3). Press the ▲▼buttons to select following setting options. Press the OK button and then
press the ◄►buttons to adjust each option’s setting.
Language
OSD Language
Allows you to select your desired On Screen Display language.
Audio Language
Allows you to select your desired audio language. (Available for digital channels if multiple
audio languages are broadcast)
Press the OK button to enter the submenu to select Primary and Secondary audio
language.
Subtitle Language
Allows you to select your desired subtitle language or turn off the subtitle. (Available for
digital channels if multiple subtitle languages are broadcast)
Press the OK button to enter the submenu then use the ◄►buttons to switch On or Off on
Subtitle, select Primary and Secondary subtitle language, and switch On or Off on
Hearing Impaired.
OSD Time
You can select a time that your on-screen menu will be displayed: 5 / 10 / 15 Seconds /
Always. If you select Always, the menu will remain on the screen until you press a button to
remove it.
HBBTV
HbbTV (Hybrid broadcast broadband TV) is a service offered by certain broadcasters and
available only on some digital TV channels. HbbTV delivers interactive television over
broadband Internet.
To use HbbTV please ensure your TV is connected to Internet and HbbTV is switched on.
Link Setup
Allows you to command and control two or more CEC-enabled devices, that are connected
through HDMI, by using only one of the remote controls (e.g. controlling a TV set, set-top box
and DVD player using only the remote control of the TV). CEC also allows individual
CEC-enabled devices to command and control each other without user intervention.
Make sure that your CEC-compliant device is connected to your TV using a HDMI cable and
the correct HDMI input source is selected prior to using this function. (Some HDMI cables
may not support HDMI-CEC functions.)
HDMI - CEC
Allows you to control other CEC enabled devices (connected via HDMI) using your TV
remote control.
HDMI ARC
When HDMI - CEC is set to On, press the ◄►buttons to select On to enable to send audio
to CEC-compliant audio devices or select Off to disable the function.
Auto Power
When HDMI - CEC is set to On, press the ◄►buttons to select On to enable to set
CEC-compliant devices to auto power off.
Auto Standby
When HDMI - CEC is set to On, press the ◄►buttons to select On to enable to set TV auto
power on if an CEC-compliant devices is switch on.
Time
Allows to set the time and date manually or set automatically when receiving a digital signal.
Auto Sync
If Auto Sync is set to On , the time and date will be set from the broadcast signal.
If you want to set the time and date manually, set Auto Sync to Off.
Clock
When Auto Sync is set to Off, press the ▲▼buttons to enter the Clock page. Use the
◄▲▼►buttons set Year / Month / Day / Hour / Minute.
Off Time
Allows you to set the shutdown time. Press the OK button to enter Off Time page. Use the
◄▲▼►buttons set the options: Off Time Mode / Hour / Minute.
On Time
Allows you to set the boot up time. Press the OK button to enter Off Time page. Use the
◄▲▼►buttons set the options: Off Time Mode / Hour / Minute / Source.
12 13