Ibiza Sound DJM160FX-BT Owner's manual

Type
Owner's manual

Ibiza Sound DJM160FX-BT

This affordable 2-channel mixer is perfect for beginners but also offers enough features for advanced mixing. With 16 built-in DSP sound effects such as flanger, phaser, and reverb, it will take your mixes to the next level.

Connect your music sources via Bluetooth, USB, or the traditional line inputs. The integrated MP3 player allows you to play music directly from a USB flash drive. With its intuitive controls and easy-to-use interface, the Ibiza Sound DJM160FX-BT is a great choice for both home and mobile DJing.

Some of the main features include:

  • 2-channel mixer with 16 DSP sound effects

Ibiza Sound DJM160FX-BT

This affordable 2-channel mixer is perfect for beginners but also offers enough features for advanced mixing. With 16 built-in DSP sound effects such as flanger, phaser, and reverb, it will take your mixes to the next level.

Connect your music sources via Bluetooth, USB, or the traditional line inputs. The integrated MP3 player allows you to play music directly from a USB flash drive. With its intuitive controls and easy-to-use interface, the Ibiza Sound DJM160FX-BT is a great choice for both home and mobile DJing.

Some of the main features include:

  • 2-channel mixer with 16 DSP sound effects
©Copyright LOTRONIC 2017 DJM160BT-MKII 2
TOP & REAR PANEL:
©Copyright LOTRONIC 2017 DJM160BT-MKII 3
SAFETY RECOMMENDATIONS
MAGNETIC FIELD
CAUTION! Do not locate sensitive high gain equipment such as preamplifiers or tape decks directly above or below
the unit. This unit has a strong magnetic field which can induce hum into unshielded devices that are located nearby.
The field has strongest spots just above and below the unit. Locate the amplifier at the bottom of the rack and the
preamplifier or other sensitive equipment at the top.
To prevent electric shock, do not remove top or bottom covers.
No user serviceable parts inside.
Refer servicing to qualified servicing personnel.
Disconnect power cord before removing back panel cover to access gain switch.
No naked flame sources, such as lighted candles, should be placed on the
apparatus
The unit should only be used in moderate climates
This unit should be cleaned only with a dry cloth. Avoid solvents or other
cleaning detergents
A minimum distance of 0.5m around the unit must be kept to ensure sufficient ventilation and avoid
overheating
WARNING! To reduce the risk of electric shock, do not expose this equipment to rain or moisture!
The exclamation point triangle is used to alert the user to important operating or maintenance instructions
The lightning bolt triangle is used to alert the user to the risk of electric shock
FEATURES
Professional 2-channel DJ mixer
High-quality MP3 PLAYERSupports MP3
Bluetooth for wireless music streaming
16 types of DSP sound effects
Super-smooth ULTRAGLIDE fades
Extremely low-noise ULN (Ultra Low-Noise) design, like those on professional studio consoles
Controls
1. Mode: Press this button to select the music sources.
2. Play and Pause: Press this button to play or pause the music.
3. Previous: Press this button to play the previous track.
4. Next: Press this button to play the next track.
5. Digital screen
6. USB port to insert the USB flash drive.
7. Line /USB input switch
8. MIC TALKOVER: Allows you to lower the level of the input sources when you use the DJ MIC
We strongly recommend the use of high-grade cables and connectors for the transmission of audio
signals. Inferior quality materials cannot supply acceptable audio quality or corrosion protection.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
GB
©Copyright LOTRONIC 2017 DJM160BT-MKII 4
9. POWER ON switch: turns on the MIXER. The LED will be on when the unit turns on.
10. CHANNEL 1 fader: adjusts the final channel volume.
11. Output Meter: Indicates the levels of left and right Master channels.
12. CHANNEL 2 fader: adjusts the final channel volume.
13/14. CUE button: allows you to monitor the music through the headphones for the selected channel.
15. MIC LEVEL control: adjusts the volume of the microphone signal.
16. The CROSSFADER is used to fade between channels 1 and 2.
17. The LEVEL control determines the volume of the headphones signal.
18. LCD screen
19. TIME: When the TIME function is activated, you can use the jog wheel to adjust the value of the X
parameter (time) of the effect generator.
20. RATIO: When the RATIO function is activated, you can use the jog wheel to adjust the value of the Y
parameter (mix ratio or resonance or feedback) of the effect generator
21. BY BASS: Press this button to choose or cancel DJ effects. When you press this button to choose the
DJ effects, DJ will be displayed. When you press this button again to cancel the DJ effects, BYPASS will be
displayed.
22. 16 DJ effects selector: You can choose among 16 DJ effects: Flanger, Flanger Verb, Phaser, Robot
Flanger, Pitch, Scratch, Analog Delay, Trans, PhaseWah, F ilter, AutoWah, SmallHall, Thinplate, Plate, LPF
Reverb, Gated Reveb.
23 JOG WHEELThis wheel has 2 functions:
In SCRATCH mode
Turn the Effect Selector to N0.6 Effect to activate the scratch function. While in Play mode you
can scratch the track with the Jog Wheel like a vinyl record
In PARAMETER mode
TIME BUTTON ( X parameter) When the TIME function is activated, you can use the jog Wheel to
adjust the value of the X parameter (time) of the effect generators.
RATIO BUTTON (Y parameter) When the RATIO function is activated, you can use the jog Wheel to
adjust the value of the Y parameter (mix ratio or resonance or feedback) of the effect generators.
24. The HEADPHONES socket allows you to connect your headphones for pre-listening (PFL signal). For best
results, use headphones with an impedance rating of at least 32 Ohms
25. The microphone connector is a balanced 1/4” TRS socket for microphone connection.
26. Channel 1 inputs: The LINE inputs may be used for connecting tape decks, CD or MD players etc
27. Channel 2 inputs. The LINE inputs may be used for connecting tape decks, CD or MD players etc.
28. Use the Master output to connect the unit to an amplifier.
In order to avoid power-up thumps, which can damage your loudspeakers, please power up your
amplifier last. There should be no signal present, e.g. no music playing, when you turn on your amp.
In addition, we suggest that you set all volume-related controls to “zero” (down) before powering up
your system. Following these precautions will save you from unpleasant and potentially dangerous
surprises.
29. Power supply: Only use the power adapter provided with the unit to power the unit. When connecting and
disconnecting the power cord, be sure the power of the unit is off. Connect the cord to the rear of the unit and
then connect it to the outlet.
30. BT antenna
31. Power Adaptor (Packed inside the box): AC12V, 500mA
©Copyright LOTRONIC 2017 DJM160BT-MKII 5
BLUETOOTH PAIRING PROCEDURE
1. Press the Mode button (1) on the MP3 player control part
2. Select the BLUETOOTH mode
3. Start the searching procedure on your device
4. Select BT in the list of found devices and connect the mixer to your device
SPECIFICATIONS
AUDIO INPUTS
Mic input ................................................................................... 20mV, unbalanced
Line inputs 1 and 2 ....................................................................... 0.8V, unbalanced
AUDIO OUTPUTS
Main Out ..................................................................................... max. 5V (LINE IN)
Headphones ............................................................... typically 300mW @ 1% THD
GENERAL
Signal-to-noise ratio (S/N) ............................................................................ > 70dB (Line in)
Crosstalk ....................................................................................................... > 50dB (Line in)
Distortion (THD) ........................................................................................................< 0.05%
Frequency response ......................................................................................... 20Hz - 20kHz
Power supply ........................................................ 230V ~, 50Hz via supplied 12Vac adaptor
Power consumption ............................................................................................... max. 4 W
Dimensions (H x W x D) ............................................................... approx. 35 x 250 x 140mm
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities
or your dealer about the way to proceed.
EC Declaration of Conformity
Hereby we, LOTRONIC SA
Avenue Zénobe Gramme, 9
1480 SAINTES
Belgium
+32.2.390.91.91
Certify and declare under our sole responsibility that the following product:
Trade name: IBIZA
Product name: 2 CHANNEL MIXER WITH USB-BT and 16 EFFECTS
Type or model: DJM160FX-BT
Conforms to the essential requirements of the:
RED directive 2014/53/EU
Based on the following specifications applied:
EN 60065: 2014
EN 62479:2010
EN 300328 V1.9.1: 2015
EN 301489-1 V1.9.2: 2011
EN 301489-17 V2.2.1: 2012
Place and date of issue: Saintes (Belgium), on 30/05/2017
LOTRONIC SA
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23

Ibiza Sound DJM160FX-BT Owner's manual

Type
Owner's manual

Ibiza Sound DJM160FX-BT

This affordable 2-channel mixer is perfect for beginners but also offers enough features for advanced mixing. With 16 built-in DSP sound effects such as flanger, phaser, and reverb, it will take your mixes to the next level.

Connect your music sources via Bluetooth, USB, or the traditional line inputs. The integrated MP3 player allows you to play music directly from a USB flash drive. With its intuitive controls and easy-to-use interface, the Ibiza Sound DJM160FX-BT is a great choice for both home and mobile DJing.

Some of the main features include:

  • 2-channel mixer with 16 DSP sound effects

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI