Roxicosly RO-CR1013-WHITE User manual

Brand
Roxicosly
Model
RO-CR1013-WHITE
Category
Alarm clocks
Type
User manual
- 02 -
Chapter 2 POWERING ON
1. Install 1pcs CR2032 coin cell batteries to the proper terminals in the
battery compartment to memorize the time and alarm setting .
NOTE: Batteries(not included) don't support time display but can back up
time & alarm setting.
2. Connect the adapter line to DC jack , then plug into a 100~240V AC wall
power outlet.
- 01 -
Chapter 1 LOCATION OF CONTROLS
1. Alarm 1 Button 2. Alarm OFF Button 3. Alarm 2 Button
4. Radio Volume - Button 5. FM Radio Button 6. Radio Volume + Button
7. Display Dimmer Button 8. Set Time Button 9. Sunrise Light Button
10.Sleep Button 11. OK & SNOOZE Button 12. Alarm Ringtone Button
13.Alarm Volume Button 14. Alarm Light Intensity Button 15. Sunrise Duration Button
16. USB Charging Port 17. DC IN Port 18. Alarm 1 Indicator
19. Alarm 2 Indicator 20. Time Display 21. Volume Indicator
22. Sunrise Indicator 23. Light Intensity Indicator 24. SNOOZE Indicator
25. Sleep Indicator 26. FM Radio Indicator 27. LED Display Dimmer
28. DST Indicator
1
2
1 2 3 4 5 6
7
11
10
8 9
18
19
20
21 22 23 24 25 26 27
28
12 13 14 15
16 17
Chapter 3 TIME SETTING
1. Press once button, display starts flashing.
2. Rotate button to adjust the hour, Press button
to confirm hour setting.
3. Rotate button to adjust the minute, press button to
confirm minute setting or wait for another 10 seconds to confirm
automatically.
4. Hold press button to change 12/24H time format.
12/24H
12/24H
1. Press button once, the alarm indicator will light up,
the display starts flickering.
2. Rotate button to adjust the hour, Then press button to
confirm hour setting.
3. Rotate button to adjust the minute, Then press button
to confirm minute setting or wait for another 10 seconds to confirm
automatically.
Chapter 4 ALARM SETTING
1 1
ALARM
RINGTONE
ALARM
VOLUME
ALM LIGHT
INTENSITY
SUNRISE
DURATION
+
-
1
2
12 /24 H
DST
ALARM
OFF
SNOOZE
DC I N
+
-
USB CHARGING
5V 1 A
+
Radio
Radio
-
CR1013
Wakeup Alarm Clock
CREATE YOUR PERFECT SLEEP ENVIRONMENT
1
2
Contact our experts
[email protected]
Mad e in China
Http://www.wismco.com
Version 1.0
ROXICOSLY
ALM LIGHT
INTENSITY
Set Alarm Ringtone
Press once button, Display will show the number of music
(including 8 alarm ringtone and 1 FM radio that last time you listiened),
rotate button to select the music which you desire, then press
button to confirm which you select.
Set Alarm Volume
Press once button to set up ring volume(Volume Range:
V1-V15), display will show the value of volume, Rotate button to
adjust volume, then press button to confirm.
Set Alarm Light Intensity
Press once button, display will show default value 25,
Rotate button to select your desired brightness level, then press
button to confirm.
Set Sunrise Duration Time
The dawn duration time is the time in which the light intensity of the lamp
gradually increases to the set level before the alarm sound is played. The
default dawn duration time is 30 minutes, but you can reduce the dawn
duration time to 20 or 25 minutes or increase it to 40 minutes.
Press button to set up draw duration time, display shows
the default time 30 minutes, rotate button to adjust draw duration
time which you desire, then press button to confirm.
Setting ALARM2 is as same as ALARM1.
- 03 -
ALARM
VOLUME
SUNRISE
DURATION
Chapter 6 USB CHARGING
Plug charging cable into device such as phone or tablet.
Then clock can charge your phone or tablet .
The maximum charge current is 1 Ampere.
DST
Press button to adjust the brightness of display to your preference.
Chapter 7 DIMMER
DST
DST
Chapter 7 DST SWITCH
1. Hold press button to light up the indicator .
An hour will be added to the current time on the display.
3. To turn off DST, press button again, the Indicator will
disappear from the display.
Chapter 9 Manual Light Control
This wake up light is both a wake up light and an ordinary luminous light.
1. Press once button to turn on light which gradually increase to the
default 10 level.
2. Rotate button to adjust the brightness of light.
3. Press once button again to turn off light.
ALARM
RINGTONE
Chapter 10 Colorful Light Setting
1. Hold press button to enter the colorful light mode.
2. Rotate button to adjust the color of light.
3. Press button again to turn off colorful light setting.
- 06 -- 05 -
- 04 -
ALARM OFF
Turn off Alarm When alarm goes off:
1. Press button to temporarily turn off alarm for 9 minutes.
Alarm will ring every next 9 minutes.
2. Press button to turn off light for 24 hours, the alarm
indicator will be still on, and alarm will be activated again after 24
hours.
3. To completely turn off the alarm 1, hold press button until the
alarm indicator disappear from the display.
To completely turn off the alarm 2, hold press button until the
alarm indicator disappear from the display.
To completely turn off both the alarm 1 and the alarm 2, hold press
button, the alarm indicator and will
disappear from the display.
1
ALARM OFF
2
Chapter 8 Sleep Mode Setting
1. Press button to enter the sleep mode setting.
2. Display shows the default sleep time 30 minutes, rotate button
to adjust the time which you desire, press button to confirm.
3. Display shows the default light brightness 18 level, rotate
button to adjust the light brightness which you desire, press
button to confirm.
4. Display shows the number of sleep sound(include 5 sleep sounds and 1
FM radio channel that you listened last time) and speaker will play
corresponding music or radio, rotate button to select the music
which you desire, press button to confirm.
5. Press button again to log out sleep mode setting.
Note: The radio channel is the default of channel or you played last time.
Chapter 11 FM Radio
1. Turn ON/OFF
Press button to to turn on FM radio.
Press button again to turn off FM radio.
2. Manual turning the FM channel
After turning on radio, then rotate button to adjust the
frequency of FM.
3. Auto scanning and storage FM channel.
After turning on radio, hold press button to start auto scanning,
it will save FM channel once receive an available FM channel,
the sequence of channel storage is from P01 to P20.
4. Select Presetting FM channel
After turning on radio, hold press button to enter storage FM
channel mode, rotate button to select the storage FM channel
which you desire, wait for 5 seconds to confirm automatically.
5. Radio Volume
After turning on radio, press or button to adjust the
volume of radio.
1
2
2
1
Radio
-
+
Radio
  • Page 1 1
  • Page 2 2

Roxicosly RO-CR1013-WHITE User manual

Brand
Roxicosly
Model
RO-CR1013-WHITE
Category
Alarm clocks
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents