Fender Pour Over Envelope Filter Owner's manual

Category
Guitar accessories
Type
Owner's manual
POUR OVER ENV FILTER
5
15
16
1
3
13
10
9
7
1. Bypass Footswitch
2. Jewel Indicator
3. Output Jack
4. Level
5. Tone
6. Distortion Switch
7. Gain
8. Frequency
9. Q
10. Drive
11. Up/Down Switch
12. Filter Type Switch
13. Input Jack
14. Low Battery Indicator
15. LED Kill Switch
16. DC Power Connector
4
LEDs
9V DC
INPUT
POUR OVER ENV FILTER
DRIVE
DOWNFILTER
UP
DIST
BP
LP
HP
TONE
LEVEL
FREQ Q
6 8
GAIN
14
2
12
11
Thanks for purchasing the Pour Over Env Filter –
a unique new take on the classic envelope filter
effect. Pour Overs filter section features
Frequency, Q and Drive controls, and toggle
switches for sweep-up/sweep-down and filter
type (low, high or band-pass). The distortion has
its own dedicated toggle switch, with familiar
Gain, Tone and Level controls.
POUR OVER ENV FILTER
DESIGNED IN CALIFORNIA, U.S.A.
Bypass Footswitch
Bypasses eect.
Jewel Indicator
Illuminates when eect is active.
Level
Controls overall distortion output level.
Distortion Switch
Turns distortion on and o.
Tone
Similar to tone control on a guitar – turn counterclockwise to
decrease treble frequencies; turn clockwise for full-range tone.
Gain
Controls amount of distortion added to signal.
Freq
Controls lter frequency range.
Q
Controls lter resonant peak.
Drive
Controls amount of signal fed into lter.
Up/Down Switch
Controls frequency sweep direction.
Filter Type Switch
Selects low, high or band-pass lter type.
Input Jack
High-impedance input suitable for electric guitar, bass, acoustic
guitars with pickup systems, keyboards and other instruments.
Output Jack
Low-impedance output jack connects to amp or to next eect
pedal in signal chain.
DC Power Connector
Standard center-negative 9VDC jack for use with appropriate
power supplies.
LED Kill Switch
Deactivates control-knob illumination.
A PRODUCT OF:
FENDER MUSICAL INSTRUMENTS CORPORATION
CORONA, CALIFORNIA, USA
Fender® is a registered trademark of FMIC.
Copyright © 2019 FMIC. All rights reserved.
P/N 7717099000 - REV 1
Important Safety Instructions
•WARNING: To prevent damage, fire or shock hazard, do not expose the unit or its AC
power to rain or moisture.
•Do not alter the AC plug of the connected power adapter
•Do not drip or splash liquids on the unit.
•No user serviceable parts inside, refer servicing to qualified personnel only.
• WARNING: The unit must only be connected to a safety agency certified, regulated,
power source (adapter), approved for use and compliant with applicable local and
national regulatory safety requirements.
• Unplug the AC power adapter before cleaning the unit exterior. Use only a damp cloth
for cleaning and then wait until the unit is completely dry before reconnecting it to power.
• Amplifiers and loudspeaker systems, and ear/headphones (if equipped) are capable
of producing very high sound pressure levels which may cause temporary or permanent
hearing damage. Use care when setting and adjusting volume levels during use.
Additional Languages
Manual available in additional languages at:
www.fender.com/support
Product specifications subject to change without notice
Specifications
IMPEDANCES:
POWER SUPPLY:
POWER REQUIREMENTS:
DIMENSIONS:
WEIGHT:
INPUT: 820kΩ OUTPUT: 470Ω
9VDC regulated adapter,
5.5 x 2.1 mm barrel connector, center negative
75mA @ 9VDC
3.75” x 4.9” x 2.5” (95.25mm x 124.5mm x 63.5mm)
1.2lbs (.54kg)
NOTES:
© FENDER MUSICAL INSTRUMENTS 2019
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Fender Pour Over Envelope Filter Owner's manual

Category
Guitar accessories
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI