Samsung SC9630 Owner's manual

Code No. DJ68-00621L REV(0.0)

imagine the possibilities

Thank you for purchasing a Samsung product.

To receive a more complete service,

please register your product at

www.samsung.com/register

Vacuum Cleaner

user manual

✻ Before operating this unit, please read the instructions carefully.

✻ For indoor use only.

English

SC9600 series

This manual is made with 100% recycled paper.

WARNING

2_ safety information

safety information

SAFETY INFORMATION

•

Before operating the appliance, please read this manual thoroughly and retain

it for your reference.

•

Because these following operating instructions cover various models,

the characteristics of your vacuum cleaner may differ slightly from those

described in this manual.

This vacuum cleaner is designed for domestic household use only. Do not use this

vacuum cleaner to clear building waste or debris. Do not use this vacuum cleaner with

any of the ﬁ lters removed as this could cause damage to the internal components and

void your warranty.

CAUTION/WARNING SYMBOLS USED

WARNING

Indicates that a danger of death or serious injury exists.

CAUTION

Indicates that a risk of personal injury or material damage exists.

OTHER SYMBOLS USED

Represents something you must NOT do.

Represents something you must follow.

Indicates that you must disconnect the power plug from the socket.

WARNING

safety information _3

safety information

IMPORTANT SAFEGUARDS

1. Read all instructions carefully. Before switching on, make sure that the voltage of your

electricity supply is the same as that indicated on the rating plate on the bottom of the

cleaner.

2. WARNING : Do not use the vacuum cleaner when rug or ﬂ oor is wet.

Do not use to suck up water.

3. Close supervision is necessary when any appliance is used by or near children. Do not

allow the vacuum cleaner to be used as a toy. Do not allow the vacuum cleaner to run

unattended at any time. Use the vacuum cleaner only for its intended use as described in

these instructions.

4. Do not use the vacuum cleaner without a dust bin. Empty the dust bin before it is full in

order to maintain the best efﬁ ciency.

5. Do not use the vacuum cleaner to pick up matches, live ashes or cigarette butts. Keep the

vacuum cleaner away from stoves and other heat sources. Heat can deform and discolour

the plastic parts of the unit.

6. Avoid picking up hard, sharp objects with the vacuum cleaner as they may damage the

cleaner parts. Do not stand on the hose assembly. Do not put weight on the hose. Do not

block the suction or the exhaust port.

7. Switch the vacuum cleaner off on the body of the machine before unplugging from the

electrical outlet. Disconnect the plug from the electrical outlet before emptying the dust

bin. To avoid damage, please remove the plug by grasping the plug itself, not by pulling on

the cord.

8. This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless they

have been given supervision or instruction concerning use of the appliance by a person

responsible for their safety.

9. Children should be supervised to ensure that they do not play with the appliance.

10. The plug must be removed from the socket outlet before cleaning or maintaining the

appliance.

11. The use of an extension cord is not recommended.

12. If your vacuum cleaner is not operating correctly, switch off the power supply and consult

an authorized service agent.

13. If the supply cord is damaged, it must be replaced by the manufacturer or its service

agent or a similarly qualiﬁ ed person in order to avoid a hazard.

14. Don’t carry the vacuum cleaner by holding the hose.

Use the handle on the vacuum cleaner set.

15. Unplug the cleaner when not in use. Turn off the power switch before unplugging.

contents

4_ contents

ASSEMBLING THE CLEANER

05

05 Assembling the Cleaner

OPERATING THE CLEANER

06

06 Power cord

06 Power control

07 Body-control type

MAINTAIN TOOLS AND FILTER

08

08 Using accessory

09 Maintain ﬂ oor tools

11 Emptying the dust bin

12 Cleaning the dust pack

14 Cleaning the outlet ﬁ lter

14 Change the battery

TROUBLESHOOTING

15

assembling the cleaner

01 ASSEMBLING THE CLEANER

assembling the cleaner _5

• Please do not press the button

of dust bin handle when

carrying machine.

• For storage, park the ﬂ oor

nozzle.

OPTION

CAUTION

operating the cleaner

6_ operating the cleaner

POWER CORD

• When removing the plug from the electrical outlet, grasp the plug,

not the cord.

POWER CONTROL (INFRARED CONTROL)

- HOSE

1. Vacuum cleaner ON/OFF( )

Press the ON/OFF button to operate the

vacuum cleaner. Press again to stop the

vacuum cleaner.

2. Vacuum cleaner (-,+)

Press the MODE button repeatedly to select the

correct mode.

(ON) MIN → SILENT → MAX

3. Using Auto mode

Press the Auto button to operate the vacuum cleaner automatically.

Don’t cover the handle sender when you use a handle control button.

Handle Control

The cleaner is controlled by using

infrared signals.

sender

1

2 3

02 OPERATING THE CLEANER

operating the cleaner _7

BODY-CONTROL TYPE

- HOSE

To reduce suction for cleaning draperies, small rugs, and

other light fabrics, pull the tap air until the hole is open.

- BODY

Press the power ON/OFF button repeatedly to start and

stop the vacuum cleaner.

(OFF ➞ ON ➞ OFF)

To control power level, just slide the power control button

right and left.

MIN = For delicate surface e.g. net curtains.

MAX = For hard ﬂ oors and heavily soiled carpets.

- BODY

Press the power ON/OFF button repeatedly to start and

to stop the vacuum cleaner.

(OFF → ON → OFF)

If the remote handle control is not working, the

cleaner can be operated using the ON/OFF button

on the body of the machine.

The ﬁ lter light is illuminated when the dust pack requires checking or emptying.

An audio signal will also sound.

The ON/OFF button operates the vacuum cleanner or stops it.

The ﬁ lter light is illuminated when the dust pack requires checking or

emptying. An audio signal will also sound.

This indicates that the automatic suction mode is selected. The level of

suction is indicated by the LED display.

1

3

2

8_ maintain tools and ﬁ lter

maintain tools and ﬁ lter

USING ACCESSORY

ACCESSORY

•

Push the accessory on to the end of

the hose handle.

•

To use the dusting tool, push the

accessory on to the end of the hose

handle.

•

To use the upholstery tool, push the

accessory on to the end of the hose

handle.

PIPE

•

Adjust the length of the telescopic pipe by sliding

the length control button located in the center of the

telescopic pipe back and forth.

•

To check for blockages, separate the telescopic pipe and

adjust to shorten. This allows for easier removal of waste

clogging the tube.

1234

5

Carpet Cleaning Floor Cleaning

maintain tools and ﬁ lter _9

03 MAINTAIN TOOLS AND FILTER

maintain tools and ﬁ lter

MAINTAIN FLOOR TOOLS

ELBOW EXTENDING TUBE (OPTION)

1. Connect the elbow extending tube to connecting part for hose knob and telescopic

pipe.

2. Fit the telescopic pipe to the lower part of the elbow extending tube.

3. Press the PUSH button.

4. With the PUSH button pressed, the elbow extending tube is folded.

5. Using the elbow extending tube allows hard to reach areas (e.g. under furniture)to be

cleaned without having to kneel down.

3 Way Brush (Option)

• Adjust the inlet lever according to the ﬂ oor surface.

• Remove waste matter completely if the inlet is blocked.

2-Step Brush (Option)

• Adjust the inlet lever according to the ﬂ oor surface.

• Remove waste matter completely if the inlet is blocked.

Parquet Master Brush (Option)

• Vacuum dust in wide area at once.

• Remove waste matter completely if

the inlet is blocked.

1

Turbine

Brush

2 3

CAUTION

1 2

4 5

3

6

10_ maintain tools and ﬁ lter

maintain tools and ﬁ lter

Parquet Brush (Option)

• Vacuum dust in wide area at once.

• Remove waste matter completely if the

inlet is blocked.

Blanket Brush(Option)

1. Remove waste matter completely when inlet is blocked.

2. Turn the lock button to (

), and remove.

3. To reassemble, align the cover to the front of the main body and close. After closing the

cover, ensure that the lock button is turned to the (

) position.

Use for bedclothes only. Be cautious not to damage brush during unclogging.

Super turbine brush (Option)

Frequent vacuuming of hair or pet fur may cause a falling-off of the rotation due to

matters tangled around the drum. In this case, clean the drum with care.

1. Turn the lock button to unlock position (

) using a coin or a similar object.

2. Remove the guide air use the like coin.

3.

Remove waste matter such as dust and hair tangled around the brushbar using scissors.

4. Remove dust inside the brush housing using a dry duster or crevice tool.

5. Assemble the guide air.

6. Turn the lock button to lock position (

) using a coin or a similar object.

Please be careful not to damage the brush.

For picking up pet hair

and ﬁ bre on upholstery

and bed linen.

For improved

pickup of pet

hair and ﬁ bre on

carpets.

1 2

4 5

3

6

maintain tools and ﬁ lter _11

03 MAINTAIN TOOLS AND FILTER

Power Pet Plus Brush (Option)

Frequent vacuuming of hair or pet fur may cause a falling-off of the rotation due to matters

tangled around the drum. In this case, clean the drum with care.

1. Push the Open button of the transparent screen cover to separate the cover.

2. Remove the brushbar from the transparent screen.

3.

Remove waste matter such as dust and hair tangled around the brushbar using scissors.

4. Remove dust inside the brush housing using a dry duster or crevice tool.

5. Insert brushbar into rotating belt and assemble.

6. Click the transparent screen cover back into place to reassemble.

EMPTYING THE DUST BIN

For improved

pickup of pet

hair and ﬁ bre on

carpets.

Once dust reaches the dust

full mark, empty the dust bin.

Take the dust bin out by

pulling the button.

Open the dust bin cover

Throw the dust away in the

bin.

After emptying the dust bin,

remove the obstacles like

hair, fur on the cap of the

dust bin. And close the dust

bin cover.

Before use, push the dust

bin into the main body and

press the cover dust of the

vacuum cleaner until you

hear the “click” sound.

1

4

2

5

3

6

ON(MAX) OFF

Handle Control

Body Control

12_ maintain tools and ﬁ lter

maintain tools and ﬁ lter

Option

When emptying any vacuum cleaner it is difﬁ cult to avoid exposure to

dust. To minimize this risk, Please ensure that you encase the dust pot in

a large bag to empty it and close the bag as tightly as possible round the

pot. Remove the pot and close the bag as tightly and quickly as possible

and dispose of this immediately. it is advisable to wear disposable gloves

and a face mask while emptying the cleaner. If at all possible, ask a non

allergy sufferer to empty the dust pot when required.

You may rinse the dust bin

with cold water.

- Empty into a plastic bag.

(recommended for asthma/allergy sufferers)

CLEANING THE DUST PACK

WHEN TO CLEAN THE DUST PACK

• The lamp will turn red when

suction is reduced. If the light

comes on, please clean the dust

pack.

• Turn the vacuum power to ‘MAX’.

• If the ﬁ lter check indicator turns red with the inlet ﬂ oating

10cm above ﬂ at ﬂ oor, clean the dust pack.

When suction is noticeably reduced continuously, please cleaning the dust pack.

7

2

5

3

6

8

1

4

maintain tools and ﬁ lter _13

03 MAINTAIN TOOLS AND FILTER

Make sure the ﬁ lter is completely dry before putting it back

into the vacuum cleaner. Allow 12 hours for it to dry.

CLEANING THE DUST PACK

Take the dust bin out. Pull the dust pack cover to

open.

Close the dust bin cover.

Before use, push the dust bin into the main body of the

vacuum cleaner until you hear the “click” sound.

Remove the sponge and

ﬁ lter from the dust pack.

Wash the sponge and the

ﬁ lter of the dust pack with

water.

Let the sponge and ﬁ lter dry

in the shade for more than

12 hours.

Put the sponge and ﬁ lter into

the dust pack.

CAUTION

Make sure the ﬁ lter is completely dry before putting it back into the vacuum cleaner.

Allow 12 hours for it to dry.

14_ maintain tools and ﬁ lter

maintain tools and ﬁ lter

CHANGE THE BATTERY (OPTION)

1. When the vacuum cleaner does not work, replace the

batteries. If the problem persists, please contact our

authorized dealer.

2. Use 2 batteries of size AAA.

1. Never disassemble or recharge the batteries.

2. Never heat up the batteries or throw them into ﬁ re.

3. Do not reverse (+), (-) poles.

4. Dispose of the batteries property.

BATTERY TYPE : AAA Size

CLEANING THE OUTLET FILTER

Remove the dust bin and

HEPA Filter as shown.

Put assemble HEPA Filter into the main body.

Clean the HEPA Filter.

Let the HEPA Filter dry in the

shade for more than12 hours.

1

4

23

troubleshooting _15

04 TROUBLESHOOTING

troubleshooting

PROBLEM SOLUTION

Motor does not start

• Check cable, pulg and socket.

• Leave to cool.

Suction force is gradually

decreasing

• Check for blockage and remove.

Cord does not rewind fully • Pull the cord out 2-3m and push down the cord rewind button.

Vacuum cleaner does

not pick up dirt

• Check hose and replace if required.

Low or decreasing suction

• Please check ﬁ lter and, if required, clean as illustrated in the

instructions. if ﬁ lters are out of condition change them to new

ones.

Body overheating

• Please check ﬁ lters, If required clean as illustrated in the

instruction.

Static electicity discharge • Please decrease power suction.

Page is loading ...

Samsung SC9630 Owner's manual

Samsung SC9630 Owner's manual

in other languages

Related papers

Other documents