LabGruppen LUCIA 120/1-70 Quick start guide

Type
Quick start guide
Print: black pantone
PRINT AND CUTLINE :
B : USE M5X30mm SCREW SUPPLIED WITH PRODUCT ACCESSORIES
B : USE M5X45mm SCREW SUPPLIED WITH PRODUCT ACCESSORIES
CUT LINE
OR
M10009-A
1303 - AMO , Pole Mount, Quick Start Guide
size: A4 297mmx210mm White paper 65 grams
E60540611
A
B
A : USE M4X5.5mm SCREW SUPPLIED WITH PRODUCT ACCESSORIES
A
B
INSTALLATION OF POLE MOUNT SOLUTION 1
ATTENTION: Use only the screws supplied with the Lucia Pole Mount to avoid damage to the unit.
ATTENTION: The maximum load for the Lucia Pole Mount is 5 lbs (2.25 kg).
NOTE: Ensure the finished installation is in accordance with local and national building codes, fire and safety codes,
and local and national electrical codes.
NOTE: Lab.gruppen will not be held responsible for any damages caused by the improper installation of the Lucia amplifier.
A
B
B
A
INSTALLATION OF POLE MOUNT SOLUTION 2
  • Page 1 1

LabGruppen LUCIA 120/1-70 Quick start guide

Type
Quick start guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI