KUDA 093260 User manual

KUDA
Brand
KUDA
Model
093260
Category
Holders
Type
User manual

KUDA 093260 is a console designed to fit your Audi A4. It comes with a universal clamping plate that can be attached to the center tunnel of your car. The console can be positioned as illustrated in the instruction manual, and the included screw can be used to secure it to the clamping plate. The updated instructions are available on our website.

KUDA 093260 is a console designed to fit your Audi A4. It comes with a universal clamping plate that can be attached to the center tunnel of your car. The console can be positioned as illustrated in the instruction manual, and the included screw can be used to secure it to the clamping plate. The updated instructions are available on our website.

Konsole wie abgebildet positionieren, Blech dabei einschieben
Position console as illustrated, insert metal plate at the same time
Beiliegendes Uni-Klemmblech unter den Mitteltunnel schieben
Insert enclosed universal clamping plate under covering
Einbauanleitung
installation instruction
Änderungen vorbehalten
Subject to change
Audi A4 093260
Art.-Nr.:
item#
Beiliegende Schraube durch die eingearbeitete Mulde der Konsole und
dem Uniklemmblech eindrehen
Mount enclosed screw through depression of console and universal
clamping plate
07.06.2005
Kuda-Phonebase GmbH
Industriestraße 16
D-49401 Damme
tel: +49 5491 9695 -0
fax: +49 5491 9695 -30
eMail: [email protected]
net: www.kuda-phonebase.de
Audi A4 093260
Positionnez la console comme illustré, en même temps poussez la
tôle
Posicione la consola como mostrado y al mismo tiempo introduzca la
chapa
Poussez la tôle de serrage universelle jointe sous le tunnel du véhicule
Meta la chapa universal adjunta bajo la consola central
Vissez la vis jointe à travers le renfoncement préformé de la console et
la tôle de serrage universelle.
Atornille el tornillo adjunto por la depresión de la consola y por la
chapa universal de sujeción
art:
Instructions d´ installation
instrucciones de instalación
Nous nous réservons la possibilité de modification
Salvo posibles modificaciones
07.06.2005
Kuda-Phonebase GmbH
Industriestraße 16
D-49401 Damme
tel: +49 5491 9695 -0
fax: +49 5491 9695 -30
eMail: [email protected]
net: www.kuda-phonebase.de
Console zoals afgebeeld positioneren, plaat daarbij er tussen schuiven
Konsole jak na obrazku umiejscowic i blaszke wsunac
Meegeleverde Uniklem onder de tunnel schuiven
Zalaczona blaszke uniwersalna nalezy wsunac pod tunel przy skrzyni
biegów
Meegeleverde schroef door de daarvoor bestemde ruimte in de konsole
en uniklem draaien
W wyrobione wglebienie w uchwycie i podlozona uniwersalna blaszke
nalezy wkrecic zalaczona srube.
Nous nous réservons la possibilité de modification
Salvo posibles modificaciones
Audi A4
art:
installatie instructie
instrukcja montazu
.
093260
07.06.2005
Kuda-Phonebase GmbH
Industriestraße 16
D-49401 Damme
tel: +49 5491 9695 -0
fax: +49 5491 9695 -30
eMail: [email protected]
net: www.kuda-phonebase.de
  • Page 1 1
  • Page 2 2
  • Page 3 3

KUDA 093260 User manual

KUDA
Brand
KUDA
Model
093260
Category
Holders
Type
User manual

KUDA 093260 is a console designed to fit your Audi A4. It comes with a universal clamping plate that can be attached to the center tunnel of your car. The console can be positioned as illustrated in the instruction manual, and the included screw can be used to secure it to the clamping plate. The updated instructions are available on our website.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents