H.K. Porter 0190MHC Specification

Type
Specification

This manual is also suitable for

HKP Powerlink
TM
.
Your link to the future
of bolt cutters.
HKP Powerlink
... More power with 30%
less effort.
0190MCD
24" Power Link
Bolt Cutter
0090MCD
18" Power Link
Bolt Cutter
Revolutionary Powerlink™ Technology
The unique Powerlink geometry was developed using advanced
computer-aided design to create a double compound action system
with greater efficiency than traditional bolt cutters. Together with
special engineered HKP center cut blades, Powerlink bolt cutters
deliver superior cutting power and industry leading blade durability.
Tubular steel handles and forged Powerlinks deliver ultimate
toughness, allowing the tool to stand up in the harshest working
environments. It’s the perfect solution for production facilities,
maintenance and repair operations, utilities, construction sites, oil
and gas operations, and more.
Ultimate Blade
Durability
Precision ground,
induction hardened cutting
blades for extended edge
life and cutting hard
materials.
High-Performance
Handles
Tubular Steel handles for extra
strength and cutting power.
Dual forged Powelink provides more
power and a 30% effort reduction for
easier cutting.
How HKP Powerlink Bolt Cutters Compare*
HKP
RIDGID
GREENLEE
KLEIN TOOLS
5/16"
STEEL ROD
HRC 48
HKP
RIDGID
GREENLEE - Blade Failure
KLEIN TOOLS - Blade Failure
Effort to Cut
7/16"
STEEL ROD
HRC 31
Effort to Cut
Exceptional Capacity
Cuts harder and larger diameter
materials up to 5/16” HRC 48 materials
for 24” model and 9/32” HRC 48 for
the 18” model.
Apex Tool Group, LLC
14600 York Road, Suite A
Sparks, Maryland 21152
www.apextoolgroup.com
ITEM NO. T550945 / ??????? / 5M / PRINTED 7/15 / ATG-2054 ©2015 Apex Tool Group, LLC
H.K. PORTER
®
and HKP
®
are registered trademarks of Apex Brands, Inc., a Division of Apex
Tool Group, LLC
*Comparison based on cut testing of Ridgid 14223 S24, Greenlee HDBC24, Klein 63324, and
H.K. Porter 0190MCD bolt cutters, conducted by Apex Tool Group on 3-25-14.
Specifications subject to change without notice.
Bolts, Rods
Screws, Rivets
Chain
Chain link
Fence
Nails, Cotter
Pins
Tire Chains
Wrought IronWire, Bailing
Wire, Copper
Shelving, Wire
Wire, Electric
Chain, Hard
Alloy
Rod,
Reinforcing
Mesh,
Reinforcing
Strapping Steel
Padlock Hasps
Wire Spring
Nut Splitting
Catalog No Description
0090MCD 18" Powerlink Bolt Cutter 3/8" 9/32"
0190MCD 24" Powerlink Bolt Cutter 7/16" 5/16"
Versatile Powerlink Bolt Cutters cut these
common materials and more.
HKP Powerlink
... Another Powerful
Innovation from H. K. Porter
Threaded Rod
Capacity
Soft to Medium-
Hard Materials
HRC 31
Hard Materials
HRC 48
Never use any H.K. PORTER
®
cutters on energized circuts, wire, or cable
Always wear eye protection, user and bystander
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

H.K. Porter 0190MHC Specification

Type
Specification
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI