JVC IYV*ID*VP User manual

Category
Cassette players
Type
User manual

This manual is also suitable for

QUICK START*
A GUIDE TO EASY SET UP AND USE
SET CLOCK
AND
TUNER
3
3
Dear Customer,
Thank you for purchasing
this JVC Video Cassette
Recorder.
PLAY BACK
A
TAPE
4
4
CHECK
PACKAGE
CONTENTS
1
1
5
5
2
2
RECORD
A
PROGRAM
SITUATE AND
CONNECT
VCR
1
1
MAKE SURE THAT YOUR PACKAGE
CONTAINS:
* Please refer to the HR-DVS1U’s instruction manual for more
detailed information.
MONO/Hi-Fi/Mini DV/SUPER VHS
VIDEO CASSETTE RECORDERS
U
Printed in Japan
0300 IYV
*
ID
*
VP
COPYRIGHT © 2000 VICTOR COMPANY OF JAPAN, LTD.
RF CABLE (F-TYPE)
VIDEO CASSETTE
RECORDER
“AA” BATTERY x 2
INFRARED
REMOTE
CONTROL
UNIT
LPT0383-002A
CONTROLLER
AUDIO/VIDEO
CABLE
S-VIDEO
CABLE
DV VHS
DUB
DV IN/OUT
VHSDV
S-VIDEO
PAUSE
VIDEO
A.DUB
INSERT
CH
POWER
EJECT
PLAY
STOP
EJECT
(MONO)L—AUDIO—R
REW
REC PAUSE
FF
PULL - OPEN PULL - OPEN
123
456
7
89
0
2
4
1
3
T W
DV VHS
ANTENNA
SPLITTER
POWER
CORD
The Path To
Enjoyment
Starts Here.
a–BASIC ANTENNA/CABLE CONNECTION
SITUATE AND CONNECT YOUR
NEW VCR
2
2
1 Place the VCR on a stable, horizontal
surface.
2 Disconnect your antenna or cable line
from your TV.
3 Connect your antenna to your VCR.
n Antenna Splitter n Antenna Splitter
n VHF/UHF Antenna Mixer
n RF Cable
n 300-75 ohm Matching
Transformer
CONNECTORS WHICH ARE OR MAY BE REQUIRED:
CABLE TV LINE
Note:
Exact connector positions and names may differ.
ANTENNA IN
VHF/UHF
VHF
VHF
UHF
UHF
UHF ONLY
VHF ONLY
SEPARATE VHF/UHF
COMBINED VHF/UHF
Back of VCR (example only) Back of TV (example only)
ANTENNA CONNECTION
4 Connect your VCR to your TV.
5 After completing the antenna
connection, go to 2b (AUDIO/VIDEO
CONNECTIONS).
Antenna
Splitter
n Antenna Splitter
c–CATV CONVERTER CONNECTION
ANTENNA IN
INOUT
CATV Input
From
Cable
Box
To TV
Cable
Box
TV
VCR
With this connection you can view/record any
cable channel including scrambled channels to
which you have subscribed.
ANTENNA IN
INOUT
CATV Input
Cable
Box
To TV
TV
VCR
With this connection, you can view one
scrambled cable channel while recording
another unscrambled channel.
To watch TV with this type of connection
1
Tune TV to Cable Box output channel.
2 Tune VCR to Cable Box output channel.
3 Select desired channel on Cable Box.
You can only view the channel you’re
recording.
You cannot change channels with the
VCR remote control.
To watch TV with this type of connection
1
Press CH or NUMBER keys to select desired
channel for recording.
2 Tune TV to Cable Box output channel.
3 Select desired channel on Cable Box.
You cannot record scrambled channels.
b–AUDIO/VIDEO CONNECTIONS
To Listen To VCR Sound Through A
Component Stereo Audio System,
Connect As Shown
AV connection methods differ from one type
of VCR to another. First, for any TV and VCR
type, connect your VCR to your TV using
antenna cables. Then make AV connections
following one of the methods pictured to the
right.
After making the connections, go to 3
(PLUG
& PLAY)
.
If you’re using a Cable Box, go to 2c
(CATV CONVERTER CONNECTION).
MONAURAL VHS VCR g AV TV
VIDEO OUT
AUDIO OUT
VIDEO IN
AUDIO IN
SUPER VHS VCR g AV STEREO TV WITH S-VIDEO
INPUT TERMINALS
VIDEO IN
S-VIDEO IN
VIDEO OUT
S-VIDEO OUT
R
AUDIO INAUDIO OUT
L
R
L
Hi-Fi VHS VCR g AV STEREO TV
VIDEO INVIDEO OUT
R
AUDIO INAUDIO OUT
L
R
L
AMP
VIDEO OUT
AUDIO OUT
R
L
VCR
TV
Monaural deck owners:
Connect to VCR's AUDIO
OUT
For the component video connection, refer to page 7 of the
HR-DVS1U’s instruction manual.
PLUG & PLAY
3
3
SET YOUR VCR'S CLOCK AND
TUNER
The VCR's clock and tuner channels are set automatically when the VCR is plugged into the AC
outlet.
If you use a cable box, Plug & Play will not function; set the clock and tuner channels manually.
(
Z pg.10 – 14 of the HR-DVS1U’s instruction manual)
1
Plug the VCR into the
AC outlet.
2
Don’t press any buttons on the VCR or remote
during auto setup.
3
“AUTO” blinks while the VCR automatically
sets the clock using information provided by
the local PBS channel.
NOTES:
If the time displayed in is incorrect, perform the Semi-Auto or Manual Clock Set procedure
(refer to page 11 or 12 of the HR-DVS1U’s instruction manual). Auto channel set has already
taken place, and is not affected.
There are some PBS channels that do not transmit clock setting data. If your antenna cable is
properly connected and “– – : – –” is displayed, perform the Manual Clock Set procedure (refer
to page 12 of the HR-DVS1U’s instruction manual). Auto channel setting has not yet taken
place, so please also perform the “Set Receivable Channels” procedure (refer to page 13 of the
HR-DVS1U’s instruction manual).
5
4
During auto channel setting, the channel
numbers are displayed as they are scanned and
set. Receivable channels are automatically
assigned to CH buttons, and non-receivable
channels are skipped.
5
When setting is complete, the VCR displays the
current time. You can now use your VCR.
b–INSTANT TIMER RECORDING
a–BASIC RECORDING
4
4
WATCH A RECORDED PROGRAM
5
5
RECORD A PROGRAM
* You can use the available buttons on the remote control or on the VCR.
1 Load a cassette with the label facing out and the window facing up.
2 Press VHS or DV to select the deck.
3 Press REW or FF to find program start point.
4 Press PLAY to start playback.
5 Press STOP, then press EJECT to remove the cassette.
* You cannot perform ITR using the remote control.
1 Press REC to start recording.
2 Press REC to engage ITR. “0:30” appears in the VCR display.
3 To extend duration in increments of 30 minutes, press REC as many times as necessary.
* You can use the available buttons on the remote control or on the VCR.
1 Load a cassette as above.
2 Press VHS or DV to select the deck.
3 Press CH, or press the appropriate NUMBER keys (remote) and press ENTER (remote),
to select the recording channel.
4 Press SP/EP (remote) to set the recording speed.
5 Press REC and PLAY together (remote) or REC (VCR) to start recording.
6 Press PAUSE to stop recording temporarily, and press PLAY to resume.
7 Press STOP, then press EJECT to remove the cassette.
SP
VCR
123
456
7
89
0
2
4
1
3
T W
DV VHS
POWER
TV/VCRA/B DISPLAY
ENTER/OSD
A.MONITOR
VCR TV CABLE/DBS
CANCEL
TIMER
START STOP DATE CH
C. RESET
DBS
DAILY(M-F)
AUX
WEEKLY
FADE/WIPE
EFFECT ON/OFF
PROG
EXPRESS PROGRAMMING
PROG
CHECK
SP/LP
SP/EP
PLAY
REW
REC
STOP
PAUSE
FF
TV CH +
TV CH —
TV
VOL
+
TV
VOL
M
E
N
U
O
K
JOG/
SHUTTLE
T
I
D
E
.
A
.
R
T
U
O
/
N
I
T
R
A
T
S
DV VHS
DUB
DV IN/OUT
VHSDV
S-VIDEO
PAUSE
VIDEO
A.DUB
INSERT
CH
POWER
EJECT
PLAY
STOP
EJECT
(MONO)L—AUDIO—R
REW
REC PAUSE
FF
POWER
PAUSE
POWER
TV/VCR
PLAY
STOP
REW (Rewind)
REC
FF (Fast-Forward)
PAUSE
SP/EP
CH
+/–
PLAY
STOP
CH
5
REC
DV
EJECT
VHS
EJECT
NUMBER
ENTER
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

JVC IYV*ID*VP User manual

Category
Cassette players
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI