigger lock or
trigger guard in place andin working order.
Always be certain spray gun, nozzlesandaccessoriesare
correctly attached.
_i, WARNING Contact with muffler area can result in
serious burns.
Exhaust heat/gases can ignite
combustibles, structures or damage
fuel tank causing a fire.
DO NOTtouch hot parts and AVOIDhot exhaust gases.
Allow equipmentto cool beforetouching.
Keepat least5 feet (152 cm) of clearanceon all sides of
pressure washer including overhead.
It isa violation of California Public ResourceCode,Section
4442, to use or operate the engine on any forest-covered,
brush-covered, or grass-covered land unlessthe exhaust
system is equippedwith a spark arrester,as defined in Section
4442, maintained ineffective working order. Otherstates or
federaljurisdictions may havesimilar laws.
Contactthe original equipment manufacturer, retailer, or dealer
to obtain a sparkarrester designedfor the exhaustsystem
installed onthis engine.
Replacementparts must bethe same andinstalled in the same
position as the original parts.
Howto Stop Your Pressure Washer
1. Release spray gun trigger and let engine idle for two
minutes.
.
3.
PushengineOn/Offswitch to "Off" position.
ALWAYSpoint spray gun in a safe direction, push red
button and squeezespray gun trigger to releaseretained
high water pressure.
_i, WARNING The high pressure stream of water that
this equipment produces can cut through skin
and its underlying tissues, leading to serious
injury and possible amputation.
Spray gun traps high water pressure,evenwhen engine is
stopped and water is disconnected, which can cause
injury.
Keephighpressurehoseconnectedto pumpandspraygun
whilesystemispressurized.
ALWAYSpointspraygunin safedirection,pressredbutton
andsqueezesprayguntriggerto releasehighpressure,every
timeyoustopengine.
12
IMPORTANT:Spray gun traps high water pressure,even
when engine is stopped and water is disconnected.
How to Use Accessory Tray
The unit is equipped with an accessorytray with places to
store your spray gun, nozzleextension and quick connect
spray tips. Thereis also a detachable hosewrap at the back
of the accessorytray to hold your high pressure hose.
1. Placenozzleextension in clip on back of accessorytray.
f .............
2. Placespray gun through hole on accessorytray on right
side of unit.
3. Insert multi-colored PrecisionSprayTM nozzlesin spaces
provided in accessorytray.
4. Wrap high pressure hoseon hosewrap then attach hose
wrap to back of accessorytray.
5. Hook providedon back of accessorytray for safely
storing safety goggles.
How to Use PrecisionSprayTM Nozzle System
The quick-connect on the nozzleextension allows you to
switch betweenfive different PrecisionSprayTM system
nozzles. PrecisionSprai Mnozzlescan be changedwhile
pressure washer is running oncespray gun trigger lock is
engaged.
Followtheseinstructionsto changePrecisionSprayTM
nozzles:
1. Pull back collar on quick-connect and pull current
PrecisionSprayTM nozzleoff. Store PrecisionSprayTM
nozzlesin holder provided on the accessorytray.
_k WARNING The high pressure stream of water that
this equipment produces cancut through skin
and its underlying tissues, leadingto serious
injury and possible amputation.
NEVERexchangePrecisionSprayTM nozzleswithoutthetrigger
lockbeingengagedonthespraygun.
DONOTtwist PrecisionSprayTM nozzleswhilespraying.
,
Select desired PrecisionSprayTM nozzle:
Select orange general PrecisionSprayTM nozzlefor all
purpose cleaning. Cleansvinyl siding, brick patios,
concrete driveways and other surfaces.
GENERAL
Selectred max PrecisionSprayTM nozzlefor maximum
cleaning.Greatfor cleaningstubborn stains,including
grease,tar, wax,and otherhard to removestains.
O MAX
Select cyanjet flush PrecisionSprai Mnozzlefor
quick high flow clean up and long reachcleaningof
second story siding and windows.
JET FLUSH
Select magentajet soap PrecisionSprayTM nozzleto
launch soapto second story siding and windows.
JET SOAP
13
SelectblackfansoapPrecisionSprayTM nozzlefor
general cleaning. Greatfor applying soap to
vehicles, boats, driveways,decks, and patios.
FAN SOAP
3. Pull backon collar,insert newPrecisionSprayTM nozzle
and releasecollar.Tug on nozzleto makesureit issecurely
in place.
UsageTips
For most effective cleaning, keep PrecisionSprayTM nozzle
from 8 to 24 inches (20 to 61 cm) awayfrom cleaning
surface.
If you get PrecisionSprayTM nozzletoo close, especially
using a high pressure nozzle,you may damagesurface
being cleaned.
DONOTget closer than 6 inches (15 cm) when cleaning
tires.
2-1N-1 Soap System
_i, CAUTION Chemicalscancause bodily injury, and/or
property damage.
NEVERusecausticliquidwith pressurewasher.
UseONLYpressurewashersafedetergents/soaps.Followall
manufacturersinstructions.
CleaningandApplyingDetergentwith the
Project Pro® PerfectMixTM Siphon
To apply undiluted detergent using the blue
PerfectMixTM siphon, follow these steps:
1. Reviewuse of PrecisionSprayTM
nozzles.
2. Attach PerfectMixTM siphon hoseto
pump and PerfectMixTM concentrate
bottle.
NOTICE Contactwith the hot muffler candamagedetergent
siphoning tube.
When inserting the siphon intoa detergent solution bottle, route
thetubesoasto keepit from inadvertently contacting thehot
muffler.
3. Make sure fan soap (black) or jet soap nozzle(magenta)
is installed.
NOTE:Detergentcannot be applied with the high pressure
nozzles(Cyan,Orangeor Red).
4. Make sure garden hose is connectedto water inlet.
Checkthat high pressure hoseis connected to spray gun
and pump. Turn on water.
NOTICE You must attachall hoses beforeyou start the
engine.
Startingtheenginewithoutall thehosesconnectedandwithout
thewaterturnedONwilldamagethe pump.
Damageto equipmentresultingfrom failureto followthis
instructionwillvoidwarranty.
5. Start engine following instructions How to Start Your
Pressure Washer.
6. Apply detergentto a dry surface, starting at lower
portion of areato be washed and work upward, using
long, even, overlappingstrokes.
7. Allow detergent to "soakin"for 3-5 minutes before
washing and rinsing. Reapplyas neededto prevent
surfacefrom drying. DONOTallow detergent to dry on
(prevents streaking).
Cleaningand ApplyingDetergentwith the StandardClear
Siphon
To apply diluted detergent using the
standard clearsiphon tube, follow these
steps:
1. Reviewuseof PrecisionSprayTM
nozzles.
2. Attach clear siphon hoseto barbedfitting on pump.
3. Mix detergent solution as required by job.
4. Placesmall filter end of clear siphoning tube into
container with diluted solution as described above.
NOTE:DONOT insert standard siphon hose in Extreme
Concentrate.Failureto dilute concentratewill causeexcessive
application and consumption of solution.
NOTE:Makesure the filter is fully submerged in fluid while
applying solution.
NOTICE Contactwith the hot muffler can damagedetergent
siphoning tube.
Wheninsertingthesiphonintoadetergentsolutionbottle,route
thetubesoasto keepitfrom inadvertentlycontactingthehot
muffler.
5. Makesure fan soap (black) or jet soap nozzle(magenta)
is installed.
NOTE:Detergentcannot be applied with the high pressure
nozzles(Cyan,Orangeor Red).
6. Makesure garden hoseis connectedto water inlet.
Checkthat high pressure hose is connectedto spray gun
and pump. Turn on water.
NOTICE You must attachall hoses beforeyou start the
engine.
Startingtheenginewithoutall thehosesconnectedandwithout
thewaterturnedONwilldamagethe pump.
Damageto equipmentresultingfrom failureto followthis
instructionwillvoidwarranty.
14
.
8.
Start enginefollowing instructions How to Start Your
Pressure Washer.
Apply detergent to a dry surface, starting at lower
portion of areato be washedand work upward, using
long, even,overlapping strokes.
9. Allow detergent to "soak in" for 3-5 minutes before
washing and rinsing. Reapplyas neededto prevent
surfacefrom drying. DONOTallow detergentto dry on
(prevents streaking).
IMPORTANT:You must flush the detergent siphoning system
after each use by placingthe filter into a bucket of clean
water, then run the pressure washer in low pressure for 1-2
minutes.
Pressure Washer Rinsing
ForRinsing:
1. Removesoap PrecisionSprayTM nozzlefrom nozzle
extension.
2. Selectand install desiredhigh pressure nozzlefollowing
instructions How to UsePrecisionSpraSMNozzleSystem.
3. Keepspray gun a safedistance from areayou plan to
spray.
A. WARNING Kickbackfrom spray gun cancauseyou to
fall.
Operatepressurewasherfrom astablesurface.
Beextremelycarefulif youmustusethepressurewasherfrom
a ladder,scaffolding,or anyothersimilarlocation.
Firmlygraspspraygunwith bothhandswhenusinghigh
pressuresprayto avoidinjurywhenspraygunkicksback.
4. Apply a high pressure spray to a small area andthen
checksurface for damage. If no damageis found, you
can assumeit is okay to continue rinsing.
5. Start attop of areato be rinsed, working down with
same overlapping strokes asyou used for cleaning.
Cleaning Detergent Siphoning Tube
If you usedthe cleardetergent siphoning tube, you must
flush it with cleanwater beforestopping the engine.
1. Placedetergent siphoning tube/filter in a bucketfull of
cleanwater.
.
3.
.
5.
Removehigh pressure nozzlefrom nozzleextension.
Select and install a soap nozzlefollowing instructions
How to Use PrecisionSprayTM NozzleSystem.
Flushfor 1-2 minutes.
Shut off engine following instructions How to Stop
Pressure Washerand turn off water supply.
6. ALWAYSpoint spray gun in a safe direction push red
button and squeezespray gun trigger to releaseretained
high water pressure.
IMPORTANT:Spray gun traps high water pressure,even
when engine is stopped and water is disconnected.
A, WARNING The high pressure stream of water that
this equipment produces can cut through skin
and its underlying tissues, leading to serious
injury and possible amputation.
Spray gun traps high water pressure,evenwhen engine is
stopped and water is disconnected, which can cause
injury.
Keephighpressurehoseconnectedto pumpandspraygun
whilesystemispressurized.
ALWAYSpointspraygunin safedirection,pressredbutton
andsqueezesprayguntriggerto releasehighpressure,every
timeyoustopengine.
Automatic Cool Down System (Thermal Relief)
Ifyou run the engine on your pressure washer for
3-5 minutes without pressing the trigger on the spray gun,
circulating water in the pump can reachtemperatures above
125°F.The systemengagesto cool the pump by discharging
the warmwater ontothe ground.
15
ENGINETECHNICALINFORMATION
This is a single cylinder, overheadvalve (OHV), air cooled
engine. It is a low emissions engine.
In the State of California, Model 120000 enginesare certified
by the California Air Resources Boardto meet emissions
standardsfor 125 hours. Such certification does not grant
the purchaser, owner or operator of this engine any
additional warranties with respectto the performanceor
operational life of this engine.Theengine is warranted solely
according to the product and emissions warranties stated
elsewherein this manual.
Power Ratings
Thegross power rating for individual gas engine models is
labeled in accordancewith SAE(Society of Automotive
Engineers)codeJ1940 (Small Engine Power & Torque
Rating Procedure), and rating performance has been
obtained and corrected in accordancewith SAEJ1995
(Revision 2002-05). Torquevalues are derived at 3060 RPM;
horsepower values are derived at 3600 RPIVI.Actual gross
engine power will be lower and is affectedby, among other
things, ambient operating conditions and engine-to-engine
variability. Givenboth the wide arrayof products on which
enginesare placed andthe variety of environmental issues
applicableto operatingthe equipment,the gas engine will not
developthe ratedgross power when used in a given pieceof
power equipment (actual "on-site"or net power). This
difference is due to a variety of factors including, but not
limited to, accessories(air cleaner, exhaust, charging,
cooling, carburetor, fuel pump, etc.), application limitations,
ambient operating conditions (temperature, humidity,
altitude), and engine-to-enginevariability. Dueto
manufacturing and capacity limitations, Briggs & Stratton
may substitute an engine of higher ratedpower for this
Seriesengine.
This pressurewasher is rated in accordanceto the Pressure
Washer ManufacturersAssociation (PWIVIA)standard PW101
(Testing and Rating Performanceof PressureWashers).
PRODUCTSPECIFICATIONS
Pressure Washer Specifications
Max Outlet Pressure ....................... 3,000 PSI
Max Flow Rate............................. 2.7 GPM
DetergentMix ........................ Use asdirected
Water SupplyTemperature .......... Not to exceed100°F
Engine Specifications
Bore ................................. 2.69 in. (68mm)
Stroke ............................... 2.04 in. (52mm)
Displacement ........................ 11.58in. (190cc)
SparkPlug
Type:...................... Briggs & Stratton 692051
SetGapTo: ...................... 0.020inch (0.50mm)
ArmatureAir Gap:........... 0.010-0.014in.(0.25-0.36mm)
Valveclearancewith valvesprings installedand piston 1/4 in.
(6 mm) pasttop deadcenter(checkwhenengineiscold).
Intake.................... 0.004-0.008in.(0.10-0.20mm)
Exhaust .................. 0.004-0.008in.(0.10-0.20mm)
FuelCapacity............................... 1.6Quarts
0il Capacity........................ 20 Ounces(0.6 liter)
NOTE:Forpractical operation, the engine load should not
exceed85% of ratedpower. Enginepower will decrease
3-1/2% for each1,000 feet (300 meters) above sealeveland
1% for each 10° F(5.6° C) above77° F(25° C). It should
operatesatisfactorily at an angle up to 15°.
16
OWNER'SRESPONSIBILITIES
Follow the hourly or calendarintervals, whichever occurs
first. More frequent service is required when operating in
adverseconditions noted below.
Changeengine oil
Check/clean water inletscreen'
Checkhigh pressure hose
Checkdetergentsiphoning hose/tanks
Checkspray gun and assembly for leaks
Cleandebris
Checkengineoil level
Cleanengine air cleaner2
Changeengine oil2
Inspect muffler and spark arrester
Replaceengine air cleaner_
Replacespark plug
Cleancooling systeW
Clean if clogged. Replace if perforated or torn.
2Service more often under dirty or dusty conditions.
General Recommendations
Regularmaintenancewill improve the performanceand
extendthe life of the pressurewasher. Seeany Searsor
other qualified service dealerfor service.
Thepressure washer warranty does not cover items that
havebeensubjected to operator abuseor negligence.To
receivefull valuefrom the warranty, the operator must
maintain pressurewasher as instructed in this manual
including proper storage asdetailed in Storage.
Someadjustments will needto be made periodically to
properly maintain your pressurewasher.
All service and adjustments should be madeat least once
eachseason.Follow the requirementsin the Maintenance
Schedulechart above.
NOTE:Oncea yearyou should cleanor replacethe spark
plug and replacethe air filter. A new spark plug and clean air
filter assure proper fuel-air mixture and helpyour engine run
better and last longer.
Pump Oil
DONOTattempt any oil maintenanceon this pump. The
pump is pre-lubricated and sealedfrom the factory, requiring
no additional maintenancefor the life of the pump.
Emissions Control
Maintenance,replacement,or repair ofthe emissions
controldevicesand systemsmay be performedbyany non-
roadenginerepair establishmentor individual. However,
to obtain "no charge" emissions control service, the work
must be performed by a factory authorizeddealer. Seethe
Emissions Warranty.
Before Each Use
1. Checkengine oil level.
2. Cleandebris.
3. Checkwater inlet screenfor damage.
4. Checkhigh pressure hose for leaks.
5. Checkgun and nozzleextension assemblyfor leaks.
6. Purge pump of air and contaminants.
PRESSUREWASHERMAINTENANCE
Clean Debris
Daily or before use, cleanaccumulateddebris from pressure
washer. Keeplinkage, spring and controls clean. Keeparea
around and behind muffler free from any combustible debris.
Inspect cooling air slots and openings on the pressure
washer. Theseopenings must be kept clean and
unobstructed.
Pressurewasher parts should be kept cleanto reducethe
risk of overheating and ignition of accumulated debris.
Usea damp cloth to wipe exterior surfaces clean.
NOTICE Improper treatment of pressurewasher can
damageit and shorten its life.
DONOTinsertanyobjectsthroughcoolingslots.
Usea soft bristle brush to loosencaked on dirt, oil, etc.
Usea vacuum cleanerto pick up loosedirt and debris.
Check and Clean Inlet Screen
Examinegarden hoseinlet screen. Cleanif it is clogged or
replaceif it is torn.
Check High Pressure Hose
High pressure hoses candevelop leaksfrom wear, kinking,
or abuse. Inspect hose beforeeachuse. Checkfor cuts,
leaks,abrasions,bulging of cover, or damageor movement
of couplings. If anyof these conditions exist, replacehose
immediately.
_i, WARNING The high pressure stream of water that
this equipment produces can cut through skin
and its underlying tissues, leading to serious
injury and possible amputation.
NEVERrepairhighpressurehose.Replaceit.
ReplacementhoseratingMUSTexceedmaximumpressure
ratingof unit.
17
Check Gun and Nozzle Extension
Examinehoseconnectionto spraygun and makesureit is
secure.Testtrigger bypressingit and makingsureit springs
backintoplacewhenyou releaseit. Donotdepressredbutton
andtesttrigger.Youshouldnot beableto presstrigger. Replace
spraygun immediatelyif it fails anyof thesetests.
Nozzle Maintenance
A pulsing sensationfelt while squeezingthe spray gun trigger
may be causedby excessivepump pressure.Theprincipal
causeof excessivepump pressure is a nozzleclogged or
restricted with foreign materials, such asdirt, etc. To correct
the problem, immediately cleanthe nozzlefollowing these
instructions:
1. Shut off engine and turn off water supply.
2. ALWAYSpoint spray gun in a safe direction, press red
button and and squeezespray gun trigger to release
retainedhigh water pressure.
_i, WARNING The high pressure stream of water that
this equipment produces cancut through skin
and its underlying tissues, leadingto serious
injury and possible amputation.
Spraygun traps high water pressure,evenwhen engine is
stopped and water is disconnected, which can cause
injury.
Keephighpressurehoseconnectedto pumpandspraygun
whilesystemispressurized.
ALWAYSpointspraygunin safedirection,pressredbutton
andsqueezesprayguntriggerto releasehighpressure,every
timeyoustopengine.
.
4.
Removenozzlefrom end of nozzleextension.
Use a small paper clip to free anyforeign material
clogging or restricting nozzle(A).
.
6.
Removenozzleextensionfrom spray gun.
Using a garden hose,remove additional debris by back
flushing water through nozzleextension. Backflush
between 30 to 60 seconds.
7. Reinstallnozzleintonozzleextension.
8. Reconnect nozzleextensionto spray gun.
9. Make sure garden hose is connectedto water inlet.
Checkthat high pressure hoseis connected to spray gun
and pump. Turn on water.
10. Start enginefollowing instructions How to Start Your
Pressure Washer.
11. Test pressurewasher by operatingwith eachquick
connect nozzle.
O-Ring Maintenance
Purchasean O-Ring RepairKitat your localSearsor bycalling
1-800-4-MY-HOME(469-4663) or online atwww.sears.com.It
is notincludedwith thepressurewasher.This kit includes
replacemento-rings,rubberwasherandwater inletfilter. Referto
the instructionsheetprovidedin thekit to serviceyour unit's
o-rings.
_i, WARNING The high pressure stream of water that
this equipment produces can cut through skin
and its underlying tissues, leading to serious
injury and possible amputation.
NEVERrepairleakingconnectionswithsealantofanykind.
Replaceo-ringor seal.
ENGINEMAINTENANCE
_i, WARNING Unintentional sparking can result in fire or
electric shock.
WHENADJUSTINGOR MAKINGREPAIRSTOYOUR PRESSURE
WASHER
Disconnectthe spark plug wire from the spark plug and place
the wire where it cannot contact spark plug.
WHENTESTINGFORENGINESPARK
Useapproved spark plug tester.
DONOTcheckfor sparkwith spark plug removed.
Oil
OilRecommendations
We recommendthe use of Briggs & Stratton Warranty
Certifiedoils for best performance.Other high-quality
detergent oils are acceptableif classified for serviceSF,SG,
SH,SJ or higher. DONOTusespecial additives.
Outdoortemperatures determine the proper oil viscosity for
the engine.Usethe chart to selectthe best viscosity for the
outdoor temperature range expected.
oF
104___506886 _03o__
32 .o
14
-4
-22
°C
\ 40
;_30
°_20
10
_m m 0
--_C °
-20
-30
* Below40°F(4°C)the useofSAE30will resultin hardstarting.
** Above80°F(27°C)theuseof 10W30maycauseincreasedoil
consumption.Checkoil levelmorefrequently.
NOTE:Synthetic oil meeting ILSACGF-2,API
certification mark and APIservice symbol with
"SJ/CF ENERGYCONSERVING"or higher, is an
acceptableoil at all temperatures. Useof synthetic oil
does not alter required oil changeintervals.
18
CheckingOil Level
1. Make sure pressure washer is on a levelsurface.
2. Removeoil dipstick and wipe dipstick with clean cloth.
Replaceand tighten dipstick. Removeand andcheck oil
level.
3. Verify oil is at FULL mark (top hole) on dipstick. Replace
and tighten dipstick.
Full
AddingEngineOil
1. Make sure pressure washer is on a levelsurface.
2. Checkoil levelas described in CheckingOilLevel
3. If needed,slowly pour oil into oil fill opening to the FULL
mark on dipstick. DONOToverfill.
4. Tip your pressure washer to drain oil from oil fill into a
suitable container making sureyou tip your unit away
from spark plug. When crankcaseis empty, return
pressurewasher to upright position.
5. Slowly pour recommendedoil (about 20 oz. (0.6 I)) into
oil fill opening. Pauseto permit oil to settle. Fillto Full
mark on dipstick.
6. Wipe dipstick cleaneachtime oil level is checked. DO
NOToverfill.
7. Replaceand tighten dipstick.
8. Wipe up any remaining oil.
9. Reconnectspark plug wire to spark plug.
Service Air Cleaner
Your engine will not run properly and may be damagedif you
run it with a dirty air cleaner. Service more often if operating
under dirty or dusty conditions. Replacementsare available
atyour local Searsservicecenter.
To service the air cleaner, follow these steps:
1. Loosenfastener (A) and remove air cleanercover (B).
NOTICE Overfilling with oil may cause the engine to not
start, or hard starting.
DO NOToverfill.
If overthe FULLmark on dipstick, drain oil to reduceoil levelto
FULLmark on dipstick.
4. Replaceand tighten dipstick.
ChangingEngineOil
If you are usingyour pressurewasher under extremely dirty
or dusty conditions, or in extremely hot weather, changeoil
more often.
_i, CAUTION Avoid prolonged or repeatedskin contact
with usedmotor oil.
Usedmotoroil hasbeenshownto causeskincancerin certain
laboratoryanimals.
Thoroughlywashexposedareaswith soapandwater.
KEEPOUTOFREACHOFCHILDREN.DON'T
POLLUTE.CONSERVERESOURCES.RETURN
USEDOILTOCOLLECTIONCENTERS.
Changeoil while engine is still warmfrom running,as
follows:
1. Drain fuel tank by running pressure washer until fuel
tank is empty.
2. Disconnect spark plug wire and keepit away from spark
plug.
3. Cleanarea around oil fill, removeoil fill cap/dipstick.
Wipe dipstick clean.
2. Removeair cleaner (C)from base(D).
3. To loosendebris, gently tap air cleaneron a flat surface.
If excessivelydirty, replacewith a newair cleaner.
4. Install the air cleanerinto the base. Makesure air
cleanerfits securelyin the base.
5. Install cover and securewith fastener. Make sure
fastener is tight.
NOTE:You can purchasenew air filter elements by calling
1-8OO-4-MY-NOME(469-4663).
Service Spark Plug
Changingthe spark plug will help your engine to start easier
and run better.
1. Cleanareaaround spark plug.
2. Removeand inspect spark plug.
3. Replacespark plug if electrodes are pitted, burned or
porcelain is cracked. Usethe recommendedreplacement
plug. See Specifications.
19
.
Checkelectrode gap with wire feeler gaugeand reset
spark plug gap to recommended gap if necessary(see
Specifications).
5. Install spark plug and tighten firmly.
NOTE:You can purchase a newspark plug by calling
1-800-4-1VlY-HOIVlE(469-4663).
Inspect Muffler and Spark Arrester
Inspectthe mufflerfor cracks,corrosion, or otherdamage.
Removethe spark arrester,if equipped,and inspectfor
damageor carbonblockage.If replacementparts are required,
makesureto useonly original equipmentreplacementparts.
_i, WARNING Contact with muffler area can result in
serious burns.
_ Exhaust heat/gases can ignite
combustibles, structures or damage
fuel tank causing a fire.
DO NOTtouch hot parts and AVOID hot exhaust gases.
Allow equipment to cool beforetouching.
Keepat least5 feet (152 cm) of clearanceon all sidesof
pressure washer including overhead.
It isa violation of California Public Resource Code,Section
4442, to use or operatethe engine on anyforest-covered,
brush-covered,or grass-covered land unless the exhaust
system is equippedwith aspark arrester,as defined in Section
4442, maintained ineffectiveworking order. Otherstates or
federal jurisdictions may havesimilar laws.
Contactthe original equipment manufacturer, retailer, or dealer
to obtain a sparkarrester designedfor the exhaustsystem
installedon this engine.
Replacementparts must bethe sameand installed in the same
position as the original parts.
Air Cooling System
Overtime debris may accumulate in cylinder cooling fins and
cannot be observedwithout partial engine disassembly. For
this reason,we recommendyou havea qualifiedSears
servicedealer cleanthe cooling system per recommended
intervals (see MaintenanceSchedule). Equallyimportant is to
keeptop of engine freefrom debris. See CleanDebris.
Carburetor Adjustment
Thecarburetor on this engine is low emission. It is equipped
with a non-adjustable idle mixture valve.Top speedhas been
set at the factory. If adjustment is required,seean authorized
servicedealer.
_i, CAUTION Excessively high operating speeds increase
risk of injury and damage to pressure washer.
Excessively low speeds impose a heavy load.
DO NOTtamper with governedspeed.Pressurewasher
supplies correct ratedfrequency and voltage when running at
governedspeed.
DO NOTmodify pressure washer in any way.
AFTEREACHUSE
Water should not remain in the unit for long periods of time.
Sedimentsor minerals candeposit on pump parts and
"freeze" pump action. Follow theseprocedures after every
use:
1. Shut off engine,turn off water supply, point gun in a
safedirection, press red button and squeezetrigger to
relievetrapped pressure and let engine cool.
_i, WARNING The high pressure stream of water that
this equipment produces can cut through skin
and its underlying tissues, leading to serious
injury and possible amputation.
Spray gun traps high water pressure,evenwhen engine is
stopped and water is disconnected, which can cause
injury.
Keephighpressurehoseconnectedto pumpandspraygun
whilesystemispressurized.
ALWAYSpointspraygunin safedirection,pressredbutton
andsqueezesprayguntriggerto releasehighpressure,every
timeyoustopengine.
.
.
.
5.
6.
Disconnecthose from spray gun and high pressure
outlet on pump. Drainwater from hose,gun, and spray
tip extension. Usea ragto wipe off the hose.
Empty pump of all pumped liquids by pulling recoil
handleabout 6 times. This should remove most liquid in
pump.
Coilhigh pressure hoseon hosewrap provided on
accessorytray.
Store unit in a clean, dry area.
If storing for more than 30 days see Long Term Storage
on next page.
_i, WARNING Fueland its vapors are extremely
flammable and explosive.
Fireor explosion can causesevere burns
or death.
WHENSTORINGFUELOREQUIPMENTWITHFUELINTANK
Storeawayfrom furnaces,stoves,waterheaters,clothes
dryers,or otherappliancesthathavepilotlightor other
ignitionsourcebecausetheycanignitefuelvapors.
2O
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60

Craftsman 580.752271 Owner's manual

Category
High-pressure cleaners
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages