2. Insignia
  3. NS-APPF168

Insignia NS-APPF168 Quick setup guide

  • Hello! I am an AI chatbot trained to assist you with the Insignia NS-APPF168 Quick setup guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Before using your new product, please read these instructions to prevent any damage.
REPLACING THE PREFILTER
The lter indicator ashes blue after 1500 hours of use to remind you to replace the used lter
with a new Insignia pre-lter (NS-APPF168).
1 Turn o your air purier, then unplug it.
2 Remove the air inlet grill by pulling it out (A), then remove the used pre-lter from the air inlet grill (B).
3 Install a new Insignia pre-lter (NS-APPF168) on the air inlet grill (C), then reattach the grill (D).
UNDERSTANDING THE FILTER INDICATOR
FILTER INDICATOR MEANING
Green LED Normal operation.
Blue LED ash Check and replace the pre-lter.
Red LED ash Check and replace the HEPA lter.
Blue/red LED ash Check and replace both lters.
Note: There is a sticker on your air purier to remind you what each color indicates.
Pre-lter
Pre-lter
QUICK SETUP GUIDE
Pre-Filter
NS-APPF168
PACKAGE CONTENTS
• Pre-Filter
• Quick Setup Guide
C
D
V1 ENGLISH 17-0789
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 877-467-4289 (U.S. and
Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2017 Best Buy. All rights reserved.
Made in China
PROBLEM SOLUTION
TROUBLESHOOTING
SPECIFICATIONS
Pre-lter dimensions (H×W×D) 10.3 × 5.1 × .2 in. (26.2 × 13.0 × .5 cm)
Operating temperature 40~110°F (4~43°C)
Coverage area 108.0 sq. ft. (10.0 m)
Pre-lter lifetime 1500 hours
Pre-lter technology Activated carbon mesh
• Make sure that your air purier is plugged in.
• Make sure that the power outlet is working.
• Make sure that your air purier is turned on.
• If your air purier is plugged into a surge protector, make sure that it is turned on.
• Make sure that nothing is blocking the air inlet and ltered air outlet. Position your air purier
at least one foot (.3 meters) away from walls or large objects.
• Check the condition of the lters. Replace them if they are dirty.
• Remove the plastic bag from the HEPA lter.
• Make sure the lters are seated properly.
• Excessive amounts of pet dander, dust, or smoke may decrease the life expectancy of the lter.
• When the lter indicator LED ashes blue, you need to check and replace your pre-lter.
• When the lter indicator LED ashes red, you need to check and replace your HEPA lter.
• When the lter indicator LED ashes blue and red, you need to check and replace both lters.
My air purier does not work.
My air purier has poor air ow or is loud.
My pre-lter does not last the full 1500 hours.
My lter indicator is ashing
blue and/or red.
/