Kata R-103 User manual

R-103
Kata
Brand
Kata
Model
R-103
Category
Camera cases
Type
User manual

This manual is also suitable for

Kata R-103 is a versatile and modular backpack component designed to securely carry a tripod. It can be attached to various Kata backpacks, including the BP-502, R-102/3, and HB-205/7. The TST Tripod Holder includes a pouch and an upper fastening strap for added security. It features adjustable height and multiple attachment points for optimal weight distribution. Whether you're hiking, traveling, or simply carrying your tripod around, the Kata R-103 provides a convenient and reliable solution for photographers on the go.

Kata R-103 is a versatile and modular backpack component designed to securely carry a tripod. It can be attached to various Kata backpacks, including the BP-502, R-102/3, and HB-205/7. The TST Tripod Holder includes a pouch and an upper fastening strap for added security. It features adjustable height and multiple attachment points for optimal weight distribution. Whether you're hiking, traveling, or simply carrying your tripod around, the Kata R-103 provides a convenient and reliable solution for photographers on the go.

Secure the top of the tripod with the fastening
strap .
Slide the strap through one of the upper vertical
connecting loops and fasten firmly.
Adjust hanging height according to the length of
your tripod:
Open the top Slik-clip buckles on the back of the
pouch (these can be opened from either side)
and slide them through the loops on the side of
the backpack.
Note:
It is possible to adjust the height of the pouch by
utilizing the vertical connecting loops which are
on the backpack. This allows you to achieve
optimal weight distribution.
Side attachment configuration
Secure the Slik-clip buckle through one of the
loops on the opposite strap of the pouch.
Additional front attachment position for R-102/3 HB-205/7
Connect the 2 Slik-clip buckles to the top
parallel tabs on the R-102/3 HB-205/7 front
panel, and slide the fastening strap through.
This configuration offers symmetrical
weight distribution without compromising
the front quick opening for camera access.
Katas TST Tripod Holder is a modular and
versatile component. It can be connected to
most KATA backpacks:
BP-502
R-102/3
HB-205/7
The TST Tripod Holder includes the pouch
and an upper fastening strap.
TST TRIPOD HOLDER
Name:
Order code:
1
2
3
4
Attachment stages:
Insert two of the tripod legs in the TST tripod
holder (the third is meant to be left outside nestling
in the designated groove).
According to the size of the tripod in use
connect the 2 Slik-clip buckles of the pouch
to the appropriate lower parallel tabs.
It is possible to adjust the height of the TST
tripod holder for optimal weight distribution
by using any of the 3 sets of parallel tabs
set at various heights.
Secure the top part of the tripod with the
fastening strap .
Slide the strap through the two upper Slik-
clip buckles and fasten firmly.
Attachment stages:
Pouch
Fastening strap
Vertical connecting loops feature
on Kata backpacks
1
2 3 4
Slik-clip
connecting
buckle
1
2
3
1 1
2
2
BP-502
KT BP-502
R-102/3
KT R-102/3
HB-205/7
KT HB-205/7
Demo on BP-502
Demo on BP-502
Demo on R-102
Made of Taffeta Nylon with weather resistant
treatment. One side is Black and the other
side is reflective silver for hot days; the silver
side can also be used as a light reflector.
After use in rain you simply put it in the
provided mesh bag and hang it on the
outside of the bag.
Attach the Clip-On straps to your
Camera using the designated grooves.
Include:
2 Clip-On Camera straps the
1 Neck Extension strap.
Attach both Clip-On straps to the
harness using the designated D-Rings.
Specially designed Camera Straps can
be attached to the D-rings on the harness
to take the load off your neck.
These can easily be turned into a regular
camera strap by simply connecting to the
Neck Extension strap.
CAMERA STRAP
1
2
DS180506
Attachment stages:
Name:
Order code:
Neck
Extension strap
Remove the standard Camera strap
from your camera.
When you wish to use the Camera
without the Backpack.
Connect both Clip-On straps to the
Neck Extension.
3
1
2
3
Mesh Bag
Katas emergency Element Cover is
designed to protect your pack and
equipment in inclement weather.
DOUBLE ELEMENT COVER
Clip-On
Camera Strap
Development & production by KATA Ltd.
POB 45078 Jerusalem , Israel 91450
Tel: +972-2-5911000
Fax: + 972-2-5400504
www.kata-bags.com
Info: [email protected]
Sales: [email protected]
KATA. A SIMPLE CASE
OF BETTER DESIGN.
HB-205/7
KT HB-205/7
BP-502
KT BP-502
R-102/3
KT R-102/3
  • Page 1 1
  • Page 2 2

Kata R-103 User manual

R-103
Kata
Brand
Kata
Model
R-103
Category
Camera cases
Type
User manual
This manual is also suitable for

Kata R-103 is a versatile and modular backpack component designed to securely carry a tripod. It can be attached to various Kata backpacks, including the BP-502, R-102/3, and HB-205/7. The TST Tripod Holder includes a pouch and an upper fastening strap for added security. It features adjustable height and multiple attachment points for optimal weight distribution. Whether you're hiking, traveling, or simply carrying your tripod around, the Kata R-103 provides a convenient and reliable solution for photographers on the go.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents