Delta 35777LF-RB Dimensions Guide

Category
Sanitary ware
Type
Dimensions Guide

This manual is also suitable for

Delta 35777LF-RB is a bathroom faucet with a two-handle widespread deck mount. It has a solid brass fabricated end valve body and hot and cold stems that are interchangeable. The faucet has a 1/4 turn handle stop and 1/2"-14 NPSM adapters. The control mechanism is a rotating cylinder type with stainless steel plate and 90° rotation, with replaceable non-metallic seats. The faucet also has a drain with plastic pop-up type fitting with plated flange and stopper. The standard mounting deck thickness can be extended by 1" with RP10612. The faucet complies with ASME A112.18.1 / CSA B125.

Delta 35777LF-RB is a bathroom faucet with a two-handle widespread deck mount. It has a solid brass fabricated end valve body and hot and cold stems that are interchangeable. The faucet has a 1/4 turn handle stop and 1/2"-14 NPSM adapters. The control mechanism is a rotating cylinder type with stainless steel plate and 90° rotation, with replaceable non-metallic seats. The faucet also has a drain with plastic pop-up type fitting with plated flange and stopper. The standard mounting deck thickness can be extended by 1" with RP10612. The faucet complies with ASME A112.18.1 / CSA B125.

35777LF
Submitted Model No.:
Designate proper nish sufx
Delta reserves the right (1) to make changes in specications and materials, and (2) to change or discontinue
models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or
www.deltafaucet.com for nish options and product availability.
DSP-L-35777LF Rev. B
Two Handle Widespread Deck Mount
STANDARD SPECIFICATIONS:
• Max low rate 1.2 gpm @ 60 psi, 4.5 L/min @ 414 kPa
• Three hole mount
• Solid brass fabricated end valve body
• Hot and cold stems are interchangeable
• All operating parts are replaceable from the top
• 1/4 turn handle stops
• 1/2"-14 NPSM adapters
• Control mechanism is a rotating cylinder type with
stainless steel plate and 90° rotation, with replaceable
non-metallic seats
• Models have drain with plastic pop-up type itting with
plated lange and stopper
• Note: Standard mounting deck thickness can be exended
by 1" with RP10612
Specific Features:
6" to 16"
(152 mm to 406mm)
Centers
3 5/8"
(93 mm)
2 7/8"
(73 mm)
2X 1 15/16"
(50 mm)
Dia
3 X 1 1/8"~
1 1/2"
(29~38 mm)
Hole Size
1 3/16"
(29mm)
1 1/4"
(32 mm)
Max. Deck
Thickness
2 3/16"
(55 mm)
Dia
5 9/16"
(142 mm)
Min. 2 1/2" (64 mm)
Clearance to Back Splash
Recommended
2 1/8"
(54 mm)
Dia.
1 5/8" (42 mm)
to
2 3/8" (61 mm)
3 1/2"
(89 mm)
4 7/8"
(124 mm)
1 1/4"
(32 mm)
Dia.
5 1/8"
(130 mm)
6 9/16"
(166 mm)
1/2" NPSM
5 7/16"
(138mm)
Mylan
TM
Bath Collection
BATHROOM FAUCET
Delta Faucet Company
55 E. 111th Street, Indianapolis, IN 46280
350 South Edgeware Road, St. Thomas, ON N5P 4L1
© 2019 Delta Faucet Company
WARRANTY
Parts and Finish - Lifetime limited warranty; or for
commercial purchasers, 10 years for multi-family
residential (apartments and condominiums) and
5 years for all other commercial uses, in each case
from the date of purchase.
Electronic Parts and Batteries (if applicable) - 5
years from the date of purchase; or for commercial
purchasers, 1 year from the date of purchase. No
warranty is provided on batteries.
COMPLIES WITH:
ASME A112.18.1 / CSA B125.1
ASME A112.18.2 / CSA B125.2
Indicates compliance to
ICC/ANSI A117.1
EPA WaterSense
®
Verified compliant with 0.25% weighted average Pb
content regulations.
  • Page 1 1

Delta 35777LF-RB Dimensions Guide

Category
Sanitary ware
Type
Dimensions Guide
This manual is also suitable for

Delta 35777LF-RB is a bathroom faucet with a two-handle widespread deck mount. It has a solid brass fabricated end valve body and hot and cold stems that are interchangeable. The faucet has a 1/4 turn handle stop and 1/2"-14 NPSM adapters. The control mechanism is a rotating cylinder type with stainless steel plate and 90° rotation, with replaceable non-metallic seats. The faucet also has a drain with plastic pop-up type fitting with plated flange and stopper. The standard mounting deck thickness can be extended by 1" with RP10612. The faucet complies with ASME A112.18.1 / CSA B125.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI