Workzone CDLID20 Owner's manual

Brand: Workzone

Model: CDLID20

Category: Power tools

Type: Owner's manual

Workzone CDLID20 is a versatile tool designed to make polishing and buffing tasks easier. This 20V Li-Ion Cordless Auto Buffer/Polisher is suitable for use on cars, boats, RVs, floors, and other coated surfaces. It comes equipped with a polishing/buffing bonnet and a terry towel bonnet for different applications.

Xfinity Li-ION 20V

Instruction Manual

IMPORTANT

Read carefully before use

Keep for future reference

20V Li-Ion Cordless Auto

Buffer / Polisher

ODEL

NUMBER

CDLID20

Version number:

003

1300 889 028

[email protected]m

03/2019

63520CDLID20

AFTER SALES SUPPORT e-mail: [email protected]m

1300 889 028 (toll free) MODEL No.: CDLID20 • 63520 • 03/2019

Welcome

Congratulations in choosing to buy a Workzone® Titanium 20V Li-Ion

Cordless Auto Buffer / Polisher.

All products bought to you by Workzone® Titanium are manufactured

to the highest standards of performance and safety and, as part of

our philosophy of customer service and satisfaction, are backed by our

comprehensive 5 Year Warranty. We hope you will enjoy your purchase

for many years to come.

When you open your packaging, ﬁrst remove all items and check there

are no parts damaged or missing. If you ﬁnd anything wrong, do not

operate the product until the parts have been replaced or the fault has

been rectiﬁed. Failure to do so could result in serious personal injury.

AFTER SALES SUPPORT e-mail: [email protected]m

1300 889 028 (toll free) MODEL No.: CDLID20 • 63520 • 03/2019

Contents

Application

Package Contents

Parts description

Description of symbols

General safety warnings

Safety notes for battery/charger

Important information-Product care

Assembly

Operation

Maintenance, Storage and Cleaning

Warranty

Disposal and environmental protection

Accessories and After Sales parts

FAQ/Troubleshooting

Technical Speciﬁcations

AFTER SALES SUPPORT e-mail: [email protected]m

1300 889 028 (toll free) MODEL No.: CDLID20 • 63520 • 03/2019

1.Application

First time users or inexperienced operators pay particular attention

to the operation of the 20V Li-Ion Cordless Auto Buffer / Polisher,

including details of starting and stopping and correct use of the 20V

Li-Ion Cordless Auto Buffer / Polisher on pages 14-20, as well as the

maintenance instructions on pages 21.

Intended use of 20V Li-Ion Cordless Auto Buffer / Polisher

NOTE: This product is for private domestic DIY use only. It is not

suitable for commercial or trade use.

This 20V Li-Ion Cordless Auto Buffer / Polisher is used for polishing

and bufﬁng cars, boats, recreational vehicles , ﬂoors and other coated

surfaces.

2.Package Contents

1 x Auto Buffer / Polisher

1 x 20V Li-Ion Battery

1 x 20V Charger Adapter

1 x Plug Pack Charger

1 x Polishing / Bufﬁng Bonnet

1 x Terry Towel Bonnet

1 x Instruction Manual

1 x Warranty Card

• Remove all packing materials

• Ensure all parts on the contents list are present

• Check the appliance, and all accessories for transportation damages

WARNING! Please read and understand this instruction manual

before use and keep it for your future reference. Your power tool

should only be passed on together with this instruction manual.

AFTER SALES SUPPORT e-mail: [email protected]m

1300 889 028 (toll free) MODEL No.: CDLID20 • 63520 • 03/2019

WARNING! To reduce risk of injury, only use the supplied battery

and charger OR any 20V Xﬁnity Plus battery pack or chargers.

Other type of battery packs may burst causing personal injury and

damage. The battery pack must be recharged only with the supplied

charger OR any 20V Xﬁnity Plus battery charger.

NOTE: This appliance (charger) must be used with a residual current

device with a rated residual current of 30mA or less.

AFTER SALES SUPPORT e-mail: [email protected]m

1300 889 028 (toll free) MODEL No.: CDLID20 • 63520 • 03/2019

3.Parts description

Plastic handle/s

On/Off switch

Battery pack release button

Battery pack

Foam pad base

Polishing / Bufﬁng bonnet

Terry towel bonnet

Charger adaptor (SEE FIG. A)

Plug pack charger (SEE FIG. A)

AFTER SALES SUPPORT e-mail: [email protected]m

1300 889 028 (toll free) MODEL No.: CDLID20 • 63520 • 03/2019

4.Description of Symbolssymbols

To reduce the risk of injury, user must read instruction manual

Warning

Wear ear protection

Wear eye protection

Wear dust mask

Regulatory Compliance Mark. Appliance complies with

requirements of electrical approval & EMC in Australia.

For indoor use only (only for charger)

Do not charge the battery pack if the ambient temperature is

less then 0°C or greater than 45°C.

Li-Ion battery. This product has been marked with a symbol

relating to ‘separate collection’ for all battery packs and battery

pack. It will then be recycled or dismantled in order to reduce

the impact on the environment. Battery packs can be hazardous

for the environment and for human health since they contain

hazardous substances.

The instruction manual, rating plate, or on the product itself, may show

these symbols. These represent important information about the product or

instructions on its use.

max45 C

AFTER SALES SUPPORT e-mail: [email protected]m

1300 889 028 (toll free) MODEL No.: CDLID20 • 63520 • 03/2019

Do not crush, disassemble, short terminals or dispose in ﬁre;

there is a risk of burns explosion or ﬁre.

Do not put in water.

Positive terminal

Negative terminal

Double insulation (only for charger) There are two independent

barriers of insulation to protect you from the possibility of

electrical shock.

Polarity

Fuse

60 Months Warranty

MEPS

T2A

AFTER SALES SUPPORT e-mail: [email protected]m

1300 889 028 (toll free) MODEL No.: CDLID20 • 63520 • 03/2019

5. General safety warnings

General Power Tool Safety Warnings

WARNING Read all safety warnings , instructions,

illustrations and speciﬁcations provided with this power

tool.

Failure to follow the warnings and instructions may result in electric

shock, ﬁre and/or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-operated

(corded) power tool or battery-operated (cordless) power tool.

1). Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas invite

accidents.

b) Do not operate power tools in explosive atmospheres, such

as in the presence of ﬂammable liquids, gases or dust. Power

tools create sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while operating a power

tool. Distractions can cause you to lose control.

2). Electrical safety

a) Power tool plugs must match the outlet. Never modify the

plug in any way. Do not use any adapter plugs with earthed

(grounded) power tools. Unmodiﬁed plugs and matching outlets

will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces,

such as pipes, radiators, ranges and refrigerators. There is an

increased risk of electric shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet conditions. Water

entering a power tool will increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for carrying,

pulling or unplugging the power tool. Keep cord away from

AFTER SALES SUPPORT e-mail: [email protected]m

1300 889 028 (toll free) MODEL No.: CDLID20 • 63520 • 03/2019

heat, oil, sharp edges or moving parts. Damaged or entangled

cords increase the risk of electric shock.

e) When operating a power tool outdoors, use an extension

cord suitable for outdoor use. Use of a cord suitable for outdoor

use reduces the risk of electric shock.

f) If operating a power tool in a damp location is unavoidable,

use a residual current device (RCD) protected supply. Use of an

RCD reduces the risk of electric shock.

3). Personal safety

a) Stay alert, watch what you are doing and use common sense

when operating a power tool. Do not use a power tool while

you are tired or under the inﬂuence of drugs, alcohol or

medication. A moment of inattention while operating power tools

may result in serious personal injury.

b) Use personal protective equipment. Always wear eye

protection. Protective equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing protection used for appropriate

conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the switch is in the

off-position before connecting to power source and/or

battery pack, picking up or carrying the tool. Carrying power

tools with your ﬁnger on the switch or energising power tools that

have the switch on invites accidents.

d) Remove any adjusting key or wrench before turning the

power tool on. A wrench or a key left attached to a rotating part

of the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and balance at all

times. This enables better control of the power tool in unexpected

situations.

f) Dress properly. Do not wear loose clothing or jewellery. Keep

your hair and clothing away from moving parts. Loose clothes,

jewellery or long hair can be caught in moving parts.

AFTER SALES SUPPORT e-mail: [email protected]m

1300 889 028 (toll free) MODEL No.: CDLID20 • 63520 • 03/2019

g) If devices are provided for the connection of dust extraction

and collection facilities, ensure these are connected and

properly used. Use of dust collection can reduce dust-related

hazards.

h) Do not let familiarity gained from frequent use of tools

allow you to become complacent and ignore tool safety

principles. A careless action can cause severe injury within a

fraction of a second.

4). Power tool use and care

a) Do not force the power tool. Use the correct power tool for

your application. The correct power tool will do the job better and

safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not turn it on

and off. Any power tool that cannot be controlled with the switch

is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or remove

the battery pack, if detachable, from the power tool before

making any adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

d) Store idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool or

these instructions to operate the power tool. Power tools are

dangerous in the hands of untrained users.

e) Maintain power tools and accessories. Check for

misalignment or binding of moving parts, breakage of parts

and any other condition that may affect the power tool’s

operation. If damaged, have the power tool repaired before use.

Many accidents are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly maintained cutting

tools with sharp cutting edges are less likely to bind and are easier

to control.

AFTER SALES SUPPORT e-mail: [email protected]m

1300 889 028 (toll free) MODEL No.: CDLID20 • 63520 • 03/2019

g) Use the power tool, accessories and tool bits etc. in

accordance with these instructions, taking into account the

working conditions and the work to be performed. Use of the

power tool for operations different from those intended could result

in a hazardous situation.

h) Keep handles and grasping surfaces dry, clean and free from

oil and grease. Slippery handles and grasping surfaces do not allow

for safe handling and control of the tool in unexpected situations.

5). Battery tool use and care

a) Recharge only with the charger speciﬁed by the

manufacturer. A charger that is suitable for one type of battery

pack may create a risk of ﬁre when used with another battery pack.

b) Use power tools only with speciﬁcally designated battery

packs. Use of any other battery packs may create a risk of injury and

ﬁre.

c) When battery pack is not in use, keep it away from other

metal objects, like paper clips, coins, keys, nails, screws or

other small metal objects, that can make a connection from

one terminal to another. Shorting the battery terminals together

may cause burns or a ﬁre.

d) Under abusive conditions, liquid may be ejected from the

battery; avoid contact. If contact accidentally occurs, ﬂush

with water. If liquid contacts eyes, additionally seek medical

help. Liquid ejected from the battery may cause irritation or burns.

e) Do not use a battery pack or tool that is damaged

or modiﬁed. Damaged or modiﬁed batteries may exhibit

unpredictable behaviour resulting in ﬁre, explosion or risk of injury.

f) Do not expose a battery pack or tool to ﬁre or excessive

temperature. Exposure to ﬁre or temperature above 130 °C may

cause explosion.

g) Follow all charging instructions and do not charge the

battery pack or tool outside the temperature range speciﬁed

AFTER SALES SUPPORT e-mail: [email protected]m

1300 889 028 (toll free) MODEL No.: CDLID20 • 63520 • 03/2019

6. Safety notes for battery/charger

in the instructions. Charging improperly or at temperatures

outside the speciﬁed range may damage the battery and increase

the risk of ﬁre.

6). Service

a) Have your power tool serviced by a qualiﬁed repair person

using only identical replacement parts. This will ensure that the

safety of the power tool is maintained.

b) Never service damaged battery packs. Service of battery packs

should only be performed by the manufacturer or authorized service

providers.

Additional safety rules:

Always wear eye protection.

Always wear ear protection during extended periods of operation.

Always check walls and ceilings to avoid hidden power cables and

pipes. A metal detector can be obtained from any good DIY store for

this purpose.

Use the original accessories and the tool provided, no others.

Only use accessories in good condition. Do not use torn or worn

accessories.

Do not turn the machine on whilst any of the accessories are resting on

or inserted into the work piece or material that you want to work with.

Wait until the machine is up to full speed before proceeding with your

task.

Keep your hands away from cutting area. Do not reach under the

material being cut.

The operating instructions and the enclosed safety information should

be kept carefully for later use and enclosed with the machine, should it

be passed on or sold.

AFTER SALES SUPPORT e-mail: [email protected]m

1300 889 028 (toll free) MODEL No.: CDLID20 • 63520 • 03/2019

6. Safety notes for battery/charger

Safety Warnings for battery pack

a) Do not dismantle, open or shred cells or battery pack.

b) Do not short-circuit a battery pack. Do not store battery packs

haphazardly in a box or drawer where they may short-circuit

each other or be short-circuited by conductive materials.

When battery pack is not in use, keep it away from other metal

objects, like paper clips, coins, keys, nails, screws or other small metal

objects, that can make a connection from one terminal to another.

Shorting the battery terminals together may cause burns or a ﬁre.

c) Do not expose battery pack to heat or ﬁre. Avoid storage in

direct sunlight.

d) Do not subject battery pack to mechanical shock.

e) In the event of battery leaking, do not allow the liquid to

come into contact with the skin or eyes. If contact has been

made, wash the affected area with copious amounts of water

and seek medical advice.

f) Seek medical advice immediately if a cell or battery pack has

been swallowed.

g) Keep battery pack clean and dry.

h) Wipe the battery pack terminals with a clean dry cloth if they

become dirty.

i) Battery pack needs to be charged before use. Always refer to

this instruction and use the correct charging procedure.

j) Do not maintain battery pack on charge when not in use.

k) After extended periods of storage, it may be necessary to

charge and discharge the battery pack several times to obtain

maximum performance.

l) Battery pack gives its best performance when it is operated

at normal room temperature (20 °C ± 5 °C).

m)When disposing of battery packs, keep battery packs of

different electrochemical systems separate from each other.

AFTER SALES SUPPORT e-mail: [email protected]m

1300 889 028 (toll free) MODEL No.: CDLID20 • 63520 • 03/2019

n) Recharge only with the charger speciﬁed by ALDI. Do not use

any charger other than that speciﬁcally provided for use with

the equipment. A charger that is suitable for one type of battery

pack may create a risk of ﬁre when used with another battery pack.

o) Do not use any battery pack which is not designed for

use with the equipment.The supplied battery pack or any

ALDI 20V Xﬁnity Plus battery can be used on this tool. The

supplied charger or any ALDI 20V Xﬁnity Plus charger can be

used on this tool.

p) Keep battery pack out of the reach of children.

q) Retain the original product literature for future reference.

r) Remove the battery from the equipment when not in use.

s) Dispose of properly.

General Safety Warnings for charger

WARNING Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may result in

electric shock, ﬁre and/or serious injury.

Save all warnings and instructions for future reference.

- This appliance is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, or lack of

experience and knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a person

responsible for their safety.

- Children should be supervised to ensure that they do not play with

the appliance. If the supply cord is damaged, it must be replaced by

the manufacturer, its service agent or similarly qualiﬁed persons in

order to avoid a hazard.

Additional safety instructions for your Battery Charger

1. Before charging, read the instructions.

2. For charging Li-ion battery pack only.

3. Do not charge a leaking battery.

AFTER SALES SUPPORT e-mail: [email protected]m

1300 889 028 (toll free) MODEL No.: CDLID20 • 63520 • 03/2019

4. Do not use chargers for works other than those for which they are

designed.

Before charging, ensure your charger is matching the local AC supply.

6. The charging device must be protected from moisture.

7. Do not use the charging device in the open.

8. Do not short out the contacts of battery or charger.

9. Respect the polarity “+/-“ when charging.

10.Do not open the unit and keep out of the reach of children.

11.Do not charge the batteries of other manufactures or ill-suited

models.

12.Ensure that the connection between the battery charger and battery

is correctly positioned and is not obstructed by foreign bodies.

13.Keep battery charger’s slots free of foreign objects and protect

against dirt and humidity. Store in a dry and frost-free place.

14.When charging batteries, ensure that the battery charger is in a

well-ventilated area and away from inﬂammable materials. Batteries

can get hot during charging. Do not overcharge any batteries.

Ensure that batteries and chargers are not left unsupervised during

charging.

15.Do not recharge non-rechargeable batteries, as they can overheat

and break.

16.Longer life and better performance can be obtained if the battery

pack is charged when the air temperature is between 18°C and 24°C.

Do not charge the battery pack in air temperatures below 4.5°C, or

above 40.5°C. This is important as it can prevent serious damage to

the battery pack.

17.The supplied charger or any ALDI 20V Xﬁnity Plus charger can be

used on this battery supplied with this tool. Do not use any other

chargers.

7. Important information – Product care

This product uses Lithium Ion Battery Cells. Care MUST be taken to

ensure both the safety and life of the pack is maintained. Ensure you

AFTER SALES SUPPORT e-mail: [email protected]m

1300 889 028 (toll free) MODEL No.: CDLID20 • 63520 • 03/2019

have read all of the safety notes in the previous pages before using the

Auto Buffer / Polisher.

Treat the battery pack with care and within the guidelines of this

manual.

If the battery pack does become immersed in water or any ﬂuids, or is

subject to a severe drop or it does not operate within the guidelines

of this manual or the supplied manual of any ALDI 20V Xﬁnity Plus

batteries, immediately STOP using the battery pack and have it

checked.

8. Assembly

NOTE: Before using the tool, read the instruction book carefully.

Before putting into operation and charging your battery pack, note

not to use any charger other than that speciﬁcally provided for use

with the tool. This product is also compatible with any ALDI Xﬁnity Plus

20V Batteries or Chargers.

If the battery pack is very hot you must remove your battery pack

from the charger and allow time for the battery to cool down before

recharging.

Charge the battery to reach full before storage. If the tool will not be

used for long periods of time, charge the battery every 3 months.

8.1 Charging procedure (See Fig. A)

1) Plug the plug pack charger (9) into the mains power socket and turn

on. The light will be green to indicate there is

power to the plug pack charger (9).

2) Plug the lead from the plug pack charger (9)

into the back of the charger adaptor (8).

2) Slide the Battery pack (4) into the charger

adaptor (8) by aligning the guiding rails on the

battery pack (4) and the charger adaptor (8). A

click indicates the battery is ﬁtted. Make sure

the battery is secured ﬁrmly. The light will turn

Operation

AFTER SALES SUPPORT e-mail: [email protected]m

1300 889 028 (toll free) MODEL No.: CDLID20 • 63520 • 03/2019

to red to indicate the charging process has started.

3) When charging is completed, the light will turn to green.

4) Once fully charged, unplug the charger adaptor (8) and plug pack

charger (9) and remove the battery pack (4).

NOTE: The power to the charger adaptor (8) / plug pack charger

(9) should be turned off when unattended.

8.2 Charging indicator

Light Status

Green ON

Plug pack charger (9) is plugged

into the mains power and turned

on, without the battery inserted.

Red ON Charging

Red OFF

Green ON Fully charged

8.3 To remove and install the battery pack (See Fig. B1)

1. Press the battery pack (4) release button (3) ﬁrmly, and then slide the

battery pack (4) upwards to remove the battery pack (4) (See Fig. B1).

After recharging, insert the battery pack (4) into the product battery

port. A simple push and slight pressure will be sufﬁcient (See Fig. B2). A

click will indicate the battery pack (4) is secure.

B1 B2

AFTER SALES SUPPORT e-mail: [email protected]m

1300 889 028 (toll free) MODEL No.: CDLID20 • 63520 • 03/2019

9.Operation

9.1 Attaching the terry towel bonnet (7) to the foam pad base

(5) (See Fig. C1, C2)

1) Place the terry towel bonnet (7) over the foam pad base (5) as shown

in Fig. C1.

2) Always make sure that the elastic strip on the bottom of the bonnet

is securely tucked on the underside of the foam pad base (5).

9.2 Applying wax to terry towel bonnet (7)

IMPORTANT: DO NOT APPLY WAX DIRECTLY

ON CAR!

Applying paste wax to terry towel bonnet

(7) (See Fig. D)

1) Spread a heaped teaspoon of wax evenly over

the entire surface of the terry towel bonnet (7)

using a putty knife or any other ﬂat object.

9.3 Applying liquid wax to terry towel bonnet (7) (See Fig. E)

1) Apply three swirls of wax over the terry towel bonnet (7) (See Fig. E).

2) This should be enough to cover 1/4 of a cars surface.

3) For the second and third and fourth applications, only use

approximately half as much as used on the ﬁrst application. The

C1 C2

AFTER SALES SUPPORT e-mail: [email protected]m

1300 889 028 (toll free) MODEL No.: CDLID20 • 63520 • 03/2019

terry towel bonnet (7) will not absorb as much

wax on later applications.

9.4 Running your polisher and waxing a vehicle

1) To avoid splashing wax, always start and stop

the polisher against the surface to be polished.

2) Place the polisher against the vehicle and turn

the polisher ON by pressing the “I” on the On/

Off switch (2).

3) Apply wax in a straight line with either a side-

to-side or back and forth motion.

Always use broad, even strokes when applying

wax (See Fig. F).

4) Start applying wax to the ﬂat surfaces (hood,

trunk and roof) ﬁrst. Wax one section at a time

(See Fig. G).

5). After ﬂat surfaces are covered with wax, you

can do the sides.

6). Apply wax in a thin, even coat. Too much wax does not add any

more protection and only makes the wax removal more difﬁcult.

7). The random orbit motion of the buffer / polisher provides an

application that cannot be duplicated, not even “by hand”.

IMPORTANT: Do not apply excessive pressure against the work surface

with the buffer / polisher. The random orbital motion feature on this

GHI

Page is loading ...

Workzone CDLID20 Owner's manual

Brand: Workzone

Model: CDLID20

Category: Power tools

Type: Owner's manual

Download PDF

report

Workzone CDLID20 Owner's manual

Workzone CDLID20 Owner's manual

Related papers

Other documents