1. Fill the mirror’s water reservoir with warm water from
your shower.
2. Place mirror at desired height on mounting bracket.
3. If mirror begins to fog, replace water reservoir with
warm water when a longer shave is required.
TURNING THE LIGHT ON/OFF
1. To turn light on, simply press the POWER BUTTON
at the base of the mirror.
2. The light will automatically turn o after 5 minutes.
Press the POWER BUTTON again to turn the light o
before the 5 minutes have expired.
CHARGING THE UNIT
DO NOT CHARGE IN THE SHOWER.
DO NOT CHARGE WHEN WET.
1. The BLUE LED will ash when unit needs charging.
2. Insert the included Micro USB Charging Cord into
a power source such as a USB wall adapter (not
included).
3. Once plugged in, the RED LED will blink to indicate
charging.
4. When the RED LED stops blinking, your mirror is
fully charged.
DANGER/WARNING
To reduce the risk of burns, re, electric shock, or
injury to persons:
• Be sure the mirror is not in a position where it can
reect sunlight. Reected light can cause re.
• Close supervision is necessary when this mirror is used
by or near children or disabled persons.
• Use this mirror only for its intended use as described in
this manual. Do not use attachments not recommended
by the manufacturer.
CARE AND MAINTENANCE
1. Use included squeegee to clean mirror.
2. Some showers will leave water spots on mirror
surface. This is normal, simply clean the mirror
surface with a soft cloth.
3. To avoid water spots, position mirror in an area
without water over-spray from shower.
4. Water will drain from the bottom of the water mirror.
Do not obstruct water drainage.
1 Year Limited Warranty
Zadro products include a 1 Year limited warranty from date
of purchase against defects in materials and workmanship.
This warranty does not include damage to the product as a
result of misuse or accident.
Should your product become defective during the warranty
period, Zadro Products, Inc.™ will repair or replace (at our
sole discretion) your product, at no charge. However, you
are responsible for properly packing your product and any
applicable shipping charges to Zadro Products, Inc.™
Please contact our Customer Service at 800-468-4348,
how to obtain an RMA (return authorization number). Please
have available and/or include a copy of your receipt, model
number (ZWTAR20S) and the issue you are experiencing
with your product.
CUSTOMERS OUTSIDE THE UNITED STATES OF AMERICA,
PLEASE CONTACT THE RETAILER OF PURCHASE DIRECTLY
TO RESOLVE ANY PRODUCT WARRANTY ISSUES.
Any product returned for preference is subject to a 20%
restocking fee of the product and no shipping charges will
be refunded.
Zadro Products, Inc.™ shall not be liable for any incidental
or consequential damages arising out of defects in this
product, whether or not caused by its negligence.
Some states do not allow the exclusion or limitation of
incidental or consequential damages or allow limitations on
how long an implied warranty lasts, so the above limitations
or exclusions may not apply to you. This warranty gives you
specic legal rights and you may also have other rights,
which vary from state to state.
Thank you for your purchase! Please visit us
online to leave comments, reviews, & see more
exciting new products from www.ZadroInc.com
© Zadro Products, Inc.
TM
Huntington Beach, CA
Phone: (714) 892-9200
Fax: (714) 892-7477
Website: www.ZadroInc.com
ZWTAR20S
Z’Fogless LED Lighted
Rechargeable Shaving Mirror
ZADRO®
Z’Fogless LED Lighted
Rechargeable Shaving Mirror
Model No. ZWTAR20S
READ ALL INSTRUCTIONS BEFORE USE
FEATURES
Bright LED lighting evenly illuminates your entire face.
Adjust the mirror to your exact height preference with the
included wall mounting bracket. And you never forget to
switch o the mirror thanks to its 5 minute auto-o timer.
• Touch Control (on/o)
• Directional LED Light
• 5 Minute Auto-O Timer for LED Lights
• Rechargeable Lithium Battery
• NEW Patent Pending Fogless Water Mirror
Technology
• Squeegee for Wiping Overspray
• Mounting Bracket for mirror height adjustability
MOUNTING THE MIRROR
READ BEFORE MOUNTING
The mounting tape will adhere strongly on rst placement,
so before sticking the bracket to the wall, test placement
to make sure it will be in the right place to match your
usage height.
1. Clean the surface by rinsing and letting dry, then
wiping with rubbing alcohol. (Recommended)
2. Select a mounting area in your shower free of
overspray. To keep the mirror straight, shower tiles
can be used to align the mounting bracket.
3. Press the tape rmly to the mounting bracket.
4. Keeping in mind that the mirror can adjust up and
down almost 12 inches, mount toward middle usage
at eye level and then press the tape rmly to the wall.
5. With mounting bracket attached to the wall, place
mirror at desired height on mounting bracket.
FOG FREE MIRROR USE
Water
Reservoir
Step 1 Step 2
Important Safety Instructions
Rev. 05172019
Important Safety Instructions