Toro Wire Nut and Epoxy Kit, Low Voltage Lights

This kit replaces the cable connector used to install a replacement power pack or is used to splice a replacement power pack into the main cable line of your Toro lighting system.

• The kit includes:
  • Wire Nuts (2)
  • Epoxy Pack (1)
  • Twist Tie (1)
• The epoxy bag is clear and has a paper packet around it.
• The kit is used to seal the wire nuts in an epoxy bag.
• The epoxy bag is harmful if inhaled, swallowed, or if it gets on your skin or in your eyes, so it should be used in a well-ventilated area, avoiding skin and eye contact, and washing thoroughly with soap and water after using.