Simplicity 076240-00 is a versatile and feature-rich lawn tractor that offers a range of capabilities to enhance your lawn care experience. Equipped with a powerful 24 HP Briggs & Stratton Intek engine, this lawn tractor delivers reliable performance for tackling tough mowing tasks. Its 48-inch cutting deck, with adjustable cutting heights from 1.5 inches to 4 inches, allows you to achieve a precise and even cut for a well-manicured lawn. The hydrostatic transmission provides smooth and effortless speed control, enabling you to navigate around obstacles and uneven terrain with ease.
Simplicity 076240-00 is a versatile and feature-rich lawn tractor that offers a range of capabilities to enhance your lawn care experience. Equipped with a powerful 24 HP Briggs & Stratton Intek engine, this lawn tractor delivers reliable performance for tackling tough mowing tasks. Its 48-inch cutting deck, with adjustable cutting heights from 1.5 inches to 4 inches, allows you to achieve a precise and even cut for a well-manicured lawn. The hydrostatic transmission provides smooth and effortless speed control, enabling you to navigate around obstacles and uneven terrain with ease.
Questions?
Help is just a moment away!
Call: Technical Services
800-732-2989
Monday-Friday 8:00 AM to 5:00 PM Central Time
ComAp InteliLite NT®
Standby Generator Control Board
Table of Contents
Important Safety Instructions........................3
Operator Interface ...............................4
Display Screen Structure...........................5
Alarms .......................................6
Browsing ECU Alarms.............................6
SETPOINT CHANGE...............................7
ENTERING PASSWORD ............................7
CONTROLLER INFORMATION SCREEN .................8
DISPLAY CONTRAST ADJUST .......................9
NOTES ...................................... 10
NOTES ...................................... 11
Briggs & Stratton Power Products Group, LLC
P.O. Box 702
Milwaukee, WI 53201-0702
Copyright © 2013. All rights reserved. No part of this material
may be reproduced or transmitted in any form without the express
written permission of Briggs & Stratton Power Products Group, LLC.
InteliLite NT is a registered trademark used under permission of
ComAp LLC.
3
Important Safety Instructions
SAVE THESE INSTRUCTIONS - This manual contains important
instructions that should be followed during installation of
the equipment.
Safety Symbols and Meanings
The safety alert symbol indicates a potential personal injury
hazard. A signal word (DANGER, WARNING, or CAUTION) is used
with the alert symbol to designate a degree or level of hazard
seriousness. A safety symbol may be used to represent the type of
hazard. The signal word NOTICE is used to address practices not
related to personal injury.
DANGER indicates a hazard which, if not avoided, will result in
death or serious injury.
WARNING indicates a hazard which, if not avoided, could result
in death or serious injury.
CAUTION indicates a hazard which, if not avoided, could result
in minor or moderate injury.
NOTICE addresses practices not related to personal injury.
The manufacturer cannot possibly anticipate every possible
circumstance that might involve a hazard. The warnings in this
manual, and the tags and decals affixed to the unit are, therefore,
not all-inclusive. If you use a procedure, work method or operating
technique that the manufacturer does not specifically recommend,
you must satisfy yourself that it is safe for you and others. You
must also make sure that the procedure, work method or operating
technique that you choose does not render the equipment unsafe.
Electrical Shock
Read Manual
NOTICE Only qualified, licensed electricians should
attempt installation of this equipment, which must
strictly comply with applicable codes, standards and
regulations.
WARNING Certain components in this product and
related accessories contain chemicals known to the
State of California to cause cancer, birth defects, or
other reproductive harm. Wash hands after handling.
WARNING Failure to properly ground equipment
could cause electrocution resulting in death or
seriousinjury.
• Do not touch bare wires.
• Do not use equipment with worn, frayed, bare or
otherwise damaged wiring.
• Do not handle electrical cords while standing in water,
while barefoot, or while hands or feet are wet.
• If you must work around a unit while it is operating,
stand on an insulated dry surface to reduce shock
hazard.
• Do not allow unqualified persons or children to operate
or service equipment.
• In case of an accident caused by electrical shock,
immediately shut down all sources of electrical power
and contact local authorities. Avoid direct contact with
the victim.
NOTICE Improper treatment of equipment could damage
it and shorten its life.
• Use equipment only for intended uses.
• If you have questions about intended use, ask dealer or
contact Briggs & Stratton Power Products.
• Do not expose equipment to excessive moisture, dust, dirt, or
corrosive vapors.
• Remain alert at all times while working on this equipment.
Never work on the equipment when you are physically or
mentally fatigued.
Save These Instructions
4 BRIGGSandSTRATTON.COM
Operator Interface
Control Buttons
Position Button Description
A Start Button
Works in MANUAL MODE only. Press this button to initiate the start sequence of the engine.
B Stop Button
Works in MANUAL MODE only. Press this button to initiate the stop sequence of the engine.
Repeated pressing or holding the button for more than 2 seconds will cancel current phase of the
stop sequence (like ramping the power down or cooling) and next phase will continue.
C Fault Reset
Use this button to acknowledge alarms and deactivate the horn output. Inactive alarms will
disappear immediately and status of active alarms will be changed to “confirmed” so they will
disappear.
D Horn Reset
Use this button to deactivate the horn output without acknowledging the alarms.
E Supplying Load
This LED is not used on these models.
F
Ready / Auto Indicates the generator is in AUTO mode and ready for operation.
G Warning
Indicates a generator warning is present.
H Running
Indicates generator is running.
J
Not in Auto Indicates the generator is not in AUTO mode.
K Alarm
Indicates a generator alarm is present.
L Enter Button
Use this button to finish editing a setpoint or moving “right” in the history page.
M Down Button
Use this button to move down or decrease a value.
N Up Button
Use this button to move up or increase a value.
P Page Button
Use this button to switch over display pages.
R LCD Display
Black/White display screen.
S Mode Left
Use this button to change the mode. The button works only if the main screen with the indicator
of currently selected mode is displayed.
T Mode Right
Use this button to change the mode. The button works only if the main screen with the indicator
of currently selected mode is displayed.
A
M
N
B
C
D
L
P
TS
K J H
G F E
R
5
Display Screen Structure
The displayed information is structured into pages and
screens.
Use the PAGE button to switch over the pages.
1. The page Measurement consists of screens which
display measured values like voltages, current, oil
pressure etc., computed values like i.e. gen-set power,
statistic data and the alarm list on the last screen.
2. The page Setpoints contains all setpoints organized to
groups and also a special group for entering password.
3. The page History log shows the history log in the order
that the last record is displayed first.
Generator
L1N 0 L1L2 0V
L1N 0 L1L2 0V
L1N 0 L1L2 0V
Gen freq 0.0Hz
0 0 0 A
OFF MAN AUT
Not ready
RPM 0
No Timer
0 0
ECU AlarmList
>EngOil Press
000225 (000E1h)
FC 100 OC 4 FMI 1
AlarmList 1
Emergency Stop
Password
>Basic Settings
Engine Params
Engine Protect
Gener Protect
AutoMains Fail
Extension I/O
Date/Time
Page
Gen-set Name
>Nominal Power
200 kW
Nomin Current
350 A
CT Ratio
2000 /5A
Gen-set Name
>Nominal Power
250 200 kW
Nomin Current
350 A
CT Ratio
2000 /5A
No. Reason
> 0 Switched On
-1 Fault reset
-2 Emergency Stop
-3 Wrn RA15 Fail
-4 Sprinkler Set
-5 Config Loaded
13:02:17 07/08/2008
Time Date
>13:02:17 07/08/2008
13:00:46 07/08/2008
13:00:46 07/08/2008
13:00:45 07/08/2008
13:00:45 07/08/2008
13:00:43 07/08/2008
0 Switched On
Mode RPM Pwr
> OFF 0 0
OFF 0 0
OFF 0 0
OFF 0 0
OFF 0 0
OFF 0 0
0 Switched On
Page
Page
Page
Page
Page
Page
Page
Enter
Enter
Enter
Enter
Page
Enter
Enter Page
MEASUREMENT SETPOINTS HISTORY LOG
V
6 BRIGGSandSTRATTON.COM
Alarms
AlarmList 3
*MCB Fail
*Emergency Stop
Sd Override
Inactive unconfirmed alarm
Active unconfirmed alarm
Active confirmed alarm
Browsing ECU Alarm Examples
alarm
deactivation
ECU AlarmList
>*EngOil Press
*EngCool Temp
Coolant Level
FC 100 OC 4 FMI 1
ECU AlarmList
>EngOil Press
Coolant Level
FC 100 OC 4 FMI 1
ECU AlarmList
>
FC 0 OC 0 FMI 0
ECU AlarmList
*EngOil Press
>*EngCool Temp
Coolant Level
FC 110 OC 1 FMI 0
Enter
ECU AlarmList
*EngOil Press
*EngCool Temp
>Coolant Level
FC 111 OC 2 FMI 2
Enter
Enter
Enter +
Fault
reset
ECU AlarmList
>*EngOil Press
*EngCool Temp
FC 100 OC 4 FMI 1
Enter +
Fault
reset
alarm
deactivation
7
SETPOINT CHANGE
ENTERING PASSWORD
OFF MAN AUT
Not ready
RPM 0
No Timer
0 0
Password
>Basic Settings
Engine Params
Engine Protect
Gener Protect
AutoMains Fail
Extension I/O
Date/Time
Enter
Page
Enter
Enter Page
Page
Gen-set Name
>Nominal Power
200 kW
*Nomin Current
350 A
CT Ratio
2000 /5A
Gen-set Name
>Nominal Power
250 200 kW
*Nomin Current
350 A
CT Ratio
2000 /5A
V
OFF MAN AUT
Not ready
RPM 0
No Timer
0 0
>Password
Basic Settings
Engine Params
Engine Protect
Gener Protect
AutoMains Fail
Extension I/O
Date/Time
>EnterPassword
Changepassword
Enter
Page
Enter
Enter Page
>EnterPassword
0
Changepassword
Page
V
8 BRIGGSandSTRATTON.COM
OFF MAN AUT
Not ready
RPM 0
No Timer
0 0
InteliLite NT
ComAp 2007-2008
IL-NT-x.y
Serial:12345678
SW ver: x.y, x.y
Appl : AMF25
Branch: Standard
Page
Languages
>English
Chinese
Enter + Page
User interface:
User
>Engineer
Serial: 12345678
Pwd. dec.: 1234567890
Page
Page
Enter
Enter
V
CONTROLLER INFORMATION SCREEN
9
DISPLAY CONTRAST ADJUST
OFF MAN AUT
Not ready
RPM 0
No Timer
0 0
Enter +
Enter +
OFF MAN AUT
Notready
RPM 0
No Timer
0 0
OFF MAN AUT
Notready
RPM 0
No Timer
0 0
V
V
V
10 BRIGGSandSTRATTON.COM
NOTES
Page is loading ...
Page Intentionally Left Blank
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
17
Estructura de la pantalla
La información que se muestra está estructurada en páginas
y pantallas.
Use el botón PAGE (BUSCAR) para navegar por las páginas.
1. La página Measurement (Medición) consta de pantallas
que muestran valores medidos como tensiones,
corrientes, presión de aceite, etc.,
valores calculados como potencia del equipo del
generador, datos estadísticos y lista de alarmas en la
última pantalla.
2. La página Setpoints (Puntos de referencia) contiene
todos los puntos de referencia organizados en grupos
y, además, un grupo especial para ingresar
una contraseña.
3. La página History log (Registro del historial) muestra
el registro del historial ordenado de forma tal que se
muestra primero el último registro.
Generator
L1N 0 L1L2 0V
L1N 0 L1L2 0V
L1N 0 L1L2 0V
Gen freq 0.0Hz
0 0 0 A
OFF MAN AUT
Not ready
RPM 0
No Timer
0 0
ECU AlarmList
>EngOil Press
000225 (000E1h)
FC 100 OC 4 FMI 1
AlarmList 1
Emergency Stop
Password
>Basic Settings
Engine Params
Engine Protect
Gener Protect
AutoMains Fail
Extension I/O
Date/Time
Page
Gen-set Name
>Nominal Power
200 kW
Nomin Current
350 A
CT Ratio
2000 /5A
Gen-set Name
>Nominal Power
250 200 kW
Nomin Current
350 A
CT Ratio
2000 /5A
No. Reason
> 0 Switched On
-1 Fault reset
-2 Emergency Stop
-3 Wrn RA15 Fail
-4 Sprinkler Set
-5 Config Loaded
13:02:17 07/08/2008
Time Date
>13:02:17 07/08/2008
13:00:46 07/08/2008
13:00:46 07/08/2008
13:00:45 07/08/2008
13:00:45 07/08/2008
13:00:43 07/08/2008
0 Switched On
Mode RPM Pwr
> OFF 0 0
OFF 0 0
OFF 0 0
OFF 0 0
OFF 0 0
OFF 0 0
0 Switched On
Page
Page
Page
Page
Page
Page
Page
Enter
Enter
Enter
Enter
Page
Enter
Enter Page
MEASUREMENT SETPOINTS HISTORY LOG
V
18 BRIGGSandSTRATTON.COM
Alarmas
AlarmList 3
*MCB Fail
*Emergency Stop
Sd Override
Inactive unconfirmed alarm
Active unconfirmed alarm
Active confirmed alarm
Exploración de ejemplos de alarma ECU
alarm
deactivation
ECU AlarmList
>*EngOil Press
*EngCool Temp
Coolant Level
FC 100 OC 4 FMI 1
ECU AlarmList
>EngOil Press
Coolant Level
FC 100 OC 4 FMI 1
ECU AlarmList
>
FC 0 OC 0 FMI 0
ECU AlarmList
*EngOil Press
>*EngCool Temp
Coolant Level
FC 110 OC 1 FMI 0
Enter
ECU AlarmList
*EngOil Press
*EngCool Temp
>Coolant Level
FC 111 OC 2 FMI 2
Enter
Enter
Enter +
Fault
reset
ECU AlarmList
>*EngOil Press
*EngCool Temp
FC 100 OC 4 FMI 1
Enter +
Fault
reset
alarm
deactivation
Alarma inactiva sin confirmar
Alarma activa sin confirmar
Alarma activa confirmada
19
CAMBIO DE PUNTO
DE REFERENCIA
INGRESO DE CONTRASEÑA
OFF MAN AUT
Not ready
RPM 0
No Timer
0 0
Password
>Basic Settings
Engine Params
Engine Protect
Gener Protect
AutoMains Fail
Extension I/O
Date/Time
Enter
Page
Enter
Enter Page
Page
Gen-set Name
>Nominal Power
200 kW
*Nomin Current
350 A
CT Ratio
2000 /5A
Gen-set Name
>Nominal Power
250 200 kW
*Nomin Current
350 A
CT Ratio
2000 /5A
V
OFF MAN AUT
Not ready
RPM 0
No Timer
0 0
>Password
Basic Settings
Engine Params
Engine Protect
Gener Protect
AutoMains Fail
Extension I/O
Date/Time
>EnterPassword
Changepassword
Enter
Page
Enter
Enter Page
>EnterPassword
0
Changepassword
Page
V
20 BRIGGSandSTRATTON.COM
OFF MAN AUT
Not ready
RPM 0
No Timer
0 0
InteliLite NT
ComAp 2007-2008
IL-NT-x.y
Serial:12345678
SW ver: x.y, x.y
Appl : AMF25
Branch: Standard
Page
Languages
>English
Chinese
Enter + Page
User interface:
User
>Engineer
Serial: 12345678
Pwd. dec.: 1234567890
Page
Page
Enter
Enter
V
PANTALLA CONTROLLER INFORMATION (INFORMACIÓN DEL CONTROLADOR)
21
AJUSTE DE CONTRASTE DE LA PANTALLA
OFF MAN AUT
Not ready
RPM 0
No Timer
0 0
Enter +
Enter +
OFF MAN AUT
Notready
RPM 0
No Timer
0 0
OFF MAN AUT
Notready
RPM 0
No Timer
0 0
V
V
V
22 BRIGGSandSTRATTON.COM
Page Intentionally Left Blank
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
27
Structure de l’écran d’affichage
Les renseignements affichés sont présentés sur des pages et
des écrans.
Utilisez le bouton PAGE pour passer d’une page à l’autre.
1. La page Mesures est composée d’écrans qui affichent
des valeurs mesurées tells que des tensions, des
intensités, des pressions d'huile, etc., des valeurs
calculées tels que la puissance de la génératrice, des
données statistiques et la liste d'alarmes sur le
dernier écran.
2. La page RÉGLAGES est composée de tous les réglages
organisés en groupes et aussi un groupe spécial pour
l’entrée du mot de passe.
3. La page Historique présente le journal de l’historique
dans l’ordre d’affichage de l’entrée la plus récente
en premier.
Generator
L1N 0 L1L2 0V
L1N 0 L1L2 0V
L1N 0 L1L2 0V
Gen freq 0.0Hz
0 0 0 A
OFF MAN AUT
Not ready
RPM 0
No Timer
0 0
ECU AlarmList
>EngOil Press
000225 (000E1h)
FC 100 OC 4 FMI 1
AlarmList 1
Emergency Stop
Password
>Basic Settings
Engine Params
Engine Protect
Gener Protect
AutoMains Fail
Extension I/O
Date/Time
Page
Gen-set Name
>Nominal Power
200 kW
Nomin Current
350 A
CT Ratio
2000 /5A
Gen-set Name
>Nominal Power
250 200 kW
Nomin Current
350 A
CT Ratio
2000 /5A
No. Reason
> 0 Switched On
-1 Fault reset
-2 Emergency Stop
-3 Wrn RA15 Fail
-4 Sprinkler Set
-5 Config Loaded
13:02:17 07/08/2008
Time Date
>13:02:17 07/08/2008
13:00:46 07/08/2008
13:00:46 07/08/2008
13:00:45 07/08/2008
13:00:45 07/08/2008
13:00:43 07/08/2008
0 Switched On
Mode RPM Pwr
> OFF 0 0
OFF 0 0
OFF 0 0
OFF 0 0
OFF 0 0
OFF 0 0
0 Switched On
Page
Page
Page
Page
Page
Page
Page
Enter
Enter
Enter
Enter
Page
Enter
Enter Page
MEASUREMENT SETPOINTS HISTORY LOG
V
28 BRIGGSandSTRATTON.COM
Alarmes
AlarmList 3
*MCB Fail
*Emergency Stop
Sd Override
Inactive unconfirmed alarm
Active unconfirmed alarm
Active confirmed alarm
Parcourir les exemples d’alarmes d’ECU
alarm
deactivation
ECU AlarmList
>*EngOil Press
*EngCool Temp
Coolant Level
FC 100 OC 4 FMI 1
ECU AlarmList
>EngOil Press
Coolant Level
FC 100 OC 4 FMI 1
ECU AlarmList
>
FC 0 OC 0 FMI 0
ECU AlarmList
*EngOil Press
>*EngCool Temp
Coolant Level
FC 110 OC 1 FMI 0
Enter
ECU AlarmList
*EngOil Press
*EngCool Temp
>Coolant Level
FC 111 OC 2 FMI 2
Enter
Enter
Enter +
Fault
reset
ECU AlarmList
>*EngOil Press
*EngCool Temp
FC 100 OC 4 FMI 1
Enter +
Fault
reset
alarm
deactivation
Alarme non confirmée inactive
Alarme non confirmée active
Alarme confirmée active
29
CHANGEMENT DE RÉGLAGE
ENTRÉE DE MOT DE PASSE
OFF MAN AUT
Not ready
RPM 0
No Timer
0 0
Password
>Basic Settings
Engine Params
Engine Protect
Gener Protect
AutoMains Fail
Extension I/O
Date/Time
Enter
Page
Enter
Enter Page
Page
Gen-set Name
>Nominal Power
200 kW
*Nomin Current
350 A
CT Ratio
2000 /5A
Gen-set Name
>Nominal Power
250 200 kW
*Nomin Current
350 A
CT Ratio
2000 /5A
V
OFF MAN AUT
Not ready
RPM 0
No Timer
0 0
>Password
Basic Settings
Engine Params
Engine Protect
Gener Protect
AutoMains Fail
Extension I/O
Date/Time
>EnterPassword
Changepassword
Enter
Page
Enter
Enter Page
>EnterPassword
0
Changepassword
Page
V
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
Simplicity 076240-00 is a versatile and feature-rich lawn tractor that offers a range of capabilities to enhance your lawn care experience. Equipped with a powerful 24 HP Briggs & Stratton Intek engine, this lawn tractor delivers reliable performance for tackling tough mowing tasks. Its 48-inch cutting deck, with adjustable cutting heights from 1.5 inches to 4 inches, allows you to achieve a precise and even cut for a well-manicured lawn. The hydrostatic transmission provides smooth and effortless speed control, enabling you to navigate around obstacles and uneven terrain with ease.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- français: Simplicity 076240-00 Manuel utilisateur
- español: Simplicity 076240-00 Manual de usuario
Related papers
-
Simplicity 076342-01 User manual
-
-
-
Simplicity 040609-00 User manual
-
-
Simplicity 040663 Installation guide
-
-
-
-
Other documents
-
Comap L151002001 User manual
-
Comap InteliLite 9 Global Manual
-
Kohler 500REZK Operating instructions
-
-
Generac MGG450 Owner's manual
-
-
-
-
-