Cisco 3200 Series Software Configuration Manual

Americas Headquarters

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, CA 95134-1706

USA

http://www.cisco.com

Tel: 408 526-4000

800 553-NETS (6387)

Fax: 408 527-0883

Cisco 3200 Series Wireless MIC Software

Configuration Guide

January 2009

Text Part Number: OL-6415-04

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL

STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT

WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.

THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT

SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE

OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.

The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public

NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH

ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR

IMPLIED, INCLUDING, WITHOUT

LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF

DEALING, USAGE, OR TRADE PRACTICE.

IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING,

WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO

OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

CCDE, CCENT, Cisco Eos, Cisco HealthPresence, the Cisco logo, Cisco Lumin, Cisco Nexus, Cisco StadiumVision, Cisco TelePresence, Cisco WebEx, DCE, and Welcome

to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn and Cisco

Store are service marks; and Access Registrar, Aironet, AsyncOS,

Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco

Certified Internetwork Expert logo, Cisco IOS,

Cisco

Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, EtherFast, EtherSwitch, Event Center, Fast Step,

Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, iQuick Study, IronPort, the IronPort

logo, LightStream, Linksys, MediaTone,

MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, Network Registrar, PCNow, PIX, PowerPanels, ProConnect, ScriptShare, SenderBase,

SMARTnet, Spectrum Expert, StackWise, The Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and the WebEx

logo are registered trademarks of

Cisco

Systems, Inc. and/or its affiliates in the United States and certain other countries.

All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply a partnership relationship

between Cisco and any other company. (0812R)

Cisco 3200 Series Wireless MIC Software Configuration Guide

iii

Cisco 3200 Series Wireless MIC Software Configuration Guide

OL-6415-04

CONTENTS

Preface i-xv

Audience i-xv

Purpose i-xv

Organization i-xv

Conventions i-xvii

Related Documentation i-xix

Obtaining Documentation i-xx

Cisco.com i-xx

Product Documentation DVD i-xx

Ordering Documentation i-xx

Documentation Feedback i-xx

Cisco Product Security Overview i-xxi

Reporting Security Problems in Cisco Products i-xxi

Obtaining Technical Assistance i-xxii

Cisco Technical Support & Documentation Website i-xxii

Submitting a Service Request i-xxiii

Definitions of Service Request Severity i-xxiii

Obtaining Additional Publications and Information i-xxiii

Overview of the Cisco WMIC 1-1

Understanding the Cisco Mobile Wireless Network 1-1

Public Safety Wireless Network Example 1-1

Intersection Example 1-3

Vehicle Network Example 1-4

Data Path Example 1-5

Call Setup Process 1-5

Data Flow to and from the Home Network 1-6

Features 1-7

Management Options 1-10

iv

Cisco 3200 Series Wireless MIC Software Configuration Guide

OL-6415-04

Configuring the WMIC for the First Time 2-1

Before You Start 2-1

Connecting to the WMIC 2-1

Using the Console Port to Access the Privileged Exec Mode 2-2

Using a Telnet Session to Access the Privileged Exec Mode 2-2

Opening the CLI with Secure Shell 2-2

Obtaining and Assigning an IP Address 2-3

Assigning an IP Address By Using the Exec 2-3

Protecting Your Wireless LAN 2-4

Configuring Basic Security Settings 2-4

Using VLANs 2-4

Express Security Types 2-5

CLI Security Configuration Examples 2-6

Example: No Security 2-6

Example: Static WEP 2-6

Example: EAP Authentication 2-7

Example: WPA 2-8

Roles and the Associations of Wireless Devices 3-1

Understanding Wireless Device Network Roles 3-1

Access Point Role 3-2

Bridge Role 3-2

Point-to-Point Bridging 3-3

Point-to-Multipoint Bridging 3-4

Redundant Bridging 3-5

Workgroup Bridge Role 3-6

Universal Workgroup Bridge (2.4-GHz Radios Only) 3-8

Configuring Universal Workgroup Bridge on a Cisco 3200 3-11

Assigning Dynamic MAC address for Universal Workgroup Bridge 3-12

World Mode (2.4 GHz Radio Only) 3-12

Supported Country Codes 3-13

Additional Information 3-18

Administering the WMIC 4-1

Configuring a System Name and Prompt 4-1

Configuring a System Name 4-1

Managing DNS 4-2

v

Cisco 3200 Series Wireless MIC Software Configuration Guide

OL-6415-04

Default DNS Configuration 4-2

Setting Up DNS 4-2

Displaying the DNS Configuration 4-3

Creating a Banner 4-3

Default Banner Configuration 4-4

Configuring a Message-of-the-Day Login Banner 4-4

Configuring a Login Banner 4-5

Protecting Access to Privileged EXEC Commands 4-5

Default Password and Privilege Level Configuration 4-6

Setting or Changing a Static Enable Password 4-6

Protecting Enable and Enable Secret Passwords with Encryption 4-7

Configuring Username and Password Pairs 4-9

Configuring Multiple Privilege Levels 4-10

Setting the Privilege Level for a Command 4-10

Logging Into and Exiting a Privilege Level 4-11

Protecting the Wireless LAN 4-11

Using VLANs 4-11

Express Security Types 4-12

Security Configuration Examples 4-14

Configuring and Enabling RADIUS 4-19

Understanding RADIUS 4-19

RADIUS Operation 4-20

Controlling WMIC Access with RADIUS 4-21

Identifying the RADIUS Server Host 4-21

Configuring RADIUS Login Authentication 4-24

Defining AAA Server Groups 4-25

Configuring RADIUS Authorization for User Privileged Access and Network Services 4-27

Starting RADIUS Accounting 4-28

Configuring Settings for All RADIUS Servers 4-28

Configuring the Bridge to Use Vendor-Specific RADIUS Attributes 4-29

Configuring the Bridge for Vendor-Proprietary RADIUS Server Communication 4-30

Displaying the RADIUS Configuration 4-31

Controlling WMIC Access with TACACS+ 4-32

Understanding TACACS+ 4-32

TACACS+ Operation 4-33

Default TACACS+ Configuration 4-33

vi

Cisco 3200 Series Wireless MIC Software Configuration Guide

OL-6415-04

Configuring TACACS+ Login Authentication 4-34

Identifying the TACACS+ Server Host and Setting the Authentication Key 4-34

Configuring TACACS+ Login Authentication 4-35

Configuring TACACS+ Authorization for Privileged EXEC Access and Network Services 4-36

Starting TACACS+ Accounting 4-37

Displaying the TACACS+ Configuration 4-38

Configuring the WMIC for Local Authentication and Authorization 4-38

Configuring the WMIC for Secure Shell 4-39

Understanding SSH 4-39

Configuring SSH 4-40

Managing Aironet Extensions 4-40

Managing the System Time and Date 4-41

Understanding the System Clock 4-41

Understanding Network Time Protocol 4-41

Configuring Time and Date Manually 4-44

Setting the System Clock 4-44

Displaying the Time and Date Configuration 4-44

Configuring the Time Zone 4-45

Configuring Summer Time (Daylight Saving Time) 4-46

Configuring NTP 4-47

Default NTP Configuration 4-47

Configuring NTP Authentication 4-47

Configuring NTP Associations 4-49

Configuring NTP Broadcast Service 4-50

Configuring NTP Access Restrictions 4-52

Disabling NTP Services on a Specific Interface 4-53

Configuring the Source IP Address for NTP Packets 4-54

Displaying the NTP Configuration 4-54

Radio Channel and Transmit Frequency Configuration 5-1

Understanding Radio Channels and Frequencies 5-1

Determining the Radio Type 5-2

Configuring a Channel or Frequency 5-2

Configuring the Radio Channel or Frequency 5-2

Configuring the Radio Channel Spacing 5-3

Additional Information 5-3

vii

Cisco 3200 Series Wireless MIC Software Configuration Guide

OL-6415-04

Radio Channel Frequencies 6-1

IEEE 802.11n (2.4-GHz Band) 6-1

IEEE 802.11n (5-GHz Band) 6-2

IEEE 802.11b (2.4-GHz Band) 6-3

IEEE 802.11g (2.4-GHz Band) 6-4

IEEE 802.11a (5-GHz Band) 6-5

4.9 GHz (public safety) Channels and Frequencies 6-6

Dynamic Frequency Selection 7-1

Understanding Dynamic Frequency Selection 7-1

DFS Actions 7-2

Dynamic Frequency Selection Channels 7-2

Configuring a Preferred Channel 7-3

Configuring Radar Detection By Clients 7-4

Configuring an SNMP Trap for Radar Detection 7-4

Additional Information 7-5

Radio Transmit Power 8-1

Understanding Radio Transmit Power 8-1

Determine the Radio Type 8-2

Configuring Radio Transmit Power 8-2

Configuring Client Radio Transmit Power 8-3

Maximum Power Levels and Antenna Gains 8-4

IEEE 802.11g (2.4 GHz Band) 8-4

Configuring Radio Data Rates 8-5

speed Command 8-6

speed Command Examples 8-7

Verify Settings 8-8

Multiple Client Profiles 9-1

MCP Support in the 12.3(8)JK Release 9-1

MCP Support in 12.4(3)JK and Later Releases 9-1

Setting Priority in 12.4(3)JK and Later Releases 9-2

Dynamic Channel Width (4.9GHz WMIC only) 9-2

Configuring a WMIC for MCP (12.4(3)JK or Later Releases) 9-3

Configuration Examples 9-4

viii

Cisco 3200 Series Wireless MIC Software Configuration Guide

OL-6415-04

Configuring a WMIC for MCP (12.3(8)JK Only) 9-5

Configuration Examples 9-6

Service Set Identifiers 10-1

Understanding SSIDs 10-1

Configuring the SSID 10-2

Creating an SSID 10-2

Configuring Any SSID 10-3

Configuring Multiple Basic SSIDs 10-3

Requirements for Configuring Multiple BSSIDs 10-3

Guidelines for Using Multiple BSSIDs 10-4

CLI Configuration Example 10-4

Displaying Configured BSSIDs 10-4

Cipher Suites and WEP 11-1

Understanding Cipher Suites and WEP 11-1

Configuring Cipher Suites 11-2

Configuring WEP 11-2

Configuring WEP with 12.4(3)JK or Later Releases 11-2

Configuring WEP with 12.3(8)JK or Earlier Releases 11-3

WEP Key Restrictions 11-4

Example WEP Key Setup 11-4

Enabling Cipher Suite 11-5

Enabling Cipher Suite with 12.4(3)JK or Later Releases 11-5

Enabling Cipher Suite with 12.3(8)JK or Earlier Releases 11-7

Matching Cipher Suites with WPA 11-8

Spanning Tree Protocol in a Wireless Environment 1-1

Understanding Spanning Tree Protocol 1-1

STP Overview 1-2

STP Support 1-2

Bridge Protocol Data Units 1-3

Election of the Spanning-Tree Root 1-4

Spanning-Tree Timers 1-4

Creating the Spanning-Tree Topology 1-4

Spanning-Tree Interface States 1-5

Blocking State 1-6

Listening State 1-7

ix

Cisco 3200 Series Wireless MIC Software Configuration Guide

OL-6415-04

Learning State 1-7

Forwarding State 1-7

Disabled State 1-7

Configuring STP Features 1-8

Default STP Configuration 1-8

Configuring STP Settings 1-8

STP Configuration Examples 1-9

Root Bridge Without VLANs 1-9

Non-Root Bridge Without VLANs 1-10

Root Bridge with VLANs 1-11

Non-Root Bridge with VLANs 1-12

Displaying Spanning-Tree Status 1-14

Cisco Discovery Protocol 2-1

Understanding CDP 2-1

Configuring CDP 2-1

Default CDP Configuration 2-2

Configuring the CDP Characteristics 2-2

Disabling and Enabling CDP 2-2

Disabling and Enabling CDP on an Interface 2-3

Monitoring and Maintaining CDP 2-4

Authentication Types 3-1

Understanding Authentication Types 3-1

Open Authentication to the WMIC 3-2

Shared Key Authentication to the WMIC 3-2

EAP Authentication to the Network 3-3

EAP-TLS 3-5

EAP-FAST 3-5

EAP-TTLS 3-5

MAC Address Authentication to the Network 3-6

Using CCKM Key Management 3-6

Using WPA Key Management 3-6

Configuring Certificates Using the crypto pki CLI 3-7

Configuration Using the Cut and Paste Method 3-7

Configuration Using the TFTP Method 3-11

Configuration Using SCEP 3-12

x

Cisco 3200 Series Wireless MIC Software Configuration Guide

OL-6415-04

Adding the Trustpoint to the dot1x Credentials 3-14

Configuring Authentication Types 3-15

Default Authentication Settings 3-15

Assigning Authentication Types to an SSID 3-16

Configuring Up 2.4 the WMIC Radio as an EAP Client 3-19

Setting Up a Non-Root Bridge as a LEAP Client for 4.9 WMIC Radios 3-21

Configuring the Root Device to Interact with the WDS Device 3-23

Configuring Additional WPA Settings 3-23

Configuring Authentication Holdoffs, Timeouts, and Intervals 3-24

Matching Authentication Types on Root Devices and Non-Root Bridges 3-25

QoS in a Wireless Environment 4-1

Understanding QoS for Wireless LANs 4-1

QoS for Wireless LANs Versus QoS on Wired LANs 4-2

Impact of QoS on a Wireless LAN 4-2

Precedence of QoS Settings 4-3

Using Wi-Fi Multimedia Mode 4-3

Configuring QoS 4-4

QoS Configuration Examples 4-4

QoS Example Configuration for VLAN 4-4

QoS Example of IP DSCP and IP Precedence 4-5

Configuring VLANs 5-1

Understanding VLANs 5-1

Related Documents 7-7

WIMIC Troubleshooting 8-1

Checking the LED Indicators 8-1

Checking Basic Settings 8-3

SSID 8-3

WEP Keys 8-3

Security Settings 8-3

Resetting to the Default Configuration 8-3

Using the CLI 8-4

Reloading the Image 8-5

Obtaining the Image Files 8-7

Obtaining TFTP Server Software 8-7

Reloading the Bootloader Image 8-7

Error and Event Messages 8-8

Filters 9-1

Understanding Filters 9-1

Configuring Filters 9-2

Simple Network Management Protocol 10-1

Understanding SNMP 10-1

SNMP Versions 10-2

xii

Cisco 3200 Series Wireless MIC Software Configuration Guide

OL-6415-04

SNMP Manager Functions 10-2

SNMP Agent Functions 10-3

SNMP Community Strings 10-3

Using SNMP to Access MIB Variables 10-3

Configuring SNMP 10-4

Default SNMP Configuration 10-4

Enabling the SNMP Agent 10-4

Configuring Community Strings 10-4

Configuring Trap Managers and Enabling Traps 10-6

Setting the Agent Contact and Location Information 10-9

Using the snmp-server view Command 10-9

SNMP Examples 10-9

Displaying SNMP Status 10-10

Maximum Power Levels 11-1

IEEE 802.11g (2.4-GHz Band) 11-1

Supported MIBs 12-1

MIB List 12-1

Using FTP to Access the MIB Files 12-2

Protocol Filters 13-1

WDS, Fast Secure Roaming, and Radio Management 14-1

Understanding WDS 14-1

Role of the WDS Access Point 14-2

Role of Access Points Using the WDS Access Point 14-2

Understanding Fast Secure Roaming 14-2

Understanding Radio Management 14-4

Configuring WDS and Fast Secure Roaming 14-4

Guidelines for WDS 14-4

Requirements for WDS and Fast Secure Roaming 14-5

Configuring the WMIC to use the WDS Access Point 14-5

Configuring the Authentication Server to Support Fast Secure Roaming 14-5

Using CLI Commands to Enable the WDS Server 14-9

Using CLI Commands to Enable the Root Device 14-10

Viewing WDS Information 14-11

Using Debug Messages 14-11

xiii

Cisco 3200 Series Wireless MIC Software Configuration Guide

OL-6415-04

Using CLI Commands to Enable Roaming 14-12

Management Frame Protection 15-1

Understanding Management Frame Protection 15-1

Protection of Unicast Management Frames 15-2

Protection of Broadcast Management Frames 15-2

Client MFP For Access Points in Root mode 15-2

Configuring Client MFP 15-2

Configuring Infrastructure MFP 15-3

G

LOSSARY

I

NDEX

xiv

Cisco 3200 Series Wireless MIC Software Configuration Guide

OL-6415-04

xv

Cisco 3200 Series Wireless MIC Software Configuration Guide

OL-6415-04

Preface

Audience

This guide is for the networking professional who installs and manages Cisco 3200 Series wireless and

mobile routers. To use this guide, you should have experience working with the Cisco IOS and be

familiar with the concepts and terminology of wireless local area networks.

Purpose

This guide provides the information you need to install and configure your bridge. This guide provides

procedures for using the IOS commands that have been created or changed for use with the WMIC. It

does not provide detailed information about these commands. For detailed information about these

commands, refer to the IOS documentation set available from the Cisco.com home page at Service and

Support > Technical Documents. On the Cisco Product Documentation home page, select Release 12.3

from the Cisco IOS Software drop-down list.

This guide includes an overview of the web-based interface, which contains all the funtionality of the

command-line interface (CLI). This guide does not provide field-level descriptions of the web-based

windows nor does it provide the procedures for configuring the WMIC from the web-based interface.

For all window descriptions and procedures, refer to the online help, which is available from the Help

buttons on the web-based interface pages.

Organization

This guide is a collection of these documents:

“Overview of the Cisco WMIC” lists the software and hardware features of the WMIC and describes the

WMIC’s role in your network.

“Configuring the WMIC for the First Time” describes how to configure basic settings on a Wireless

Mobile Interface Card (WMIC) for the first time.

“Roles and the Associations of Wireless Devices” describes the roles Cisco WMICs can be assigned and

how the role of a device affects its ability to associate or not associate with other wireless devices.

“Administering the WMIC” describes how to perform one-time operations to administer your WMIC,

such as preventing unauthorized access to the device, setting the system date and time, and setting the

system name and prompt.

xvi

Cisco 3200 Series Wireless MIC Software Configuration Guide

OL-6415-04

Preface

Organization

“Radio Channel and Transmit Frequency Configuration” describes how to configure settings for the

WMIC radio such as the role in the radio network.

“Radio Channel Frequencies” identifiers, channel center frequencies, and regulatory domains of each

IEEE 802.11 radio.

“Dynamic Frequency Selection” describes how radios passively scan for and select the least-congested

channel.

“Radio Transmit Power” describes how to manage radio transmit power.

“Multiple Client Profiles” describes how to configure multiple client profiles on the WMIC.

“Service Set Identifiers” describes how to configure and manage multiple service set identifiers (SSIDs).

You can configure up to 16 SSIDs and assign different configuration settings to each SSID.

“Cipher Suites and WEP” describes how to configure the cipher suites required to use authenticated key

management, Wired Equivalent Privacy (WEP), and WEP features including MIC, CMIC, TKIP, CKIP,

and broadcast key rotation.

“Spanning Tree Protocol” descibes how to configure Spanning Tree Protocol (STP). STP prevents data

loops in your network.

“Cisco Discovery Protocol” describes how to configure Cisco Discovery Protocol (CDP) on your

WMIC. CDP is a device-discovery protocol that runs on all Cisco network equipment.

“Authentication Types” describes how to configure authentication types. Client devices use these

authentication methods to join your network.

“QoS in a Wireless Environment” describes how to configure quality of service (QoS) on your WMIC.

With this feature, you can provide preferential treatment to certain traffic at the expense of others.

“Configuring VLANs” describes how to configure your WMIC to interoperate with the VLANs set up

on your wired LAN.

“System Message Logging” describes how to configure system message logging on your WMIC.

“Tunnel Templates” describes how a a mobile router to carry multicast sessions to mobile networks as

it roams.

“WIMIC Troubleshooting” describes basic troubleshooting procedures, and lists the error and event

messages.

“Maximum Power Levels” lists the radio channels and the maximum power levels supported by the

world’s regulatory domains.

“Supported MIBs” lists the Simple Network Management Protocol (SNMP) Management Information

Bases (MIBs) that the WMIC supports.

“Filters” lists some of the protocols that you can filter on the WMIC.

“Simple Network Management Protocol” describes how to configure the Simple Network Management

Protocol (SNMP) on your WMIC.

“WDS, Fast Secure Roaming, and Radio Management” describes Wireless Domain Services (WDS), fast

secure roaming, and radio management features. The chapter also provides instructions for configuring

the WMIC to register with a WDS access point.

xvii

Cisco 3200 Series Wireless MIC Software Configuration Guide

OL-6415-04

Preface

Conventions

This publication uses these conventions to convey instructions and information:

Command descriptions use these conventions:

• Commands and keywords are in boldface text.

• Arguments for which you supply values are in italic.

• Square brackets ([ ]) mean optional elements.

• Braces ([ ]) group required choices, and vertical bars ( | ) separate the alternative elements.

• Braces and vertical bars within square brackets ([{ | }]) mean a required choice within an optional

element.

Interactive examples use these conventions:

• Terminal sessions and system displays are in screen font.

• Information you enter is in boldface screen font.

• Non printing characters, such as passwords or tabs, are in angle brackets (< >).

Notes, cautions, and timesavers use these conventions and symbols:

Tip Means the following will help you solve a problem. The tips information might not be troubleshooting

or even an action, but could be useful information.

Note Means reader take note. Notes contain helpful suggestions or references to materials not contained in

this manual.

Caution Means reader be careful. In this situation, you might do something that could result equipment damage

or loss of data.

Warning

This warning symbol means danger. You are in a situation that could cause bodily injury. Before you

work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar

with standard practices for preventing accidents. (To see translations of the warnings that appear

in this publication, refer to the appendix “Translated Safety Warnings.”)

Waarschuwing

Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan

veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij

elektrische schakelingen betrokken risico’s en dient u op de hoogte te zijn van standaard

maatregelen om ongelukken te voorkomen. (Voor vertalingen van de waarschuwingen die in deze

publicatie verschijnen, kunt u het aanhangsel “Translated Safety Warnings” (Vertalingen van

veiligheidsvoorschriften) raadplegen.)

xviii

Cisco 3200 Series Wireless MIC Software Configuration Guide

OL-6415-04

Preface

Conventions

Varoitus

Tämä varoitusmerkki merkitsee vaaraa. Olet tilanteessa, joka voi johtaa ruumiinvammaan. Ennen

kuin työskentelet minkään laitteiston parissa, ota selvää sähkökytkentöihin liittyvistä vaaroista ja

tavanomaisista onnettomuuksien ehkäisykeinoista. (Tässä julkaisussa esiintyvien varoitusten

käännökset löydät liitteestä "Translated Safety Warnings" (käännetyt turvallisuutta koskevat

varoitukset).)

Attention

Ce symbole d’avertissement indique un danger. Vous vous trouvez dans une situation pouvant

entraîner des blessures. Avant d’accéder à cet équipement, soyez conscient des dangers posés par

les circuits électriques et familiarisez-vous avec les procédures courantes de prévention des

accidents. Pour obtenir les traductions des mises en garde figurant dans cette publication, veuillez

consulter l’annexe intitulée «

Translated Safety Warnings » (Traduction des avis de sécurité).

Warnung

Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu einer

Körperverletzung führen könnte. Bevor Sie mit der Arbeit an irgendeinem Gerät beginnen, seien Sie

sich der mit elektrischen Stromkreisen verbundenen Gefahren und der Standardpraktiken zur

Vermeidung von Unfällen bewußt. (Übersetzungen der in dieser Veröffentlichung enthaltenen

Warnhinweise finden Sie im Anhang mit dem Titel “Translated Safety Warnings” (Übersetzung der

Warnhinweise).)

Avvertenza

Questo simbolo di avvertenza indica un pericolo. Si è in una situazione che può causare infortuni.

Prima di lavorare su qualsiasi apparecchiatura, occorre conoscere i pericoli relativi ai circuiti

elettrici ed essere al corrente delle pratiche standard per la prevenzione di incidenti. La traduzione

delle avvertenze riportate in questa pubblicazione si trova nell’appendice, “Translated Safety

Warnings” (Traduzione delle avvertenze di sicurezza).

Advarsel

Dette varselsymbolet betyr fare. Du befinner deg i en situasjon som kan føre til personskade. Før du

utfører arbeid på utstyr, må du være oppmerksom på de faremomentene som elektriske kretser

innebærer, samt gjøre deg kjent med vanlig praksis når det gjelder å unngå ulykker. (Hvis du vil se

oversettelser av de advarslene som finnes i denne publikasjonen, kan du se i vedlegget "Translated

Safety Warnings" [Oversatte sikkerhetsadvarsler].)

Aviso

Este símbolo de aviso indica perigo. Encontra-se numa situação que lhe poderá causar danos

fisicos. Antes de começar a trabalhar com qualquer equipamento, familiarize-se com os perigos

relacionados com circuitos eléctricos, e com quaisquer práticas comuns que possam prevenir

possíveis acidentes. (Para ver as traduções dos avisos que constam desta publicação, consulte o

apêndice “Translated Safety Warnings” - “Traduções dos Avisos de Segurança”).

¡Advertencia!

Este símbolo de aviso significa peligro. Existe riesgo para su integridad física. Antes de manipular

cualquier equipo, considerar los riesgos que entraña la corriente eléctrica y familiarizarse con los

procedimientos estándar de prevención de accidentes. (Para ver traducciones de las advertencias

que aparecen en esta publicación, consultar el apéndice titulado “Translated Safety Warnings.”)

Varning!

Denna varningssymbol signalerar fara. Du befinner dig i en situation som kan leda till personskada.

Innan du utför arbete på någon utrustning måste du vara medveten om farorna med elkretsar och

känna till vanligt förfarande för att förebygga skador. (Se förklaringar av de varningar som

förekommer i denna publikation i appendix "Translated Safety Warnings" [Översatta

säkerhetsvarningar].)

xix

Cisco 3200 Series Wireless MIC Software Configuration Guide

OL-6415-04

Preface

Related Documentation

You can access these documents on the Documentation page on Cisco Connection Online (CCO) at

www.cisco.com. The following documentation is available at the

http://www.cisco.com/en/US/products/hw/routers/ps272/tsd_products_support_series_home.html

URL:

• Release Notes for the Cisco 3200 Series Mobile Access Routers—Provides information on accessing

documentation and technical assistance for the Cisco

3200 Series wireless and mobile router.

• Cisco IOS Command Reference for Cisco Access Points and Bridges

1

—New and revised Cisco IOS

commands for the radio ports provided on the Wireless Mobile Interface Card (WMIC).

• Cisco 3200 Series Wireless MIC Software Configuration Guide

1

—Example procedures for using the

IOS commands to configure the Wireless Mobile Interface Card (WMIC).

• Configuration Guide for the Cisco 3200 Series Mobile Access Router

1

—Example procedures for

using the IOS commands to configure assembled Cisco

3200 Series routers.

• Cisco 3200 Series Mobile Access Router Hardware Reference

1

—This document. It provides

descriptions of the Cisco MIC I/O cards found in Cisco

3200 Series routers.

• Cisco 3200 Series Mobile Access Router Reference Sell Document

1

—An overview of the reference

sell program and components for the Cisco

3200 Series router.

The Release Notes for the Cisco 3250 Mobile Router lists the enhancements to and caveats for Cisco IOS

releases as they relate to the Cisco

3200 Series router can be found at:

http://www.cisco.com/en/US/products/sw/iosswrel/products_ios_cisco_ios_software_releases.html or

http://www.cisco.com/en/US/products/sw/iosswrel/ps5012/prod_ios_releases_home.html

1.

Also available on the platform-specific CD-ROM.

This feature adds support for RFC 2006 Set operations and security violation traps. For specifications,

see RFC

2006, The Definitions of Managed Objects for IP Mobility Support Using SMIv2.

For information about using Cisco IOS software to configure SNMP, refer to the following documents:

• The “Configuring SNMP Support” chapter of the Cisco IOS Configuration Fundamentals

Configuration Guide, Release 12.2

• The “SNMP Commands” chapter of the Cisco IOS Configuration Fundamentals Command

Reference, Release 12.2

For information about using Cisco IOS software to configure SNMP MIB features, refer to the

appropriate documentation for your network management system.

For information on configuring Mobile IP using Cisco IOS software, refer to the following documents:

• The “Configuring Mobile IP” chapter of the Cisco IOS IP Configuration Guide, Release 12.2

• The “Mobile IP Commands” chapter of the Cisco IOS IP Command Reference, Volume 1 of 3:

Addressing and Services, Release 12.2

Related documents from the Cisco TAC Web pages include:

• Antenna Cabling (http://www.cisco.com/warp/public/102/wlan/antcable.html)

xx

Cisco 3200 Series Wireless MIC Software Configuration Guide

OL-6415-04

Preface

Obtaining Documentation

Cisco documentation and additional literature are available on Cisco.com. Cisco also provides several

ways to obtain technical assistance and other technical resources. These sections explain how to obtain

technical information from Cisco Systems.

Cisco.com

You can access the most current Cisco documentation at this URL:

http://www.cisco.com/techsupport

You can access the Cisco website at this URL:

http://www.cisco.com

You can access international Cisco websites at this URL:

http://www.cisco.com/public/countries_languages.shtml

Product Documentation DVD

The Product Documentation DVD is a comprehensive library of technical product documentation on a

portable medium. The DVD enables you to access multiple versions of installation, configuration, and

command guides for Cisco hardware and software products. With the DVD, you have access to the same

HTML documentation that is found on the Cisco website without being connected to the Internet.

Certain products also have .PDF versions of the documentation available.

The Product Documentation DVD is available as a single unit or as a subscription. Registered Cisco.com

users (Cisco direct customers) can order a Product Documentation DVD (product number

DOC-DOCDVD= or DOC-DOCDVD=SUB) from Cisco Marketplace at this URL:

http://www.cisco.com/go/marketplace/

Ordering Documentation

Registered Cisco.com users may order Cisco documentation at the Product Documentation Store in the

Cisco Marketplace at this

URL:

http://www.cisco.com/go/marketplace/

Nonregistered Cisco.com users can order technical documentation from 8:00 a.m. to 5:00 p.m.

(0800

to 1700) PDT by calling 1 866 463-3487 in the United States and Canada, or elsewhere by

calling

011 408 519-5055. You can also order documentation by e-mail at

tech-doc-store-mkpl@external.cisco.com or by fax at 1 408 519-5001 in the United States and Canada,

or elsewhere at 011 408 519-5001.

Documentation Feedback

You can rate and provide feedback about Cisco technical documents by completing the online feedback

form that appears with the technical documents on Cisco.com.

Page is loading ...

Cisco 3200 Series, C3201FESMIC-TP= - 3201 Fast EN Switch Mobile Interface Card Expansion Module, C3230ASY-KIT= - 3200 Series Rugged Enclosure Assembly, C3230ENC-1WMIC-K9 - 3230 Router, C3270ENC-K9 Software Configuration Manual

Related papers

Other documents