Randall T2HL User manual

USER MANUAL

VALVE DYNAMIC SERIES

T2C/T2HL

(1) The included footswitch changes Channel and Boost

(2) The Effects loop is to hook up external effects units- the Send function has

a level switch to adjust for pedal or studio style effects units’ input level.

(3) The Speaker outputs go to your speaker cabinet (or already hooked up to the

Celestion Hot 100 in the T2C) 100w @ 8ohms/150w @ 4ohms

(4) The Direct Recording Out is a convenient speaker emulated balance output

for studio or stage.

(5) Power switch is fairly obvious, but nonetheless important.

Congratulations on your new Randall Valve Dynamic amp!!!