Draw-Tite 75280 Installation guide

Brand: Draw-Tite

Model: 75280

Type: Installation guide

J-PIN

(Order Separately)

OPTIONAL LOCKING STABILIZING PIN

DO NOT EXCEED LOWER OF

TOWING VEHICLE MFR'S RATINGS OR

WEIGHT CARRYING

BALL MOUNT

WEIGHT DISTRIBUTING

MAX TONGUE

WT(LB)

MAX GROSS

TRLR WT(LB)

HITCH TYPE ▼

500

5,000

600

6,000

HITCH SHOWN IN PROPER POSITION

FASCIA

BUMPER STRUCTURE

M12 X 1.25 X 35mm CL8.8

1/2 CONICAL TOOTHED WASHER

BOTH SIDES

M10 X 1.25 X 30mm CL8.8

7/16 CONICAL TOOTHED WASHER

EXISTING WELD NUTS

EQUIPMENT REQUIRED:

NONE

WIRING LOCATION:

PU1, PU2

DRILL BITS:

NONE

HITCH REQUIRES 5/8" PIN AND CLIP

IF STABILIZING PIN IS NOT USED

WRENCHES

(TIGHTEN ALL FASTENERS WITH TORQUE WRENCH)

10mm, 17mm, 19mm

LOWER THE EXHAUST AND REMOVE THE MUFFLER HEAT SHIELD.

RAISE THE HITCH INTO POSITION AS SHOWN.

INSTALL THE SIX (6) M12 FASTENERS INTO THE FRAME RAILS AND THE TWO (2) M10 FASTENERS

INTO THE BUMPER STRUCTURE AS SHOWN.

RE-INSTALL THE HEAT SHIELD AND THE EXHAUST.

TIGHTEN ALL M10 CL8.8 FASTENERS TO 42 FT.-LB.

TIGHTEN ALL M12 CL8.8 FASTENERS TO 76 FT.-LB.

HONDA RIDGELINE

11/26/07

70754N

44528N

75280N

75280F

INSTALLATION INSTRUCTIONS

NOTE:

Check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is

hitch or ball which has been damaged should be removed and replaced. Observe safety precautions

when working beneath a vehicle and wear eye protection. Follow car maker's specs for maximum trailer

weight and tongue weight. Do not cut access or attachment holes with a torch.

APPROX WEIGHT (LB.)

removed, plug all holes in trunk pan or other body panels to prevent entry of water and exhaust fumes. A

APPROX WEIGHT (LB.)

VEHICLE

FASTENER KIT

THIS PRODUCT COMPLIES WITH SAFETY SPECIFICATIONS AND REQUIREMENTS FOR CONNECTING DEVICES AND TOWING

SYSTEMS OF THE STATE OF NEW YORK AND V.E.S.C. REGULATION V-5.

Plymouth, Michigan

TOWING PRODUCTS

2005

Cequent Towing Products

SHEET___OF___

1 1

Draw-Tite 75280 Installation guide

Draw-Tite 75280 Installation guide

Draw-Tite 75280 Installation guide

Related papers

Other documents