Shark Steam cleaner Owner's manual

Category
Headphones
Type
Owner's manual
Bluetooth Headset
Owners Guide
www.iSharkk.com
2
I
Thank you for your purchase of the SHARKK
Bluetooth Headset. Please take the time to read
this manual carefully before you begin using your
new item.
Featuring an advanced A2DP profile and equipped
with the very latest in Bluetooth (v4.0) technology,
the SHARKK Bluetooth Headset is the perfect,
must-have cell phone companion. The sturdy
3
I
charging dock with vehicle air-vent mount (includ-
ed) makes it easy to charge your device at home, at
the oce and even while driving in your car.
In addition to the Bluetooth Headset, the
SHARKK Lifestyle Brand is pleased to be able to
oer a wide range of consumer accessories across
many dierent product categories. Keyboards,
Tablet and Phone Cases, Speakers and Wallets are
Introduction
4
but a few of the items that make up our extensive
online catalog. Here at SHARKK, the quality of our
products and the satisfaction of our customers are
the two greatest passions of our enterprise, as we
endeavor to bring you top quality items at compet-
itive prices.
5
G S
Box Content
1x Bluetooth Headset
1x Charging Dock
2x Ear Hooks
3x Spare Ear Tips
1x USB Charging Cable
1x Vehicle Air-Vent Mount
1x Adhesive Wall Mount
6
G S
Charging
Charge the headset by plugging the USB cable
into the charging port of the headset or by placing
the device on the charging dock
To turn the headset on
Press the On/O button once, a blue light will
ash for 1 second, indicating that the headset is
turned on.
7
G S
To turn the headset o
Press and hold the On/
O button until a red light
appears, this will indicate that
your device is powering down.
Notice: A blue light flashing red
while the device is in standby mode indicates that the battery
is running low.
On/off
button
Vol +
Vol -
8
G S
Device Pairing
1. Begin by ensuring that your device is OFF and
that Bluetooth mode is active on the cell phone
you wish to pair it with.
2. Press and hold the On/O button until the
indicator light alternately flashes blue and red
(approx. 10 seconds), this will indicate that your
device has entered pairing mode.
9
G S
3. Search for the headset from your phone.
4. Your headset will appear on your phone as
SHARKK BT”. Select this device and confirm
the connection.
5. On some phones you may be asked to enter a
PIN or password when pairing. The PIN for this
device is “0000”.
10
G S
Sleep Mode
Placing your headset in the charging dock will
automatically activate sleep mode, indicated by
a red flashing light.
Removing the headset from the charging dock
will automatically reactivate the headset, indicat-
ed by a blue flashing light.
11
G S
Making a Call
Once the headset is paired and active, simply
make a call from your phone as you normally
would.
12
G S
Voice Dialing
If your cell phone supports this feature, and this
feature is active on your phone, you can activate
voice dialing by pressing the On/O button
once.
Press the On/O button again to deactivate.
13
G S
Answering a Call
Press the On/O button once to answer a call.
If the headset is charging in the charging dock,
simply removing it from the dock will answer
the call (after 5 second delay).
Ending a Call
Press the On/O button once to end a call.
14
G S
Mulitpoint Connection
(connecting your device with multiple phones.)
First complete Device Pairing steps 1-5 with cell-
phone A.
Once connection has been established, power
OFF the headset.
Complete Device Pairing steps 1-5 with cell-
phone B.
15
G S
Re-activate the Bluetooth connection on cell-
phone A.
16
G S
Answering Simultaneous Calls
Press and hold On/O button for 2 seconds to
accept the call from the first paired phone and
reject the call from the second paired phone.
Press On/O button once to answer the call
from the second paired phone and place the call
on the first paired phone on hold.
17
G S
Press On/O button twice to transfer between
calls.
Press On/O button once to end the first call
and transfer to a second call that has been on
hold.
18
G S
Redialing
Press On/O button twice to redial the last called
number.
Reject an incoming call
Press and hold On/O button for 2 seconds to
reject incoming call.
19
G S
Transferring Calls Between
Phone and Headset
Press and hold the On/O button until you hear
a tone sound, indicating that the call has been
transferred to your phone.
20
G S
Muting your Device
Press Vol+ and Vol- simultaneously to mute your
device.
Delete Pairing Records
Press Vol+ and Vol- simultaneously for a duration
of 4 seconds to delete pairing records from your
device.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

Shark Steam cleaner Owner's manual

Category
Headphones
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI