Table of Contents
Important Safety Instructions ------------------------------------------ 1
Introduction --------------------------------------------------------------- 2
Understand the Unit ----------------------------------------------------- 2
How to use it -------------------------------------------------------------- 3
Specifications ------------------------------------------------------------ 4
FAQ Frequently Asked Questions ------------------------------------ 4
Warranty ------------------------------------------------------------------ 5
Contact US --------------------------------------------------------------- 6
Important Safety Instructions
Please read instructions carefully before operation
1.To prevent risk of electric shock, do not remove the cover from the unit.
Refer all servicing to qualified service personnel only.
2.Do not use the device near water.
3.Clean with a dry cloth only
4.Place this unit in an open space and ensure the unit is well ventilated.
5.To prevent risk of electric shock or fire hazard due to overheating, do not
obstruct the unit with newspapers, tablecloths, curtains or similar items.
6.Do not install near any heat sources such as radiators, heat registers,
stoves, etc.
7.Unplug during lightning storms or when unused for a long time.
8.Protect the power cord from being walked on or pinched, particularly
near plugs.
9.Only use manufacturer specified attachments/accessories
HDMI Splitter 1X2 4K Page 1
Introduction
The Rasfox 1x2 HDMI splitter allows you to split one HDMI source signal
to two displays, it supports all the mandatory and several optional 4k
formats described in HDMI 1.4 specifications, maintains sharp HDTV
resolution up to 4kx2k full HD and 3D.HDMI splitter used to duplicate
signal from your cable box so you can watch same shows in two televisions
or televisions and home theater system, or televisions and projectors .
Understand the Unit
HDMI Splitter 1X2 4K Page 2
HDMI Splitter 1X2 4K Page 3
How to use it
1.Take an HDMI cable and plug one end into the HDMI output port on your
source device. Plug the other end into the input HDMI port on the splitter.
2.Take an HDMI cable and plug one end into one HDMI output port on the
splitter. Plug the other end into the input port on your TV or display.
3.Take an HDMI cable and plug one end into another HDMI output port on
the splitter. Plug the other end into the input port on your second TV or
display.
4.Plug the output end of power adapter into the DC Power jack. Plug the
power adapter into an AC power outlet. Your converter is connected
and ready for use now.
FAQ Frequently Asked Questions
1. What devices is the Rasfox splitter box compatible with?
This splitter work well with any source devices with HDMI output port. It support
up to HDMI ver 1.4 ( 4K @ 30Hz).
2. Will this device send a signal to two TVs at the same time?
Yes. It duplicate signal from your media device so you can watch same shows
in two televisions at same time.
3. Why isn’t my splitter working?
Our splitters have been extensively tested and work well. It is solid
constructed with a metal case and well packed for shipping, ensuring the
product you receive should be of high quality. If you have any problems,
there are some common issues that you should double-check
HDMI Splitter 1X2 4K Page 4
Specifications
HDMI Version HDMI 1.4 (compatible HDMI 1.3/1.2/1.1/1.0)
HDCP Compatible HDCP 1.3
Video Colour Format Xv-YCC/deep color up to 48bit
Audio Format DTS-HD Master Audio,Dolby true-HD etc.
MAX Baud Rate 10.2Gps
Operating Frequency Up to 340MHz
Power supply AC(50/60Hz)100V~240V input, DC5V 1A output
Operating temperature 10~70℃
Operating Humidity 5~90%RH
Dimension 66x63x21mm
480i/576i/480p/576p/720p/1080i/1080p/
3D/3840x2160
DTV/HDTV:
15 meters by 28AWGHDMI cable;20 meters
by 26 AWGHDMI cable
Max.Cable Extension
Warranty
1 Year Limited Hardware Warranty.
Lakesen hereby warrants to the customer of record that this product is in good-
working condition and free from defects in material or workmanship under normal
use for a duration of 1 year after the date of purchase. The product has been tested
to meet the highest quality standards in each testing category. In the unlikely event
that the product proves to be defective, Lakesen will repair or replace the product
free of charge. If replacement is required and if Lakesen then no longer carries the
same product, then Lakesen reserves the right to substitute the product with a
replacement product of like quality and size, suitable for the intended use.
HDMI Splitter 1X2 4K Page 5
1) The splitter MUST have power to function. Please be sure plug the
power adapter in and make sure the power adapter is working well. (You
can test the power adapter by unplugging the HDMI cable from the splitter
and plugging only the power adapter in. If the LED indicator is red, the
power adapter is working well, otherwise the power adapter is not working
and you need to contact with us to get a replacement).
2) Your TV MUST be on the proper input. Generally, you must use your
TV remote to change inputs until you get to the right one. Typically, the
remote has a button labeled source or input, but this varies by TV and
we do not maintain instructions for individual TVs.
3) Check to make sure your HDMI cable is securely connected to the
splitter and TV.
If you continue to have problems, please contact us by email :
contact@lakesen.com. We are always happy to help.
More questions? Please check www.rasfox.com/blog
This warranty is limited to repair or replacement of the mentioned product only,
is non-transferable and does not extend to any product damaged by misuse,
natural disasters or any other circumstances beyond Lakesen ‘s control. The
warranty does not cover or provide for the reimbursement or payment of
incidental or consequential damage resulting from breach of the limited warranty
described above. Except for the limited warranty described above we offer no
other warranties expressed or implied, and other than limited warranty expressly
contained herein, we hereby disclaim any and all warranties, including without
limitation any implied warranties of merchantability, suitability or fitness for a
particular purpose.
If your product is not functioning or you have any concerns please contact
Lakesen Support before returning the product.
Contact US
You can reach our support by writing to support@lakesen.com. You may
also visit www.rasfox.com or www.rasfox.com/blog for more information.
Made In China
HDMI Splitter 1X2 4K Page 6
-
1
-
2
-
3
-
4
-
5
-
6
-
7
