Hydro Systems KEL7040ATO-WHI, ARL7040TOW Specification

  • Hello! I am an AI chatbot trained to assist you with the Hydro Systems KEL7040ATO-WHI Specification. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
KELLIE
DESIGNER COLLECTION
OptiOns
*Colonial Grab Bars
*Linear Integral Waste and Overflow
*Chromatherapy-LED Lighting System
Microban Antibacterial Protection
Extra high density fiberglass
Thermal Air
- 1 -15 AMP Dedicated GFI
- Blower must be remotely located
Tower
Hydro Coat
Hydro Express quick ship
29132 Avenue Paine. Valencia, CA, 91355
661.775.0686 | hydrosystem.com
* Indicates options that are shown (listed in order from top to bottom/
left to right)
Page 1 of 2
Features include:
Standard Integral Waste and Overflow
Towel Bar
Adjustable Legs
OptiOn electrical requirements
Thermal Air 1 15amp - 115V dedicated GFCI
KELLIE
DESIGNER COLLECTION
as shOwn:
Acrylic Tub
Features shOwn:
Towel Bar
ava i l a b l e sy s t e m s :
Soaking tub only
Thermal Air
size:
70.40.26
water capacity:
90 Gallons
weight:
150 lbs. Tub Only
180 lbs. Thermal Air
mOdel 7040 dimensiOns:
(L)ength- 70”
(W)idth- 40”
(H)eight Finish- 26”
Back Slope - 26°
acrylic tub
Acrylic models finished in 1/8” thick layer of deep lustrous acrylic
Extra thick reinforced fiberglass
Slip resistant bottom
Integral overflow, p-trap located directly below waste
29132 Avenue Paine. Valencia, CA, 91355
661.775.0686 | hydrosystem.com
All specications and options subject to change without notice please
contact a Hydro Systems representative for more information.
Certain options or altering the pump/blower location may cause
the pump/blower to extend beyond the tub decking. For cutout
dimensions wait for unit to arrive. All specications subject to change
without notice.
CODES AND COMPLIANCES
Massachusetts code File no: P1-0614-491
Page 2 of 2
12.5
40
70
40 22
3.5
20
19.5
48
None
2
air inlet
Acrylic and Fiberglass, ¼" nominal thickness
26
15
30
jUNE 2017
HYDRO SYSTEMS, INC.
29132 Avenue Paine, Valencia, CA 91355
661.775.0686, fax 661.775.0668, www.hydrosystem.com
Date:
Scale:
Title:
KELLIE
Material:
Rev:
Date:
Note: The information contained on
this drawing is the sole property of
Hydro Systems, Inc. Any
reproduction in part or as a whole
without the written permission of
Hydro Systems, Inc. is prohibited.
air inlet
/