Page is loading ...
CORDLESS NECK & SHOULDER
SHIATSU MASSAGER WITH HEAT
SL-632NC
Use & care manual
• The massage device conforms to recognized technical principles and the latest
• Please avoid contact of the device with water, high temperatures and direct
• If plugs or cords are damaged, they must be replaced by the manufacturer, a
• Each massage – even a hand massage – must be refrained from during
pregnancy or if one or more of the following complaints are present in the
heat therapy together with 8 massage nodes which rotate in unison to provide
FEATURES
Heated
Arm straps
Power
input
Removable
sleeve
CONTENTS
• Removable sleeve
TECHNICAL DATA
Measurements:
Weight:
Voltage:
Nominal Power:
Press to turn on the
at high level, Press again
When the massger is turned
the heat
When the massager is
When the massager is
turned on,Press to set
the shiatsu intensity at
high or low level
NOTE:
Indicator light
Heat is created in the motors when placed under great stress and excessive
TROUBLESHOOTING
Problem oluon
Massage heads rotang
at reduced speed
The load on the massage heads is excessiveReduce pressure
and try again
Device switches o
suddenly
Device may have been in use for nuteAuto-shutofuncon
acvatedonnue using by pressing the ‘On’ buon aer resng
the unit for nute
Over-heat protecon funcon acvatedDevice is switched ofor
your safetyPlease rest device for -nutes before restarng
Device fails to startheck if device has been used for more than nuteIf so, let
device rest for nutes before connuingDevice may reuire
longer me to cool in warmer environment
heck if adaptor is plugged into socket
heck if adaptor output is connected to device power inlet wire
Jerky moon of massage
headsibraons from
device
Excessive pressure may have been applied to the device
Reduce pressure and try again
Always unplug the unit before cleaning itNever touch the power plug with wet hands
Before cleaning, allow unit to cool
Wipe the unit with a so, dry clothDo not use cloths containing any kind of chemical
or alcohol and solvent liuids
Never submerge any part of the unit in liuid
If the unit is parcularly dirty, use the following instrucons:
Dampen a cloth in water or a %–% mild detergent soluon
Wipe the dirty areas with the wet cloth
lean the cloth in water and wring it out, then wipe away any remaining
detergent othe surface of the unit
4Wipe the areas with a so, dry cloth to dry
Wait for the unit to become fully dry before use
Place massager in a safe, dry, and cool placeAvoid contact with sharp edges or
pointed objects which might cut or puncture the surface
•leeve wraps around unit, covering massage heads, and fastens with loop strip
•Wash in cold water with mild detergentAllow to air dry
Warranty
If you have any issue about the product, please feel free to contact us by sending
Tel:
Email:
Have queson ?
interference by one or more of the following measures:
must accept any interference received, including interference that may cause undesired
/
