Luxman L80 User manual

Type
User manual

This manual is also suitable for

Luxman L80 is a solid state integrated amplifier. It has an 8-pin Dual In-Line Package Type operational amplifier, featuring high frequency phase compensation. It is equipped with a fully complementary circuit configuration. The power amp section is rated at 50W/ch and has a voltage gain of approximately 39dB. The tone control section features a turnover frequency selector of two steps for both bass and treble. It has a delay time muting circuit that operates as a protection circuit, muting the amplifier for 5-10 seconds at power-on.

Luxman L80 is a solid state integrated amplifier. It has an 8-pin Dual In-Line Package Type operational amplifier, featuring high frequency phase compensation. It is equipped with a fully complementary circuit configuration. The power amp section is rated at 50W/ch and has a voltage gain of approximately 39dB. The tone control section features a turnover frequency selector of two steps for both bass and treble. It has a delay time muting circuit that operates as a protection circuit, muting the amplifier for 5-10 seconds at power-on.

  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

Luxman L80 User manual

Type
User manual
This manual is also suitable for

Luxman L80 is a solid state integrated amplifier. It has an 8-pin Dual In-Line Package Type operational amplifier, featuring high frequency phase compensation. It is equipped with a fully complementary circuit configuration. The power amp section is rated at 50W/ch and has a voltage gain of approximately 39dB. The tone control section features a turnover frequency selector of two steps for both bass and treble. It has a delay time muting circuit that operates as a protection circuit, muting the amplifier for 5-10 seconds at power-on.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI