Trueshopping ST-BC415B User manual

Offering a wide selection of products at competitive prices

Trueshopping Petrol Grass

Strimmer/Brush Cutter

BC260A, BC1E34F, BC1E36F, ST-BC415B, BC490, BC520, BC550, BC580, BC620,

BC650, BC680

Instruction Manual

Trueshopping

Before putting the machine into operation,

read this instruction manual thoroughly.

CONTENTS

What’s In The Box ___________________________________ 6

What They Should Look Like __________________________ 8

Engine with Throttle Already Attached ............................... 16

Control Handle ...................................................................... 18

Attaching the Safety Guard .................................................. 19

Attaching the Carrying Strap .............................................. 20

Attaching the Strimmer Spool ............................................. 21

Attaching the Brush Cutter Blade ........................................ 23

Changing the Strimmer Spooler .......................................... 25

Fuelling __________________________________________ 34

Starting The Brush Cutter/Strimmer ___________________ 36

Models 26cc , 33cc, 43cc, 49 cc, 52cc.................................. 37

Models 55cc, 58cc, 62cc, 65cc, 68cc ................................... 39

Cold start ............................................................................... 41

Warm start ............................................................................ 41

Stopping ................................................................................ 42

www.TrueShopping.co.uk

Page: 2 of 69

Trueshopping

Recoil Starter Handle ........................................................... 43

Hand Grip Controls .............................................................. 45

Safety Precautions _________________________________ 46

Protecting You ..................................................................... 46

Protecting Others ................................................................ 49

Protecting The Machine ...................................................... 50

Safely Using The Machine ___________________________ 51

Maintenance ______________________________________ 53

Replacing the Spark Plug .................................................... 54

Adjusting the Strimmer Fibre .............................................. 55

Cleaning the Air Filter .......................................................... 55

Maintaining the Bevel Gear ................................................. 57

Transportation and Storage __________________________ 58

Trouble Shooting __________________________________ 59

Specifications _____________________________________ 62

EC Declaration of Conformity _________________________ 67

www.TrueShopping.co.uk

Page: 3 of 69

Trueshopping

DIAGRAMS

Figure 1 The Handle ......................................................................... 7

Figure 2 What's in the Box .............................................................. 7

Figure 3 The Strimmer .................................................................... 8

Figure 4 Handle and Engine Unit .................................................... 8

Figure 5 The Brush Cutter ............................................................... 8

Figure 6 All Put Together ................................................................ 9

Figure 7 Brush Cutter Blade .......................................................... 10

Figure 8 Brush Cutter/Strimmer Parts .......................................... 11

Figure 9 More Brush Cutter/Strimmer Parts ................................ 12

Figure 10 The smaller engine with throttle .................................. 16

Figure 11 The larger engine with throttle ..................................... 16

Figure 12 Attaching the Handle ..................................................... 17

Figure 13 Removing the Screw ..................................................... 18

Figure 14 Attach the Control Handle ............................................ 18

Figure 15 Attaching the Safety Guard .......................................... 19

Figure 16 How to Attach the Safety Guard .................................. 20

Figure 26 The Parts ........................................................................ 21

Figure 27 Attaching the Strimmer Spool ..................................... 22

Figure 28 The Brush Cutter ........................................................... 23

Figure 29 Brush Cutter Blade Fixing ............................................. 24

Figure 30 Step 1 Unlock Spindle ................................................... 25

Figure 31 Step 2 Unscrew Spindle Head ....................................... 26

Figure 32 Step 3 Open Cover ........................................................ 26

Figure 33 Step 4 Place on Floor .................................................... 27

Figure 34 Step 5 Cut New Thread ................................................. 27

Figure 35 Step 6 Loop Thread ...................................................... 28

Figure 36 Step 6 Secure Thread ................................................... 28

Figure 37 Step 7 Wrap Wire .......................................................... 29

Figure 38 Step 8 Wire Wrapped ................................................... 29

Figure 39 Step 9 Insert Ends ......................................................... 30

www.TrueShopping.co.uk

Page: 4 of 69

Trueshopping

Figure 40 Spool Loaded ................................................................ 30

Figure 41 Step 10 Align Notches .................................................... 31

Figure 42 Loaded Spool ................................................................. 31

Figure 43 step 11 Put Thread Through Holes ............................... 32

Figure 44 Step 12 Replace Lid ....................................................... 32

Figure 45 Step 13 Click Lid ............................................................. 33

Figure 46 Step 14 Pull Thread Tight .............................................. 33

Figure 47 Status Before Starting .................................................. 37

Figure 48 Put Choke into On Position .......................................... 37

Figure 49 Pull Recoil Starter ......................................................... 38

Figure 50 When Running Return Choke by Hand ........................ 38

Figure 51 Chokes Position At Start ............................................... 39

Figure 52 Put Choke to this Position ............................................ 39

Figure 53 Pull the Recoil Starter ................................................... 40

Figure 54 Pull the Trigger, Choke Returns Automatically ........... 40

Figure 55 The Primer ..................................................................... 43

Figure 56 Recoil Starter Motor ..................................................... 44

Figure 57 Hand Grip Controls........................................................ 45

Figure 58 Spark Plug Gap .............................................................. 54

Figure 59 Finding the Air Filter ..................................................... 55

Figure 60 The Bevel Gear .............................................................. 57

Figure 61 Greasing The Bevel Gear ............................................... 57

www.TrueShopping.co.uk

Page: 5 of 69

Trueshopping

What’s In The Box

You are now the proud owner of a powerful Petrol Grass

Strimmer Brush Cutter. With its 2-stroke engine it makes light

work of even the toughest of tasks. The strimmer is not only

extremely versatile, but very easy to operate and maintain. With

its twin line and 3 toothed cutting blade, the Trueshopping Petrol

Strimmer is ideal for professional clean-up jobs, including

clearing out tough weeds and bushes over a large surface area.

In addition, the Trueshopping Petrol Brush cutter has a very high

power to weight ratio and easily starts in all weathers. It also

boasts maximum efficiency, high torque and rapid acceleration.

The machine features an ergonomic harness, which spreads the

load, improving comfort and efficiency for the user, and a bike-

style handlebar that is angled relative to the shaft, to prevent an

uneven load being placed on the user's back. Please see our add-

ons for this strimmer as you may want to add some useful

attachments to your order.

www.TrueShopping.co.uk

Page: 6 of 69

Trueshopping

The Handle

Figure 1 The Handle

Cutting Blade

Handle

Handle with throttle

Strimmer Spool

Nuts

Main engine unit

Petrol Mixing Bottle

Carrying Strap

Safety Guard

Tool Kit

Figure 2 What's in the Box

www.TrueShopping.co.uk

Page: 7 of 69

Trueshopping

What They Should Look Like

Figure 4 Handle and Engine Unit

Figure 5 The Brush Cutter Figure 3 The Strimmer

www.TrueShopping.co.uk

Page: 8 of 69

Trueshopping

Figure 6 All Put Together

www.TrueShopping.co.uk

Page: 9 of 69

Trueshopping

Figure 7 Brush Cutter Blade

12. Blade

13. Fixing screws with spring rings

14. Nut

15. Blade locking nut

16. Blade protection

17. Bracket diameter flange

18. Spacer disc

www.TrueShopping.co.uk

Page: 10 of 69

Trueshopping

Figure 8 Brush Cutter/Strimmer Parts

www.TrueShopping.co.uk

Page: 11 of 69

Trueshopping

Figure 9 More Brush Cutter/Strimmer Parts

www.TrueShopping.co.uk

Page: 12 of 69

Trueshopping

1. Engine

2. Spark plug connector

3. Main engine

4. Muffler

5. Fuel tank

6. Recoil starter handle

7. Fuel tank cap

8. Primer

9. Air filter case

10. Choke lever

11. Suspension sleeve

a. Loop

12. Handle grip

13. Handle bar

14. Harness

a. Hip protection pad

b. Securing clip

15. Locking lever

16. Clamp

17. Locking knob

www.TrueShopping.co.uk

Page: 13 of 69

Trueshopping

18. Mounting set (x 4) (pre-assembled)

a. Bolt

b. Spring washer’

c. Washer

d. Nut

19. Safety guard

20. Knife

21. Gear head

22. Bracket

23. Lower shaft

24. Upper shaft

25. Control cable

26. Bracket

a. Mounting set (x 4) (pre-assembled)

b. Bolt

c. Spring washer’

d. Washer

e. Nut

27. Strimmer head

www.TrueShopping.co.uk

Page: 14 of 69

Trueshopping

28. Control handle

a. Ignition switch (on/off)

b. Throttle interlock

c. Throttle control

29. Spindle

30. Backing flange

31. Backing flange

32. Cutter blade

33. Locking flange

34. Cap

35. Nut

36. Trimming head

a. Bumper

b. Trimming line

37. Spanner

38. Spindle lock rod

39. Socket wrench

40.

41. Hex key 4mm

42. Multi tool

43. Fuel mixing container

www.TrueShopping.co.uk

Page: 15 of 69

Trueshopping

Engine with Throttle Already Attached

Figure 10 The smaller engine with throttle

Figure 11 The larger engine with throttle

www.TrueShopping.co.uk

Page: 16 of 69

Trueshopping

Assembling the Handle

Figure 12 Attaching the Handle

These are the parts you need:

1. The long handle.

2. The two short handles.

Now attach as follows:

1. Loosen the 4 bolts on the handle bracket. (1) (2)

2. Insert the right handle with the throttle lever attached

and the left handle into the bracket. (3)

3. Tighten the bolts. (3)

4. Insert the left handle into the bracket. (4)

5. Tighten the bolts. (3)

6. Adjust both handles to a convenient work position before

starting the machine. (5)

7. The handle holder can be adjusted to your body height in

addition to the handle inclination by loosening the screws

on the rear side of the handle holder using the Allen key

and moving the handle holder to a position that is

convenient for you. Then tighten the screws.

www.TrueShopping.co.uk

Page: 17 of 69

Trueshopping

8. Attach the throttle cable to the main engine unit as

shown below.

9. Fix the throttle cable on the drive unit and on the handle

using the cable ties.

Control Handle

1. Loosen the pre-assembled screw with the screwdriver

and remove it, together with the now detached nut, from

the control handle.

2. Attach the control handle to the handle bar and secure it

with the screw and hex nut.

Figure 13 Removing the Screw

Figure 14 Attach the Control Handle

www.TrueShopping.co.uk

Page: 18 of 69

Trueshopping

Attaching the Safety Guard

1. Loosen the bolts with the hex key 4 mm and remove

them together with the washers, spring washer and nuts.

2. Move the retainer downward. If required, slightly loosen

the hex bolt.

3. Place the safety guard between retainer and support and

move the retainer upward.

4. Secure the safety guard with the mounting sets.

Figure 15 Attaching the Safety Guard

www.TrueShopping.co.uk

Page: 19 of 69

Trueshopping

Figure 16 How to Attach the Safety Guard

Attaching the Carrying Strap

1. Hook the carrying strap into the suspension eye.

2. Adjust the length of the carrying strap for convenient

working with the machine. If required, the suspension eye

can be moved by loosening the fixing screw.

www.TrueShopping.co.uk

Page: 20 of 69

Page is loading ...

Trueshopping ST-BC415B User manual

This manual is also suitable for

Trueshopping ST-BC415B User manual

Related papers

Other documents