2. Computers & electronics
  3. Telecom & navigation
  4. Mobile phones
  5. Car kits
  6. Toro
  7. Deck Hanger Kit, 2011 and Before TITAN ZX/MX Series Zero-Turn-Radius Riding Mower

Toro Deck Hanger Kit, 2011 and Before TITAN ZX/MX Series Zero-Turn-Radius Riding Mower Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Deck Hanger Kit, 2011 and Before TITAN ZX/MX Series Zero-Turn-Radius Riding Mower Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3372-992RevA
DeckHangerKit
2011andBeforeTITANZero-Turn-RadiusRidingMower
ModelNo.121-5747
InstallationInstructions
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
Flangebushing2
1
Metalgusset2
Installtherearangebushings.
Flangebushing2
2
Metalgusset2
Installthefrontangebushings.
1
InstallingtheRearFlange
Bushings
Partsneededforthisprocedure:
2Flangebushing
2Metalgusset
Procedure
1.Place2blocks(2x4)undereachsideofthemower
deckandlowerthedeckdownontotheboards.
2.Removethe4hairpincottersandwashersfromthe
deckhangerliftlinksandremovethelinksfromthe
mowerdeck(Figure1).
1
g018039
1
Figure1
1.Hairpincotters,washersanddeckhangerliftlinks
3.Removethetwonutsandboltsateachexistingange
bushing(Figure2).
4.Turnbothangebushingssothattheopenendsare
facingdownward.
5.Pulltherearpivotbardown.
6.Removebothexistingangebushings.
7.Startingontherightside,installanewangebushing
betweenthestopandtheendofthebar.
8.Rotatetheangebushingsothattheopenendisfacing
upward.
9.Slidetheassemblyintoframe.
10.Installametalgussetontotheangebushingand
looselyinstalltheexistingnutsandbolts.
11.Ontheleftside,installanewangebushingintothe
frame,sothattheopenendoftheangebushingis
facingdownward.
12.Installthepivotrodintotheopenendoftheange
bushing.
13.Rotatetheangebushingsothattheopeningisfacing
upward.
14.Installametalgussetontotheangebushingand
installtheexistingnutsandbolts.
15.Tightenallfasteners.
©2012—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved
g018067
1
2
1
3
4
5
6
7
Figure2
1.Existingbolts5.Flangebushing
2.Newmetalgusset,
installed
6.Rearpivotbar
3.Existingnuts
7.Stopweldedonrearpivot
bar
4.Newmetalgusset
2
InstallingtheFrontFlange
Bushings
Partsneededforthisprocedure:
2Flangebushing
2Metalgusset
Procedure
1.Removethetwonutsandboltsateachexistingange
bushing(Figure3).
2.Lowerthefrontpivotbar.
3.Removetheexistingangebushings.
4.Installthenewangebushingsontothefrontpivotbar.
5.Installthefrontpivotbarwiththenewangebushings
intotheframe.
6.Securetheangebushingsandmetalgussetstothe
framewiththepreviouslyremovednutsandbolts
(Figure3).
2
1
3
4
5
g018066
6
Figure3
1.Existingbolts4.Flangebushing
2.Existingnuts5.Newmetalgusset,
installed
3.Newmetalgusset6.Frontpivotbar
7.Installthe2frontdeckhangerliftlinkstothedeck
usingthe2hairpincottersandwashers.
8.Installthe2reardeckhangerliftlinkstothedeckusing
the2hairpincottersandwashers.
9.Verifyproperoperation.
2
/