DreamGEAR DGWII-1053 User guide

DGWII-1053
DreamGEAR
Brand
DreamGEAR
Model
DGWII-1053
Category
Notebook docks & port replicators
Type
User guide

DreamGEAR DGWII-1053 Quad Dock lets you charge four Wii remotes or rechargeable battery packs simultaneously. It features a built-in LED light to indicate charging status, saving you time and money by keeping your controllers always ready for gaming. The Quad Dock connects to your Wii console and comes with four rechargeable battery packs and a power pass-through cable.

DreamGEAR DGWII-1053 Quad Dock lets you charge four Wii remotes or rechargeable battery packs simultaneously. It features a built-in LED light to indicate charging status, saving you time and money by keeping your controllers always ready for gaming. The Quad Dock connects to your Wii console and comes with four rechargeable battery packs and a power pass-through cable.

www.dreamgear.net
www.dreamgear.net
FOR TECHNICAL SUPPORT
PLEASE CONTACT: 1-877-999-DREAM
or support@dreamgear.net
Quad Dock
USER’S GUIDE
Contents:
1 - Quad Dock
4 - Rechargeable Battery Packs
1 - Power Pass-through cable
Getting Started
1) Make sure that the Wii console is turned off.
2) Plug the Wii DC plug into the Quad Dock power adapter input.
3) Insert the Quad Dock DC plug into the Wii DC plug input.
4) Plug the secondary Wii DC plug into the Wii DC input connector.
5) Turn on the Wii and start gaming!
USING THE Wii REMOTE WITH THE QUAD DOCK
1) Insert a dreamGEAR Rechargeable Battery Pack into a Wii Remote. Insert the Wii
Remote with Rechargeable Battery Pack into the Quad Dock and make contact with
the charging terminal. The LED will light up red indicating the charge cycle has
begun. When the charge cycle is complete, the LED will light up blue.
2) To release the Wii Remote, simply lift and remove the Wii Remote from the Quad
Dock.
CHARGING THE DREAMGEAR RECHARGEABLE
BATTERY USING THE QUAD DOCK
1) Insert a dreamGEAR Rechargeable Battery Pack into the Quad Dock and make
contact with the charging terminal. The LED will light up red indicating the charge
cycle has begun. When the charge cycle is complete, the LED will light up blue.
2) To release the dreamGEAR Rechargeable Battery Pack, simply lift and remove it
from the Quad Dock.
Troubleshooting
Problem: My controller isn’t charging.
Solution: 1) Make sure the power source on the Quad Dock is plugged in properly
and securely. 2) Make sure the Wii Remote with the Rechargeable Battery Pack is
making proper contact with the charging terminals on the Quad Dock. Make sure the
Quad Dock is free of dirt and debris. Make sure that none of the contacts on BOTH
the controller and the Quad Dock are not damaged or compromised.
NOTE: Be sure and keep your Wii Remotes and Quad Dock clean. Dirt and debris
harm the battery contacts. Use a dry cloth to clean. DO NOT use water or any
chemicals to clean.
dreamGEAR’s Quad Dock
for the Wii, charges 4
separate Wii remotes or
Rechargeable Battery
Packs simultaneously. It
has a built-in LED light
which indicates when it
has finished charging.
dreamGEAR’s Quad Dock
saves you time and
money and keeps you
gaming!
  • Page 1 1

DreamGEAR DGWII-1053 User guide

DGWII-1053
DreamGEAR
Brand
DreamGEAR
Model
DGWII-1053
Category
Notebook docks & port replicators
Type
User guide

DreamGEAR DGWII-1053 Quad Dock lets you charge four Wii remotes or rechargeable battery packs simultaneously. It features a built-in LED light to indicate charging status, saving you time and money by keeping your controllers always ready for gaming. The Quad Dock connects to your Wii console and comes with four rechargeable battery packs and a power pass-through cable.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents